RESUMO
Titanium dioxide is a compound that is used in the food, cosmetic, and paint industries; however, it is still toxic to humans and the environment. This study determined the toxicities of titanium dioxide nanoparticles (TiO2 NPs) in a Caenorhabditis elegans (C. elegans) model. The effects of commercially available (C-TiO2) and synthetically (S-TiO2) prepared TiO2 NP solutions on lethality, lifespan, growth, reproduction, locomotion, and gene expression were studied in C. elegans. Exposure to TiO2 NPs (0.0, 0.01, 0.1, 1.0, and 10 mg/L) did not result in any change to the survival rate or body length of the nematodes, regardless of the concentration. However, there was a decrease in the reproduction (brood size) and locomotion (body bending and head thrashing) of the nematodes as the TiO2 NP concentration increased. The longevity of the nematodes was shortened following TiO2 NP exposure. The gene expression of sod-1, sod-3, ctl-1, ctl-2, cyp35A2, mlt-1, and mlt-2 in the nematodes showed that there was an overexpression of all genes when the worms were exposed to 1 mg/L C-TiO2 or 10 mg/L S-TiO2. It was therefore concluded that compared with S-TiO2, C-TiO2 possibly causes more toxicity or genotoxicity in the C. elegans model.
RESUMO
A phenomenological reaction-diffusion model that includes a nutrient-regulated growth rate of tumor cells is proposed to investigate the morphological instability of solid tumors during the avascular growth. We find that the surface instability could be induced more easily when tumor cells are placed in a harsher nutrient-deficient environment, while the instability is suppressed for tumor cells in a nutrient-rich environment due to the nutrient-regulated proliferation. In addition, the surface instability is shown to be influenced by the growth moving speed of tumor rims. Our analysis reveals that a larger growth movement of the tumor front results in a closer proximity of tumor cells to a nutrient-rich region, which tends to inhibit the surface instability. A nourished length that represents the proximity is defined to illustrate its close relation to the surface instability.
Assuntos
Modelos Biológicos , Neoplasias , Humanos , Neoplasias/patologiaRESUMO
Constructed wetlands are an ecological engineering technology that has been widely applied to treat anthropogenic wastewater. Until now, few studies have focused on soil carbon (C) in the constructed treatment wetlands in tropical regions. Therefore, this study provides insight into the changes in soil C composition of tropically constructed wetlands at different ages. Five constructed wetlands were investigated in northern Kaohsiung, Taiwan. Soil C was analyzed at three different depths using an acid-hydrolysable method. The results showed that soil TOC content was highest on the soil surface (0-2 cm) and decreased at greater soil depths (2-5 and 5-10 cm) in all the studied constructed wetlands. There was more soil acid-hydrolysable C in the older constructed wetlands than in the younger ones at all depths. On the contrary, the soil recalcitrant carbon (RP-C) did not vary much across the wetland soils. In addition, the RP-C to TOC ratios were higher in the younger than older constructed wetlands, implying that the soil bioavailable C sources for microbial growth increased with the wetland's age. As a result, the compositions of organotrophic microbes, such as methanogens (mcrA copies), appeared to increase with wetlands' ages (i.e., negatively correlated with RP-C/TOC), while the total microbial abundance (16S rDNA) and abundance of lithotrophic microbes, such as methanotrophs (pmoA copies), were not correlated with RP-C/TOC or AHPI-C/TOC ratios, based on the results of our canonical correspondence analysis. Furthermore, the constructed wetlands accumulated soil RP-C from 2.33 to 0.08 g C m-2 day-1 in the constructed wetlands 1 to 30 years old, respectively.
Assuntos
Solo , Áreas Alagadas , Carbono/análise , Microbiologia do Solo , TaiwanRESUMO
The individual difference, particularly in drivers' distance perception, is introduced in the microscopic one-dimensional optimal velocity model to investigate its effect on the onset of the jamming instability seen in traffic systems. We show analytically and numerically that the individual difference helps to inhibit the traffic jam at high vehicle densities while it promotes jamming transition at low vehicle densities. In addition, the jamming mechanism is further investigated by tracking how the spatial disturbance travels through traffics. We find that the jamming instability is uniquely determined by the overall distribution of drivers' distance perception rather than the spatial ordering of vehicles. Finally, a generalized form of the optimal velocity function is considered to show the universality of the effect of the individual difference.
