Erratum: Author Correction: Telemedicine-Rehabilitation and Virtual Reality in Orthopaedics and Sports Medicine.

[This corrects the article DOI: 10.1007/s43465-022-00766-6.].

Telemedicine-Rehabilitation and Virtual Reality in Orthopaedics and Sports Medicine.

Introduction: Tele-rehabilitation is a method of delivering rehabilitation services using information, technology and communication to everyone, irrespective of their geographic location. National zeal for competitive sports and COVID pandemic has led to an increase in its demand and popularity worldwide. The athletes need immediate treatment and correct rehabilitation to keep them in their game. This review aims to bring into perspective the importance of telemedicine and telerehabilitation in orthopaedics and sports medicine with a focus on virtual reality. Methods: Articles were searched based on suitable keywords 'telemedicine', 'telerehabilitation' 'orthopedics', 'orthopaedics', 'sports' and 'India*' which were combined using suitable boolean operators in PubMed, Scopus and Web of Science. Government guidelines and laws were also reviewed in view of telehealth and telemedicine. Conclusion: Tele-rehabilitation and virtual physical therapy are innovative and cost-effective ways to provide the best rehabilitative services to the patients at their doorstep. Virtual reality should be incorporated into the Indian telehealth delivering system with a special focus on the remote athlete population.

Measurement of Distance Between Femoral Insertion of Fibular Collateral Ligament and Popliteus: A Cadaveric Study in Indian Population.

Background: Injuries to posterolateral corner (PLC) of knee are often neglected. The three key components of PLC are lateral collateral ligament (LCL), popliteofibular ligament (PFL) and popliteus tendon (PT). For adequate reconstruction, anatomic location of these ligaments should be well understood. Material and methods: Twenty formalin fixed cadaveric knees were dissected. PT and LCL identified. Circumference of the two structures marked with pen just after cutting them close to bone surface. Distance between the centre of LCL and PT was measured along with the measurement of distal femoral medio-lateral dimension (MLD) and Anteroposterior dimension (ALD) of lateral condyle. Result: The mean distance between PT and LCL measured in 20 specimens was 8.3 ± 0.84 mm, with a range of 7 mm to 10 mm. MLD was 81.0 ± 3.6 mm and APD was 62.7 ± 3.2 mm. Conclusion: The distance in Indian population is significantly smaller compared to the western. This has clinical implication in drilling the tunnels for PLC reconstruction.

Correlation between height and semitendinosus tendon length, prediction of minimum semitendinosus tendon length based on height-an easy and accurate method.

Purpose: To find out an easy method to predict tendon length on the basis of patient height. Methods: A prospective study which included 256 patients. All patients underwent ligament reconstruction using semitendinosus graft. Pre-operatively age, gender, height and weight were noted. Harvested semitendinosus graft's length and diameter was measured. Results: Both the patient height as well as weight correlated with tendon diameter and tendon length (p-value < 0.05). A simple equation was also derived to pre-operatively predict tendon length. Conclusion: To predict graft size, surgeon should consider anthropometric variables. If we divide height of the patient with six, we get the approximate length of the tendon and by subtracting three from the obtained value we are more than 90% sure that ST would not be shorter than this. Level of evidence: level 4.

Clinico-Radio-Histopathological Correlation by C-Arm Image-Guided Biopsy in Spinal Tuberculosis.

BACKGROUND/PURPOSE OF THE STUDY: C-arm-guided biopsy is a safe and effective technique for evaluating TB spine and is useful in planning therapy. The purpose of this study was to find a correlation between clinically and radiologically suspected TB spine and C-arm image-guided biopsy-proven cases and to study the complications encountered. METHODS: After evaluating the clinical, laboratory, X-ray and MRI findings, 92 patients with provisionally diagnosed tubercular spine were subjected to C-arm image-guided biopsy. RESULTS: Among our 92 cases, histopathology was positive in 55 cases (59.78%). Out of these 55 histologically positive cases, CBNAAT was positive in 42 cases and negative in the rest 13 cases. Overall, among the 92 cases, CBNAAT was positive in 51(55.43%) of cases, and out of these, histopathology turned out to be positive in 42 of cases. Out of 41 cases with negative CBNAAT, histopathology was suggestive of tuberculosis in 13. The strength of agreement between CBNAAT and histopathology was statistically significant (p < 0.0001; kappa = 0.511). No complication such as bleeding, nerve/cord injury, infection, injury to aorta or pneumothorax was encountered during and after the C-arm biopsy in any case. CONCLUSION: C-arm image-guided biopsy is reasonably accurate and should be used as a tool for diagnosis of TB spine. We recommend histopathological examination as a key component for the diagnosis of TB spine, as it is precise and consumes relatively shorter time. CBNAAT is more rapid but is not a substitute for histopathology for spine TB diagnosis.

