Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 20 de 30
Filtrar
Mais filtros










Base de dados
Intervalo de ano de publicação
1.
Eur J Pharm Sci ; 195: 106712, 2024 Apr 01.
Artigo em Inglês | MEDLINE | ID: mdl-38290611

RESUMO

Anxiety disorders are highly prevalent worldwide and can affect people of all ages, genders and backgrounds. Much efforts and resources have been directed at finding new anxiolytic agents and drug delivery systems (DDSs) especially for cancer patients to enhance targeted drug delivery, reduce drug adverse effects, and provide an analgesic effect. The aim of this study was (1) to design and develop novel nanofiber-based DDSs intended for the oral administration of new 1,2,3-triazolo-1,4-benzodiazepines derivatives, (2) to investigate the physical solid-state properties of such drug-loaded nanofibers, and (3) to gain knowledge of the anxiolytic activity of the present new benzodiazepines in rodents in vivo. The nanofibers loaded with 1,2,3-triazolo-1,4-benzodiazepine derivatives were prepared by means of electrospinning (ES). Field-emission scanning electron microscopy and attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy were used for the physicochemical characterization of nanofibers. The anxiolytic activity of new derivatives and drug-loaded nanofibers was studied with an elevated plus maze test and light-dark box test. New 1,2,3-triazolo-1,4-benzodiazepine derivatives showed a promising anxiolytic effect in mice with clear changes in behavioral reactions in both tests. The nanofiber-based DDS was found to be feasible in the oral delivery of the present benzodiazepine derivatives. The nanofibers generated by means of ES presented the diameter in a nanoscale, uniform fiber structure, capacity for drug loading, and the absence of defects. The present findings provide new insights in the drug treatment of anxiety disorders with new benzodiazepine derivatives.


Assuntos
Ansiolíticos , Nanofibras , Humanos , Feminino , Masculino , Camundongos , Animais , Nanofibras/química , Benzodiazepinas , Hipnóticos e Sedativos , Anticonvulsivantes , Sistemas de Liberação de Medicamentos
2.
Eur J Pharm Sci ; 192: 106648, 2024 Jan 01.
Artigo em Inglês | MEDLINE | ID: mdl-37992909

RESUMO

Conventional wound infection treatments neither actively promote wound healing nor address the growing problem of antibacterial resistance. Antimicrobial peptides (AMPs) are natural defense molecules, released from host cells, which may be rapidly bactericidal, modulate host-immune responses, and/or act as endogenous mediators for wound healing. However, their routine clinical use has hitherto been hindered due to their instability in the wound environment. Here we describe an electrospun carrier system for topical application of pleurocidin, demonstrating sufficient AMP release from matrices to kill wound-associated pathogens including Acinetobacter baumannii and Pseudomonas aeruginosa. Pleurocidin can be incorporated into polyvinyl alcohol (PVA) fiber matrices, using coaxial electrospinning, without major drug loss with a peptide content of 0.7% w/w predicted sufficient to kill most wound associated species. Pleurocidin retains its activity on release from the electrospun fiber matrix and completely inhibits growth of two strains of A. baumannii (AYE; ATCC 17978) and other ESKAPE pathogens. Inhibition of P. aeruginosa strains (PAO1; NCTC 13437) is, however, matrix weight per volume dependent, with only larger/thicker matrices maintaining complete inhibition. The resulting estimation of pleurocidin release from the matrix reveals high efficiency, facilitating a greater AMP potency. Wound matrices are often applied in parallel or sequentially with the use of standard wound care with biocides, therefore the presence and effect of biocides on pleurocidin potency was tested. It was revealed that combinations displayed additive or modestly synergistic effects depending on the biocide and pathogens which should be considered during the therapy. Taken together, we show that electrospun, pleurocidin-loaded wound matrices have potential to be investigated for wound infection treatment.