RESUMO
Pt nanoparticles were successfully deposited on uncatalyzed carbon paper by the supercritical CO2 deposition (SCD) method using platinum (II) acetylacetonate as a precursor followed by thermal conversion. A full 24 factorial design (four factors, each with two levels) was used to investigate the main effect of four factors (deposition temperature, deposition time, reduction temperature, and reduction time) and the interaction effects between them. The morphological structures and surface properties of the Pt/carbon paper composite were analyzed by X-ray diffraction (XRD), scanning electron microscope (SEM)/energy-dispersive X-ray spectroscopy analyzer (EDS), and high-resolution transmission electron microscopy (HR-TEM). The results of the 24 factorial design showed that Pt loading on the substrate correlated significantly with deposition time, while Pt aggregation slightly increased with the thermal reduction temperature. Data obtained from both XRD and HR-TEM were in good agreement and showed that Pt nanoparticles were homogeneously dispersed on the substrate with diameters of 7.2â»8.7 nm.
RESUMO
An ultrathin planar cavity metasurface is proposed based on ultrathin film interference and its practicability for light manipulation in visible region is experimentally demonstrated. Phase of reflected light is modulated by finely adjusting the thickness of amorphous silicon (a-Si) by a few nanometers on an aluminum (Al) substrate via nontrivial phase shifts at the interfaces and interference of multireflections generated from the planar cavity. A phase shift of π, the basic requirement for two-level phase metasurface systems, can be accomplished with an 8 nm thick difference. For proof of concept, gradient metasurfaces for beam deflection, Fresnel zone plate metalens for light focusing, and metaholograms for image reconstruction are presented, demonstrating polarization-independent and broadband characteristics. This novel mechanism for phase modulation with ultrathin planar cavity provides diverse routes to construct advanced flat optical devices with versatile applications.
RESUMO
The prevalence of carbapenem-resistant Klebsiella pneumoniae (CRKP) was up to 30% between 2014 and 2016 in the study hospital. Of these 77 CRKP isolates, 22 isolates with sequence type ST11 carried the new pKPC_P16 plasmid, a pKPC_LK30 variant, and were widely disseminated between 2014 and 2015 in northern Taiwan.
Assuntos
Carbapenêmicos/farmacologia , Infecções por Klebsiella/epidemiologia , Klebsiella pneumoniae/isolamento & purificação , Resistência beta-Lactâmica , Estudos Transversais , Genótipo , Hospitais , Humanos , Infecções por Klebsiella/microbiologia , Klebsiella pneumoniae/classificação , Klebsiella pneumoniae/efeitos dos fármacos , Klebsiella pneumoniae/genética , Epidemiologia Molecular , Tipagem Molecular , Plasmídeos/análise , Prevalência , Análise de Sequência de DNA , Taiwan/epidemiologiaRESUMO
Metalenses consist of an array of optical nanoantennas on a surface capable of manipulating the properties of an incoming light wavefront. Various flat optical components, such as polarizers, optical imaging encoders, tunable phase modulators and a retroreflector, have been demonstrated using a metalens design. An open issue, especially problematic for colour imaging and display applications, is the correction of chromatic aberration, an intrinsic effect originating from the specific resonance and limited working bandwidth of each nanoantenna. As a result, no metalens has demonstrated full-colour imaging in the visible wavelength. Here, we show a design and fabrication that consists of GaN-based integrated-resonant unit elements to achieve an achromatic metalens operating in the entire visible region in transmission mode. The focal length of our metalenses remains unchanged as the incident wavelength is varied from 400 to 660 nm, demonstrating complete elimination of chromatic aberration at about 49% bandwidth of the central working wavelength. The average efficiency of a metalens with a numerical aperture of 0.106 is about 40% over the whole visible spectrum. We also show some examples of full-colour imaging based on this design.
RESUMO
A correction to this article has been published and is linked from the HTML version of this paper. The error has not been fixed in the paper.
RESUMO
An electron bunch passing through a periodic metal grating can emit Smith-Purcell radiation (SPR). Recently, it has been found that SPR can be locked and enhanced at some emission wavelength and angle by excitation of surface plasmon (SP) on the metal substrate. In this work, the generation of a convergent light beam via using the SP-locked SPR is proposed and investigated by computer simulations. The proposed structure is composed of an insulator-metal-insulator (IMI) substrate with chirped gratings on the substrate. The chirped gratings are designed such that a convergent beam containing a single wavelength is formed directly above the gratings when an electron bunch passes beneath the substrate. The wavelength of the convergent beam changes with the refractive index of dielectric layer of the IMI structure, which is determined by the frequency of SP on the IMI substrate excited by the electron bunch. Moreover, reversing the direction of electron bunch will make the emitted light from the proposed structure to switch from a convergent beam to a divergent beam. Finally, the formation of a convergent beam containing red, green and blue lights just above the chirped gratings is also demonstrated. This work offers potential applications in the fields of optical imaging, optical beam steering, holography, microdisplay, cryptography and light source.