Innovative Use of Posterior Vertebral Wall Impactor in Tibial Plateau Depressed Fractures.

Depressed articular fractures of tibial plateau are treated by elevation of the fracture fragments to maintain the articular congruity and filling the void with any bone substitutes, followed by screw or plate fixation. This elevation of the fragments to maintain articular congruity poses a surgical challenge even in experienced hands. Many techniques have been described for the same, as the use of the metallic-bone-tamps, elevators and more recently inflatable-balloon-tamps. But due to the lesser cross-section area, these often led to comminution of the fragile articular bone fragments. The inflatable-balloon-tamp caused extrusion of contrast-dye or unintentional posterior-wall displacement. We treated a series of 25 patients with tibial plateau depressed fractures by a novel technique using posterior-vertebral-body-wall-impactor. This helped in a uniform dissipation of force over a large cross-sectional area under the fracture fragment, leading to minimal comminution of the depressed fragment, maintaining the articular congruency. Rest of the fixation was done in the standard manner. There were no intra-operative or post-operative complications. All patients had good knee function according to Rasmussen Knee Function Grading System and achieved radiological union of fracture at follow-up (with a range of 12-18 months). Hence, this technique may be a safer and effective alternative for the elevation of depressed articular fractures of tibia.

Comparison of semitendinosus tendon length and diameter in sports and non-sports group for ACL reconstruction.

Different anthropometric parameters such as weight, height, body mass index, thigh circumference, and thigh length have been extensively studied and their correlation assessed with hamstring graft length and diameter. This study is to analyse the difference of semitendinosus graft characteristics with sports activity of the patient. METHODS: 110 patients undergoing any ligament reconstruction with semitendinosus were included, 55 in sports and 55 in non-sports group. Height, weight, BMI, sports activity were noted pre-operatively. Semitendinosus harvested and graft length and diameter measured. RESULTS: 98 patients completed the study. The mean length of the harvested semitendinosus tendons was 28.45 ± 2.54 cm in non-sports group and 28.06 ± 4.18 cm in sports group. The mean diameter of semitendinosus was 6.29 ± 0.61 mm in non-sports group and 6.35 ± 0.6 mm in sports group. Positive correlation was found between height and graft length. No statistically significant difference between tendon length (p = 0.994) and diameter (p = 0.549) of sports and non-sports group was found. CONCLUSION: Patient height should be considered for preoperative prediction of tendon length and thickness without any difference in sports or non-sports group. A taller patient has a longer and thicker graft.

Fracture management during COVID-19 pandemic: A systematic review.

PURPOSE: The COVID-19 pandemic has affected orthopedic practices worldwide. Few studies focusing on epidemiology and management of fractures in COVID-19 patients have been published. We conducted a systematic review to evaluate the fracture types, presentation, treatment, complications, and early outcomes of fractures occurring amidst COVID-19 pandemic. METHODS: A systematic review of the all published papers was conducted with a comprehensive search of PubMed, Google Scholar, Scopus, and Cochrane Library database using keywords 'COVID-19', 'Coronavirus', 'trauma∗'and 'fracture' from January-April 2020. RESULTS: The searches yielded a total of ten studies with 112 Patients who were positive for COVID-19 associated with fractures was performed for six studies, reporting data separately for 44 patients with COVID 19 and an associated fracture. A diagnosis of COVID 19 was made on the basis of positive Computed Tomography scan in 39 patients and 30 patients had a positive Reverse Transcription-Polymerase Chain Reaction test. Overall, there were 29 proximal femoral fractures, 8 spine fractures, 7 fractures of the other bones. The fractures were treated surgically in 30 cases (68.18%) and the remaining 14 cases (31.82%) were managed conservatively. There were 16 patients (36.36%) who died, mostly due to respiratory failure with a median age of 82 years. CONCLUSION: COVID-19 has led to a significant reduction in a load of fracture patients globally, though the incidence of fragility fractures continues to be unaffected. There is a significantly higher risk of mortality in elderly patients with fractures and hence they should only be operated in a facility with a robust intensive care. Conservative treatment should be adopted as far as possible in non-obligatory fractures and in lesser equipped centers. Surgery in patients with proximal femur fragility fractures when judiciously selected did result in improvement in respiratory status. Reorganizing medical services is vital to deliver effective fracture care and also mitigate disease transmission.