Assuntos
Desinfetantes , Infecção dos Ferimentos , Humanos , Proteínas de Peixes/farmacologia , Bactérias , Antibacterianos/farmacologia , Antibacterianos/química , Desinfetantes/farmacologia , Infecção dos Ferimentos/tratamento farmacológico
3.
Eur J Pharm Sci ; 187: 106487, 2023 Aug 01.
Artigo em Inglês | MEDLINE | ID: mdl-37277046

RESUMO

Overcoming the health threatening consequences of staphylococcal infections and their negative socio-economic effects have become a priority in the medical, pharmaceutical, food and many other sectors globally. Staphylococcal infections are a big challenge for a global health care, since they are difficult to be diagnosed and treated. Therefore, the development of new medicinal products of plant-origin is timely and important, because bacteria have a limited ability to develop resistance to such products. In the present study, a modified eucalypt (Eucalyptus viminalis L.) extract was prepared and further enhanced by using different excipients (surface active agents) to obtain a water-miscible 3D-printable extract (nanoemulsified aqueous eucalypt extract). Phytochemical and antibacterial studies of the eucalypt leaves extracts were conducted as a preliminary investigation for 3D-printing experiments of the extracts. The nanoemulsified aqueous eucalypt extract was mixed with polyethylene oxide (PEO) to form a gel applicable for semi-solid extrusion (SSE) 3D printing. The key process parameters in a 3D-printing process were identified and verified. The printing quality of the 3D-lattice type eucalypt extract preparations was very good, demonstrating the feasibility of using an aqueous gel in SSE 3D printing also exhibiting compatibility of the carrier polymer (PEO) with the plant extract. The SSE 3D-printed eucalypt extract preparations presented a rapid dissolution in water within 10-15 min, suggesting the applicability of these preparations e.g., in oral immediate-release applications.


Assuntos
Anti-Infecciosos , Infecções Estafilocócicas , Humanos , Liberação Controlada de Fármacos , Polietilenoglicóis , Impressão Tridimensional , Preparações Farmacêuticas , Tecnologia Farmacêutica , Comprimidos
4.
Pharmaceutics ; 14(5)2022 Apr 26.
Artigo em Inglês | MEDLINE | ID: mdl-35631527

RESUMO

The incidence of type I diabetes has been increasing worldwide at an annual rate of approximately 3%. One of the strategies to treat type I diabetes is islet transplantation, in which damaged ß-cells are replaced with new islets. To improve ß-cells' expansion and pseudoislet formation, studies are focusing on using extracellular-matrix-resembling substrates. We evaluated the potential of salmon fibrinogen and chitosan electrospun scaffold as cell substrate for cultivating MIN-6 cells. The morphology of cells, insulin secretion and gene expression was evaluated and compared with other substrates (nanofibrous scaffold, microporous scaffold and tissue culture polystyrene). We found that all tested 3D conditions favored the pseudoislet formation of MIN-6 cells. The insulin secretion of MIN-6 cells after stimulation with high-glucose media shows approximately a 9-fold increase compared to the control group when a fibrinogen/chitosan-based electrospun scaffold was used for cultivation. The differences in insulin secretion were corroborated by differences in gene expression. The differences in insulin secretion could probably be attributed to the differences in the mechanical and/or chemical nature of the tested substrates.

5.
Int J Pharm ; 616: 121558, 2022 Mar 25.
Artigo em Inglês | MEDLINE | ID: mdl-35143904

RESUMO

Theophylline (TEO) nanofibers with polyethylene oxide (PEO) were prepared by conventional electrospinning (ES) and novel needleless ultrasound-enhanced electrospinning (USES). They were compared for Young's modulus, elongation at rupture and rupture stress, tabletability and drug release. Placebo (PEO) or drug-loaded (PEO/TEO 90:10) nanofibers were examined by scanning electron microscopy (SEM), powder X-ray diffraction (PXRD), differential scanning calorimetry (DSC) and infrared spectroscopy (ATR-FTIR). Nanofibers prepared by USES were thinner than ES nanofibers and drug-loaded nanofibers thinner than placebo. Drug was mostly amorphous and interacted weakly with PEO. Mats generated by USES and also drug-loaded mats demonstrated higher Young's modulus (stiffness) and higher rupture stress. Under compression, USES and drug-loaded nanofibers demonstrated greater compaction work, higher yield pressure (Heckel and K-L models), and produced stronger tablets than ES and placebo respectively. Principal Component Analysis revealed two significant components explaining 91.05% of the variance. The first comprised the compaction work, yield pressure (ductility) and Young's modulus that were positively intercorrelated and elongation at rupture that was correlated negatively. The second comprised the mat rupture stress and tablet breaking load. Drug release from nanofibrous tablets was faster than tablets of physical mixture but there was no difference between the tablets of the two electrospinning methods.