RESUMO
Metasurface-based components are known to be one of the promising candidates for developing flat optical systems. However, their low working efficiency highly limits the use of such flat components for feasible applications. Although the introduction of the metallic mirror has been demonstrated to successfully enhance the efficiency, it is still somehow limited for imaging and sensing applications because they are only available for devices operating in a reflection fashion. Here, we demonstrate three individual GaN-based metalenses working in a transmission window with extremely high operation efficiency at visible light (87%, 91.6%, and 50.6% for blue, green, and red light, respectively). For the proof of concept, a multiplex color router with dielectric metalens, which is capable of guiding individual primary colors into different spatial positions, is experimentally verified based on the design of out-of-plane focusing metalens. Our approach with low-cost, semiconductor fabrication compatibility and high working efficiency characteristics offers a way for establishing a complete set of flat optical components for a wide range of applications such as compact imaging sensors, optical spectroscopy, and high-resolution lithography, just named a few.
RESUMO
Among various flat optical devices, metasurfaces have presented their great ability in efficient manipulation of light fields and have been proposed for variety of devices with specific functionalities. However, due to the high phase dispersion of their building blocks, metasurfaces significantly suffer from large chromatic aberration. Here we propose a design principle to realize achromatic metasurface devices which successfully eliminate the chromatic aberration over a continuous wavelength region from 1200 to 1680 nm for circularly-polarized incidences in a reflection scheme. For this proof-of-concept, we demonstrate broadband achromatic metalenses (with the efficiency on the order of â¼12%) which are capable of focusing light with arbitrary wavelength at the same focal plane. A broadband achromatic gradient metasurface is also implemented, which is able to deflect wide-band light by the same angle. Through this approach, various flat achromatic devices that were previously impossible can be realized, which will allow innovation in full-color detection and imaging.Metasurfaces suffer from large chromatic aberration due to the high phase dispersion of their building blocks, limiting their applications. Here, Wang et al. design achromatic metasurface devices which eliminate the chromatic aberration over a continuous region from 1200 to 1680 nm in a reflection schleme.
RESUMO
Plasmonic Archimedean spiral modes on concentric silver (Ag) ring gratings are investigated by FDTD simulations and theoretical analyses. These modes are generated by placing the ring grating under an Ag nanorod to extract the orbital angular momentum (OAM) of spiral surface plasmon (SSP) modes on the nanorod and transform it into the orbital motion of SP on the grating. The formation of Archimedean spiral patterns is ascribed to two factors: both the r- and θ-directional wavevectors are conserved for SSP on nanorod coupling into SP on ring grating and both the r- and θ-directional velocities of SP keep unchanged when it propagates on the ring grating. The number of strands of Archimedean spiral pattern is determined by the topological charge of SSP mode. The plasmonic Archimedean spiral modes have potential applications in the fields of data storage, dielectric microparticle manipulation, biosensing and directional switching.
RESUMO
This study applies a receptor model to quantify source contributions to ambient concentration of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) and inhalation cancer risk in Taipei from 2003 through 2009. Seventeen PCDD/F congeners were used in the effective variance solution to the Chemical Mass Balance equations to estimate source-specific mass contributions and inhalation risks. The average total PCDD/F concentration was 0.611pg/Nm(3) (0.036pg I-TEQ/Nm(3)). Traffic emissions contributed the most to the PCDD/F concentration (55.7%), followed by waste incinerators (18.6%) and joss stick burning (9.6%). For the inhalation cancer risk, the average was 1.1×10(-6) with traffic, waste incinerators, and joss paper burning as the main contributors (67.3%, 19.4%, and 6.3%, respectively). The mass and risk contributions of waste incinerators decreased significantly from 2003 to 2009 and were higher at downwind sites than at upwind sites. Reducing PCDD/F emissions from traffic and waste incinerators would provide the greatest health benefit. Policies that reduce the uncontrolled burning of joss stick and joss paper also need to be implemented.