Assuntos
Nanofibras , Liberação Controlada de Fármacos , Nanofibras/química , Polietilenoglicóis/química , Comprimidos , Teofilina
6.
Pharmaceutics ; 13(11)2021 Oct 20.
Artigo em Inglês | MEDLINE | ID: mdl-34834157

RESUMO

The hydration of phospholipids, electrospun into polymeric nanofibers and used as templates for liposome formation, offers pharmaceutical advantages as it avoids the storage of liposomes as aqueous dispersions. The objective of the present study was to electrospin and characterize amphiphilic nanofibers as templates for the preparation of antibiotic-loaded liposomes and compare this method with the conventional film-hydration method followed by extrusion. The comparison was based on particle size, encapsulation efficiency and drug-release behavior. Chloramphenicol (CAM) was used at different concentrations as a model antibacterial drug. Phosphatidylcoline (PC) with polyvinylpyrrolidone (PVP), using ethanol as a solvent, was found to be successful in fabricating the amphiphilic composite drug-loaded nanofibers as well as liposomes with both methods. The characterization of the nanofiber templates revealed that fiber diameter did not affect the liposome size. According to the optical microscopy results, the immediate hydration of phospholipids deposited on the amphiphilic nanofibers occurred within a few seconds, resulting in the formation of liposomes in water dispersions. The liposomes appeared to aggregate more readily in the concentrated than in the diluted solutions. The drug encapsulation efficiency for the fiber-hydrated liposomes varied between 14.9 and 28.1% and, for film-hydrated liposomes, between 22.0 and 77.1%, depending on the CAM concentrations and additional extrusion steps. The nanofiber hydration method was faster, as less steps were required for the in-situ liposome preparation than in the film-hydration method. The liposomes obtained using nanofiber hydration were smaller and more homogeneous than the conventional liposomes, but less drug was encapsulated.

7.
Molecules ; 26(9)2021 Apr 29.
Artigo em Inglês | MEDLINE | ID: mdl-33946815

RESUMO

Berberine (BBR) is a poorly water-soluble quaternary isoquinoline alkaloid of plant origin with potential uses in the drug therapy of hypercholesterolemia. To tackle the limitations associated with the oral therapeutic use of BBR (such as a first-pass metabolism and poor absorption), BBR-loaded liposomes were fabricated by ethanol-injection and thin-film hydration methods. The size and size distribution, polydispersity index (PDI), solid-state properties, entrapment efficiency (EE) and in vitro drug release of liposomes were investigated. The BBR-loaded liposomes prepared by ethanol-injection and thin-film hydration methods presented an average liposome size ranging from 50 nm to 244 nm and from 111 nm to 449 nm, respectively. The PDI values for the liposomes were less than 0.3, suggesting a narrow size distribution. The EE of liposomes ranged from 56% to 92%. Poorly water-soluble BBR was found to accumulate in the bi-layered phospholipid membrane of the liposomes prepared by the thin-film hydration method. The BBR-loaded liposomes generated by both nanofabrication methods presented extended drug release behavior in vitro. In conclusion, both ethanol-injection and thin-film hydration nanofabrication methods are feasible for generating BBR-loaded oral liposomes with a uniform size, high EE and modified drug release behavior in vitro.


Assuntos
Berberina/administração & dosagem , Berberina/química , Composição de Medicamentos , Lipossomos , Nanopartículas , Administração Oral , Fenômenos Químicos , Lipossomos/química , Estrutura Molecular , Nanopartículas/química , Nanopartículas/ultraestrutura , Tamanho da Partícula , Solubilidade
8.
Eur J Pharm Sci ; 158: 105619, 2021 Mar 01.
Artigo em Inglês | MEDLINE | ID: mdl-33115676

RESUMO

Hot-melt extruded (HME) filaments are an essential intermediate product for the three- dimensional (3D) printing of drug delivery systems (DDSs) by the fused deposition modelling (FDM) process. The aim of this study was to design novel polymeric 3D-printable HME filaments loaded with active pharmaceutical ingredients (APIs). The physical solid-state properties, mechanical properties, drug release and short-term storage stability of the filaments and 3D-printed DDSs were studied. Physical powder mixtures of polycaprolactone (PCL), plasticizer and API were manually blended, extruded by a single-screw extruder, and printed by a table-top FDM 3D-printing system. The composition of PCL and arabic gum (ARA) enabled the incorporation of 20%, 30% and 40% (w/w) of indomethacin (IND) and theophylline (THEO) into the HME filaments. The uneven distribution of API throughout the filaments impaired 3D printing. The HME filaments loaded with 20% IND or THEO were selected for the further analysis and printing tests (the ratio of PCL, ARA and IND or THEO was 7:1:2, respectively). The IND filaments were yellowish, mechanically strong and flexible, and they had a uniform filament diameter and smooth outer surface. The filaments containing THEO were smooth and off-white. The 3D-printed tablets fabricated from IND or THEO-loaded filaments showed sustained drug release in vitro. The drug release rate, however, significantly increased by changing the geometry of 3D-printed tablets from a conventional tablet structure to an unorthodox lattice ("honeycomb") structure. Overall, the combination of PCL and ARA provides an interesting novel polymeric carrier system for 3D-printable HME filaments and tablets.


Assuntos
Poliésteres , Impressão Tridimensional , Liberação Controlada de Fármacos , Comprimidos , Tecnologia Farmacêutica
9.
ACS Omega ; 5(46): 30011-30022, 2020 Nov 24.
Artigo em Inglês | MEDLINE | ID: mdl-33251437

RESUMO

Electrospun fiber scaffolds have a huge potential for the successful treatment of infected wounds based on their unique properties. Although several studies report novel drug-loaded electrospun fiber-based biomaterials, many of these do not provide information on their interactions with eukaryotic and bacterial cells. The main aim of this study was to develop antibacterial drug-loaded porous biocompatible polycaprolactone (PCL) fiber scaffolds mimicking the native extracellular matrix for wound healing purposes. Mechanical property evaluation and different biorelevant tests were conducted in order to understand the structure-activity relationships and reveal how the surface porosity of fibers and the fiber diameter affect the scaffold interactions with the living bacterial and eukaryotic fibroblast cells. Cell migration and proliferation assays and antibiofilm assays enabled us to enlighten the biocompatibility and safety of fiber scaffolds and their suitability to be used as scaffolds for the treatment of infected wounds. Here, we report that porous PCL microfiber scaffolds obtained using electrospinning at high relative humidity served as the best surfaces for fibroblast attachment and growth compared to the nonporous microfiber or nonporous nanofiber PCL scaffolds. Porous chloramphenicol-loaded microfiber scaffolds were more elastic compared to nonporous scaffolds and had the highest antibiofilm activity. The results indicate that in addition to the fiber diameter and fiber scaffold porosity, the single-fiber surface porosity and its effect on drug release, mechanical properties, cell viability, and antibiofilm activity need to be understood when developing antibacterial biocompatible scaffolds for wound healing applications. We show that pores on single fibers within an electrospun scaffold, in addition to nano- and microscale diameter of the fibers, change the living cell-fiber interactions affecting the antibiofilm efficacy and biocompatibility of the scaffolds for the local treatment of wounds.

10.
Pharmaceutics ; 11(10)2019 Sep 29.
Artigo em Inglês | MEDLINE | ID: mdl-31569535

RESUMO

Haemanthamine (HAE) has been proven as a potential anticancer agent. However, the therapeutic use of this plant-origin alkaloid to date is limited due to the chemical instability and poorly water-soluble characteristics of the agent. To overcome these challenges, we developed novel amphiphilic electrospun nanofibers (NFs) loaded with HAE, phosphatidylcholine (PC) and polyvinylpyrrolidone (PVP), and intended for a stabilizing platform (template) of self-assembled liposomes of the active agent. The NFs were fabricated with a solvent-based electrospinning method. The chemical structure of HAE and the geometric properties, molecular interactions and physical solid-state properties of the NFs were investigated using nuclear magnetic resonance (NMR) spectroscopy, scanning electron microscopy (SEM), photon correlation spectroscopy (PCS), Fourier transform infrared (FTIR) spectroscopy, X-ray powder diffraction (XRPD) and differential scanning calorimetry (DSC), respectively. An in-house dialysis-based dissolution method was used to investigate the drug release in vitro. The HAE-loaded fibers showed a nanoscale size ranging from 197 nm to 534 nm. The liposomes with a diameter between 63 nm and 401 nm were spontaneously formed as the NFs were exposed to water. HAE dispersed inside liposomes showed a tri-modal dissolution behavior. In conclusion, the present amphiphilic NFs loaded with HAE are an alternative approach for the formulation of a liposomal drug delivery system and stabilization of the liposomes of the present alkaloid.