RESUMO
Municipal solid waste incinerators (MSWIs) have long been the major contributors of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) to ambient air in Taiwan. After stringent MSWI emission standards were introduced in 2001, the long-term continuous monitoring of flue gas and ambient air quality became necessary to ensure the effectiveness of the related control strategies. Three MSWIs and the surrounding ambient air were investigated in the current study for PCDD/F characteristics during 2006 to 2011. The average concentrations in the flue gas ranged from 0.008 ~ 0.0488 ng I-TEQ/Nm(3), which is much less than the emission standard in Taiwan (0.1 ng I-TEQ/Nm(3)) (I-TEQ is the abbreviation of International Toxic Equivalent). This led to extremely low levels in the ambient air, 0.0255 pg I-TEQ/Nm(3), much less than the levels seen in most urban areas around the world. Additionally, the results obtained using the Industrial Source Complex Short-Term Dispersion Model (ISCST3) indicate that the PCDD/F contributions from the three MSWIs to the ambient air were only in the range from 0.164 ~ 0.723 %. Principal component analysis (PCA) showed that the PCDD/Fs in the air samples had very similar characteristics to those from mobile sources. The results thus show that stringent regulations have been an effective control strategy, especially for urban areas, such as Taipei City.
Assuntos
Poluentes Atmosféricos/análise , Benzofuranos/análise , Dioxinas/análise , Monitoramento Ambiental , Resíduos Sólidos/análise , Incineração , Modelos Teóricos , TaiwanRESUMO
The purpose of this study was to investigate the effects of sintering atmosphere (oxidizing and reducing) on the polymorphs of dicalcium silicates (Ca2SiO4, C2S) and on the chromium leaching of the belite-rich clinkers made from a chromium-bearing sludge. This sludge was generated in an electroplating factory, and in addition to chromium, it contained nickel, copper and zinc. In the clinker production, air was used as the oxidizing atmosphere, and carbon monoxide, which was produced by burning graphite with an insufficient amount of oxygen, was employed as the reducing atmosphere. Dicalcium silicates were substantially formed under both kinds of sintering atmosphere, but there was some nonhydraulic gamma-C2S in the clinkers produced under the oxidizing atmosphere. In addition, the amount of gamma-C2S decreased with the chromium-bearing sludge addition, whereas that of beta-C2S increased. The clinkers produced under the reducing atmosphere had less residual chromium, a finding that shows that more chromium was evaporated. However, the reducing atmosphere can decrease the proportion of hexavalent chromium (Cr(VI)) in the resulting clinkers. For other heavy metals, the residual amounts of nickel and copper generally increased with the sludge addition, but zinc was absent in most of the clinkers produced under the reducing atmosphere. This implies that the evaporation of zinc is much more significant than that of the other heavy metals under a reducing atmosphere. In the leaching tests, the concentrations of nickel, copper, and zinc were below the detection limits in all the leachates. In terms of chromium, the total leaching concentration was highly related to Cr(VI). The clinkers produced under the oxidizing atmosphere had high leaching concentrations of chromium, and thus failed to meet the regulatory limit. In contrast, the reducing atmosphere was effective in decreasing the chromium leaching, and it therefore makes the resulting cement clinkers more environmentally sound.
Assuntos
Cromo/química , Materiais de Construção/análise , Poluentes Ambientais/química , Resíduos Industriais , Compostos de Cálcio/química , Galvanoplastia , Resíduos Industriais/análise , Metais Pesados/química , Oxirredução , Silicatos/química , Difração de Raios XRESUMO
The purpose of this study was to investigate the hydration and leaching characteristics of the pastes of belite-rich cements made from electroplating sludge. The compressive strength of the pastes cured for 1, 3, 7, 28, and 90 days was determined, and the condensation of silicate anions in hydrates was examined with the (29)Si nuclear magnetic resonance (NMR) technology. The leachabilities of the electroplating sludge and the hardened pastes were studied with the multiple toxicity characteristic leaching procedure (MTCLP) and the tank leaching test (NEN 7345), respectively. The results showed that the electroplating sludge continued to leach heavy metals, including nickel, copper, and zinc, and posed a serious threat to the environment. The belite-rich cement made from the electroplating sludge was abundant in hydraulic ß-dicalcium silicate, and it performed well with regard to compressive-strength development when properly blended with ordinary Portland cements. The blended cement containing up to 40% the belite-rich cement can still satisfy the compressive-strength requirements of ASTM standards, and the pastes cured for 90 days had comparable compressive strength to an ordinary Portland cement paste. It was also found that the later hydration reaction of the blended cements was relatively more active, and high fractions of belite-rich cement increased the chain length of silicate hydrates. In addition, by converting the sludge into belite-rich cements, the heavy metals became stable in the hardened cement pastes. This study thus indicates a viable alternative approach to dealing with heavy metal bearing wastes, and the resulting products show good compressive strength and heavy-metal stability.
Assuntos
Materiais de Construção/análise , Galvanoplastia , Cimentos de Ionômeros de Vidro/química , Eliminação de Resíduos Líquidos/métodos , Resíduos/análise , Zeolitas/química , Teste de Materiais , Metais Pesados/análiseRESUMO
This work develops a comprehensive approach for quantitatively analyzing polychlorinated and polybrominated dibenzo-p-dioxins (PCDDs/PBDDs), dibenzofurans (PCDFs/PBDFs), biphenyls (PCBs/PBBs) and diphenyl ethers (PBDEs). This technique, based on multiple (silica, alumina, and active carbon) columns, can be applied to prepare samples for determining the five group compounds based on high-resolution gas chromatography/high-resolution mass spectrometry. The method was also validated by analyses of blank and spiked samples. In the sampled air, the mean PCDD/F, PCB, PBDD/F, PBDE, and PBB concentrations were 59.6 fg WHO-TEQ Nm(-3), 6.74 fg WHO-TEQ Nm(-3), 12.2 fg WHO-TEQ Nm(-3), 52100 fg Nm(-3), and 341 fg Nm(-3), respectively. The WHO-TEQ of dioxin-like PCB and PBDD/Fs counted for 8.9% and 16% of total TEQ (summed over PCDD/Fs, PBDD/Fs, and dioxin-like PCBs), respectively, suggesting that the atmospheric concentrations of dioxin and dioxin-like compounds should be regulated together because of the persistence and toxicity of PBDD/Fs and dioxin-like PCBs.
Assuntos
Atmosfera/análise , Benzofuranos/análise , Compostos de Bifenilo/análise , Dioxinas/análise , Cromatografia Gasosa-Espectrometria de Massas/métodos , Éteres Difenil Halogenados/análise , Monitoramento Ambiental/métodos , Incineração , Dibenzodioxinas Policloradas/análogos & derivados , Dibenzodioxinas Policloradas/análiseRESUMO
Thermal treatment technology was used to remove polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) from heavily contaminated soil. For a soil with an original PCDD/F content of 35,970ng International Toxic Equivalents (I-TEQ)/kg, >99.99% PCDD/F removal efficiency was obtained with a primary furnace at two different treatment temperatures (750 degrees C and 850 degrees C), while a secondary furnace at 1200 degrees C gave >98% decomposition efficiency. The total PCDD/F I-TEQ contents in treated soils at 750 degrees C and 850 degrees C were 1.56ngI-TEQ/kg and 2.15ngI-TEQ/kg, respectively, which were far below the soil pollution standard of Taiwan (1000ngI-TEQ/kg soil). Although air pollution control devices had significant effects on the removal of PCDD/Fs, the total I-TEQ concentrations in the upstream flue gas of PUF cartridge at 750 degrees C and 850 degrees C (2.61ngI-TEQ/Nm(3) and 2.38ngI-TEQ/Nm(3), respectively) were still higher than the stationary emission limit of the Taiwan EPA (0.5ngI-TEQ/Nm(3)). The above results also suggested that additional APCDs, such as activated carbon injection in front of the filter are needed to enhance PCDD/F removal efficiency.
Assuntos
Benzofuranos/química , Dibenzodioxinas Policloradas/análogos & derivados , Poluentes do Solo/análise , Recuperação e Remediação Ambiental , Temperatura Alta , Dibenzodioxinas Policloradas/química , TemperaturaRESUMO
Different approaches were carried out in this work to assess environmental impacts of a municipal solid waste incinerator. A total of seven sites in the vicinity of the facility were chosen to collect air, banyan leaf and soil samples for analyses of PCDD/Fs by high-resolution gas chromatography/high-resolution mass spectrometry. Based on the PCDD/F concentrations of the three matrices determined at sites upwind, downwind and area of maximum ground concentration, it was found that the environmental impact of the MSWI was not obvious. PCDD/F concentration isopleths of the three environmental compartments coupled with wind rose of the region proved that the influence of the MSWI on the environment was also rather limited. It clarified emission sources by confirming that the PCDD/F concentrations originated mostly from the existing stationary emission sources in the vicinity. Through principal component and cluster analyses on congener profiles, the influence of metallurgical facilities and medical waste incinerators on the ambient air was assessed. Moreover, the modeling of ISCST3 demonstrated also that the contribution of the MSWI to ambient atmospheric PCDD/Fs was minimal. The approaches studied have led to identical conclusions, and thus are useful to cross-evaluate the environmental impact of an MSWI.