11.
Pharmaceutics ; 11(10)2019 Sep 26.
Artigo em Inglês | MEDLINE | ID: mdl-31561640

RESUMO

We investigated nozzleless ultrasound-enhanced electrospinning (USES) as means to generate nanofibrous drug delivery systems (DDSs) for pharmaceutical and biomedical applications. Traditional electrospinning (TES) equipped with a conventional spinneret was used as a reference method. High-molecular polyethylene oxide (PEO) and chitosan were used as carrier polymers and theophylline anhydrate as a water-soluble model drug. The nanofibers were electrospun with the diluted mixture (7:3) of aqueous acetic acid (90% v/v) and formic acid solution (90% v/v) (with a total solid content of 3% w/v). The fiber diameter and morphology of the nanofibrous DDSs were modulated by varying ultrasonic parameters in the USES process (i.e., frequency, pulse repetition frequency and cycles per pulse). We found that the USES technology produced nanofibers with higher fiber diameter (402 ± 127 nm) than TES (77 ± 21 nm). An increase of a burst count in USES increased the fiber diameter (555 ± 265 nm) and the variation in fiber size. The slight-to-moderate changes in a solid state (crystallinity) were detected when compared the nanofibers generated by TES and USES. In conclusion, USES provides a promising alternative for aqueous-based fabrication of nanofibrous DDSs for pharmaceutical and biomedical applications.

12.
Pharmaceutics ; 11(10)2019 Sep 24.
Artigo em Inglês | MEDLINE | ID: mdl-31554258

RESUMO

We investigated and monitored in situ the wetting and dissolution properties of polymeric nanofibers and determined the solid-state of a drug during dissolution. Piroxicam (PRX) was used as a low-dose and poorly-soluble model drug, and hydroxypropyl methylcellulose (HPMC) and polydextrose (PD) were used as carrier polymers for electrospinning (ES). The initial-stage dissolution of the nanofibers was monitored in situ with three-dimensional white light microscopic interferometry (SWLI) and high-resolution optical microscopy. The physical solid-state characterization of nanofibers was performed with Raman spectroscopy, X-ray powder diffraction (XRPD), and scanning electron microscopy (SEM). We showed that PRX recrystallizes in a microcrystalline form immediately after wetting of nanofibers, which could lead to enhanced dissolution of drug. Initiation of crystal formation was detected by SWLI, indicating: (1) that PRX was partially released from the nanofibers, and (2) that the solid-state form of PRX changed from amorphous to crystalline. The amount, shape, and size of the PRX crystals depended on the carrier polymer used in the nanofibers and dissolution media (pH). In conclusion, the present nanofibers loaded with PRX exhibit a quasi-dynamic dissolution via recrystallization. SWLI enables a rapid, non-contacting, and non-destructive method for in situ monitoring the early-stage dissolution of nanofibers and regional mapping of crystalline changes (re-crystallization) during wetting. Such analysis is crucial because the wetting and dissolution of nanofibers can greatly influence the performance of nanofibrous drug delivery systems in pharmaceutical and biomedical applications.

13.
J Mater Sci Mater Med ; 29(12): 182, 2018 Nov 30.
Artigo em Inglês | MEDLINE | ID: mdl-30506370

RESUMO

3D fibrous scaffolds have received much recent attention in regenerative medicine. Use of fibrous scaffolds has shown promising results in tissue engineering and wound healing. Here we report the development and properties of a novel fibrous scaffold that is useful for promoting wound healing. A scaffold made of salmon fibrinogen and chitosan is produced by electrospinning, resulting in a biocompatible material mimicking the structure of the native extracellular matrix (ECM) with suitable biochemical and mechanical properties. The scaffold is produced without the need for enzymes, in particular thrombin, but is fully compatible with their addition if needed. Human dermal fibroblasts cultured on this scaffold showed progressive proliferation for 14 days. Split-thickness experimental skin wounds treated and untreated were compared in a 10-day follow-up period. Wound healing was more effective using the fibrinogen-chitosan scaffold than in untreated wounds. This scaffold could be applicable in various medical purposes including surgery, tissue regeneration, burns, traumatic injuries, and 3D cell culture platforms.


Assuntos
Quitosana/química , Fibrinogênio/química , Salmão , Alicerces Teciduais/química , Animais , Materiais Biocompatíveis , Proliferação de Células/fisiologia , Técnicas Eletroquímicas , Fibroblastos/fisiologia , Humanos , Ratos , Propriedades de Superfície , Engenharia Tecidual , Cicatrização
14.
Eur J Pharm Sci ; 121: 260-268, 2018 08 30.
Artigo em Inglês | MEDLINE | ID: mdl-29883725

RESUMO

The present study introduces a modified melt-electrospinning (MES) method for fabricating the melt-electrospun fibers (MSFs) of a poorly water-soluble drug and carrier polymer. The MES of poorly water-soluble model drug indomethacin (IND) and hydrophilic carrier polymer, Soluplus® (SOL) were prepared at a 1:3 drug-polymer weight ratio. Water was used as an external plasticizer to regulate a MES processing temperature and to improve fiber formation. The fiber size, surface morphology, physical solid state, drug-polymer (carrier) interactions, thermal and chemical stability and dissolution behavior of MSFs were investigated. Solid state nuclear magnetic resonance spectroscopy (NMR) was used to measure T1(1H), and the domain size of IND in MSFs (25-100 nm) was calculated from these results. Solid-state and thermal analysis confirmed the presence of amorphous solid dispersions of IND and SOL. IND was found to be chemically stable during an entire MES process. Only small drug content variability of different MSF batches was detected with high performace liquid chromatography (HPLC). Given findings were verified with the liquid NMR spectroscopy. The dissolution of MSFs was significantly faster than that of physical mixtures (PMs) or pure drug. The enhanced dissolution of MSFs was caused by high surface area, amorphous state of the drug and solubilizing properties of the carrier polymer (SOL).


Assuntos
Composição de Medicamentos/métodos , Liberação Controlada de Fármacos , Estabilidade de Medicamentos , Indometacina/química , Polietilenoglicóis/química , Polivinil/química , Solubilidade , Água/química
15.
Sci Rep ; 8(1): 4437, 2018 03 13.
Artigo em Inglês | MEDLINE | ID: mdl-29535342

RESUMO

Electrospinning is commonly used to produce polymeric nanofibers. Potential applications for such fibers include novel drug delivery systems, tissue engineering scaffolds, and filters. Electrospinning, however, has shortcomings such as needle clogging and limited ability to control the fiber-properties in a non-chemical manner. This study reports on an orifice-less technique that employs high-intensity focused ultrasound, i.e. ultrasound-enhanced electrospinning. Ultrasound bursts were used to generate a liquid protrusion with a Taylor cone from the surface of a polymer solution of polyethylene oxide. When the polymer was charged with a high negative voltage, nanofibers jetted off from the tip of the protrusion landed on an electrically grounded target held at a constant distance from the tip. Controlling the ultrasound characteristics permitted physical modification of the nanofiber topography at will without using supplemental chemical intervention. Possible applications of tailor-made fibers generated by ultrasound-enhanced electrospinning include pharmaceutical controlled-release applications and biomedical scaffolds with spatial gradients in fiber thickness and mechanical properties.

16.
Int J Pharm ; 541(1-2): 188-197, 2018 Apr 25.
Artigo em Inglês | MEDLINE | ID: mdl-29481945

RESUMO

Solid dispersions (SDs) hold a proven potential in formulating poorly water-soluble drugs. The present paper investigates the interfacial phenomena associated with the bulk powder flow, water sorption, wetting and dissolution of the SDs prepared by a modified melt and quench-cooling (QC) method. Poorly water-soluble indomethacin (IND) was QC molten with solubilizing graft copolymer (Soluplus®) or polyol sugar alcohol (xylitol, XYL). The interfacial interactions of SDs with air/water were found to be reliant on the type (amorphous/crystalline) and amount of the carrier material used. The final SDs were composed of fused agglomerates (SOL) or large jagged particles (XYL) with good wetting and powder flow properties. The initial dissolution of IND was accelerated by both carrier materials studied. The QC molten SDs with amorphous Soluplus® significantly improved the dissolution rate of IND at pH 6.8 (79.9 ±â€¯0.2% at 30 min) compared to that of pure crystalline drug. The substantial improvement in the dissolution rate of IND was in connection with the amorphous state of the drug being stabilized by Soluplus® in the QC molten SDs. However, it is evident that a strong H-bond formation between the components in some regions of the QC molten SDs can limit the dissolution of IND. The QC molten two-phase SDs with a polyol carrier (XYL) showed rapid and continuous drug release without reaching a plateau.


Assuntos
Portadores de Fármacos/química , Composição de Medicamentos/métodos , Liberação Controlada de Fármacos , Indometacina/farmacocinética , Química Farmacêutica , Estabilidade de Medicamentos , Excipientes/química , Indometacina/química , Transição de Fase , Polietilenoglicóis/química , Polivinil/química , Pós , Solubilidade , Xilitol/química
17.
Mol Pharm ; 14(12): 4417-4430, 2017 12 04.
Artigo em Inglês | MEDLINE | ID: mdl-29099601

RESUMO

Antibacterial drug-loaded electrospun nano- and microfibrous dressings are of major interest as novel topical drug delivery systems in wound care. In this study, chloramphenicol (CAM)-loaded polycaprolactone (PCL) and PCL/poly(ethylene oxide) (PEO) fiber mats were electrospun and characterized in terms of morphology, drug distribution, physicochemical properties, drug release, swelling, cytotoxicity, and antibacterial activity. Computational modeling together with physicochemical analysis helped to elucidate possible interactions between the drug and carrier polymers. Strong interactions between PCL and CAM together with hydrophobicity of the system resulted in much slower drug release compared to the hydrophilic ternary system of PCL/PEO/CAM. Cytotoxicity studies confirmed safety of the fiber mats to murine NIH 3T3 cells. Disc diffusion assay demonstrated that both fast and slow release fiber mats reached effective concentrations and had similar antibacterial activity. A biofilm formation assay revealed that both blank matrices are good substrates for the bacterial attachment and formation of biofilm. Importantly, prolonged release of CAM from drug-loaded fibers helps to avoid biofilm formation onto the dressing and hence avoids the treatment failure.


Assuntos
Antibacterianos/farmacologia , Fenômenos Fisiológicos Bacterianos/efeitos dos fármacos , Biofilmes/efeitos dos fármacos , Cloranfenicol/farmacologia , Infecção dos Ferimentos/tratamento farmacológico , Animais , Bandagens , Química Farmacêutica , Cloranfenicol/uso terapêutico , Preparações de Ação Retardada/farmacologia , Preparações de Ação Retardada/uso terapêutico , Portadores de Fármacos/química , Liberação Controlada de Fármacos , Modelos Químicos , Simulação de Dinâmica Molecular , Nanofibras/química , Nanotecnologia , Poliésteres/química , Infecção dos Ferimentos/microbiologia
18.
Drug Dev Ind Pharm ; 43(7): 1134-1142, 2017 Jul.
Artigo em Inglês | MEDLINE | ID: mdl-28277847

RESUMO

OBJECTIVE: Artesunate (ART) is proven to have potential anti-proliferative activities, but its instability and poor aqueous solubility limit its application as an anti-cancer drug. The present study was undertaken to develop coaxial electrospraying as a novel technique for fabricating nanoscale drug delivery systems of ART as the core-shell nanostructures. METHODS: The core-shell nanoparticles (NPs) were fabricated with coaxial electrospraying and the formation mechanisms of NPs were examined. The physical solid state and drug-polymer interactions of NPs were characterized by X-ray powder diffraction (XRPD) and Fourier transform infrared (FTIR) spectroscopy. The effects of materials and electrospraying process on the particle size and surface morphology of NPs were investigated by scanning electron microscopy (SEM). The drug release from NPs was determined in vitro by a dialysis method. RESULTS: The ART/poly(lactic-co-glycolic) acid (PLGA) chitosan (CS) NPs exhibited the mean particle size of 303 ± 93 nm and relatively high entrapment efficiency (80.5%). The release pattern showed an initial rapid release within two hours followed by very slow extended release. The release pattern approached the Korsmeyer-Peppas model. CONCLUSIONS: The present results suggest that the core-shell NPs containing PLGA and CS have a potential as carriers in the anticancer drug therapy of ART.


Assuntos
Antineoplásicos/administração & dosagem , Artemisininas/administração & dosagem , Quitosana/química , Sistemas de Liberação de Medicamentos/métodos , Nanopartículas/química , Ácido Poliglicólico/química , Antineoplásicos/química , Artemisininas/química , Artesunato , Liberação Controlada de Fármacos , Microscopia Eletrônica de Varredura , Tamanho da Partícula , Difração de Raios X
19.
Mol Pharm ; 14(3): 808-820, 2017 03 06.
Artigo em Inglês | MEDLINE | ID: mdl-28195483

RESUMO

Printing technology has been shown to enable flexible fabrication of solid dosage forms for personalized drug therapy. Several methods can be applied for tailoring the properties of the printed pharmaceuticals. In this study, the use of electrospun fibrous substrates in the fabrication of inkjet-printed dosage forms was investigated. A single-drug formulation with lidocaine hydrochloride (LH) and a combination drug system containing LH and piroxicam (PRX) for oromucosal administration were prepared. The LH was deposited on the electrospun and cross-linked gelatin substrates by inkjet printing, whereas PRX was incorporated within the substrate fibers during electrospinning. The solid state analysis of the electrospun substrates showed that PRX was in an amorphous state within the fibers. Furthermore, the results indicated the entrapment and solidification of the dissolved LH within the fibrous gelatin matrix. The printed drug amount (2-3 mg) was in good correlation with the theoretical dose calculated based on the printing parameters. However, a noticeable degradation of the printed LH was detected after a few months. An immediate release (over 85% drug release after 8 min) of both drugs from the printed dosage forms was observed. In conclusion, the prepared electrospun gelatin scaffolds were shown to be suitable substrates for inkjet printing of oromucosal formulations. The combination of electrospinning and inkjet printing allowed the preparation of a dual drug system.


Assuntos
Mucosa Bucal/metabolismo , Piroxicam/química , Administração Oral , Química Farmacêutica/métodos , Formas de Dosagem , Sistemas de Liberação de Medicamentos/métodos , Liberação Controlada de Fármacos , Gelatina/química , Lidocaína/química , Impressão/métodos , Propriedades de Superfície , Tecnologia Farmacêutica/métodos
20.
Eur J Pharm Sci ; 97: 237-246, 2017 Jan 15.
Artigo em Inglês | MEDLINE | ID: mdl-27890595

RESUMO

Amorphous solid dispersions (SDs) are a promising approach to improve the dissolution rate of and oral bioavailability of poorly water-soluble drugs. In some cases multi-phase, instead of single-phase, SD systems with amorphous drug are obtained. While it is widely assumed that one-phase amorphous systems are desirable, two-phase systems may still potentially exhibit enhanced stability and dissolution advantages over undispersed systems. The objective of the present study was to understand the solid-state properties of two-phase SDs with amorphous drug and their relation to physical stability. Two different types of excipients for SD formation were used, one being a polymer and the other a small molecule excipient. The supercooled molten SDs of a poorly water-soluble indomethacin (IND) with a graft copolymer, Soluplus® (SOL) and sugar alcohol, xylitol (XYL) were prepared. Supercooled molten SDs of IND with SOL were two-phase glassy suspension in which the amorphous drug was dispersed in an amorphous polymer matrix. A short-term aging of the SDs led to the formation of glassy suspensions where the crystalline drug was dispersed in an amorphous polymer matrix. These were physically stable at room temperature for the time period studied (RT, 23±2°C), but aging at high-humidity conditions (75% RH) recrystallization to metastable α-IND occurred. Interestingly, the SDs with XYL were two-phase amorphous precipitation systems in which the drug was in an amorphous form in the crystalline sugar alcohol matrix. The SDs of IND and XYL exhibited fast drug recrystallization. In conclusion, the preparation method of two-phase systems via co-melting in association with the rapid quench cooling is a feasible method for the formulation of poorly water-soluble drugs. The physical stability of these two-phase systems, however, is dependent on the carrier material and storage conditions.


Assuntos
Anti-Inflamatórios não Esteroides/química , Química Farmacêutica/métodos , Temperatura Baixa , Indometacina/química , Estabilidade de Medicamentos , Difração de Raios X
SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA
...