Post COVID-19: Planning strategies to resume orthopaedic surgery -challenges and considerations.

The Coronavirus SARS-CoV-2 (COVID-19) pandemic has had a substantial effect on the health care systems around the world. As the disease has spread, many developed and developing countries have been stretched on their resources such as personnel as well as adequate equipment. As a result of resource disparity, in a populous country like India, the elective orthopaedic surgeries stand cancelled whilst trauma and emergency services have been reorganised following Indian Orthopaedic Association and recent urgent British Orthopaedic association guidelines. Though these guidelines provide strategies to deal with trauma and orthopaedic surgery management in the present scenario, once the COVID-19 pandemic stabilizes, restarting elective orthopaedic surgery and managing delayed trauma conditions in evolving health care systems is going to be a profound task. We look at the future challenges and considerations of re-establishing trauma and orthopaedic flow during the post-COVID-19 phase and suggest an algorithm to follow (Fig. 1).

Out Patient Department practices in orthopaedics amidst COVID-19: The evolving model.

Severe Acute Respiratory Syndrome COVID-19 was declared as a pandemic on 11th March 2020 by the World Health Organization and consequent lockdown imposed in several areas resulted in a marked reduction in orthopaedic practices. Although some guidelines for patient care in orthopaedic practice have been published, overall, publications focusing exclusively on guidelines on starting orthopaedic outpatient departments (OPD) after the COVID-19 lockdown amidst the on-going pandemic are lacking. We hereby propose the evolving knowledge in changes in OPD management practices for orthopaedic surgeons in the COVID- 19 era. The emphasis on online registration (e-registration) should be given impetus and become the new norm supplemented by telephonic and spot registration for the uneducated patients. The review highlights the safety of patient and orthopaedic surgeons in OPD by screening and maintaining hygiene at various levels. The article also mentions the duties of the help desk, OPD hall supervisor and the new norms of air conditioning, ventilation, safe use of elevators, sanitization of OPD premises and biomedical waste disposal. The optimum and safe utilization of human & material resources, DO's and DON'Ts for patients & health staff have also been proposed. The reorganization of plaster room, the precaution during plastering, fracture clinic, dressing and injection room services are discussed as per evolving guidelines. This article will also give deep insight into the OPD plan & telemedicine graphically. The authors suggest updating and downward permeation of existing e-infrastructure of government health services that is up-gradation of existing tertiary level online registration services, a paperless model of OPD consultation & dispensation. The future updating of Aarogya Setu App (https://mygov.in/aarogya-setu-app/) for convenient online OPD registration and dispensation has been discussed and proposed. This review will help in containing the spread of COVID 19 and build upon the health gains achieved after lockdown. The easy concept of CCCATTT has been introduced, and the OPD Plan has also been suggested. We have endeavoured to holistically detail an orthopaedic OPD setup and its upkeep in COVID-19 pandemic, but since the knowledge of COVID 19 is ever-evolving it needs replenishment by regular education for health staff.

3D printing and its applications in orthopaedic trauma: A technological marvel.

BACKGROUND: With rapid emergence of 3D printing technology, surgeons have recently started to apply this for nearly all areas of orthopaedic trauma surgery. Computed tomography or magnetic resonance images of trauma patients can be utilized for making graspable objects from 3D reconstructed images. Patient specific anatomical models can thereby be created. They enhance surgeon's knowledge of their patients' precise patho-anatomy, regarding both traumatized bones and soft tissue as well as normal areas, and therefore help in accurate preoperative planning. 3D printed patient specific instrumentation can help to achieve precise implant placement, and better surgical results. Most importantly, customized implants, casts, orthoses and prosthetics can be manufactured to match an individual's anatomy. Three dimensional (3D) printing, also called as 'additive manufacturing' and 'rapid prototyping' is considered as the "second industrial revolution", and this appears to be especially true for orthopaedic trauma surgery. METHODS: A literature search was performed for extracting all papers related to 3D Printing applications in orthopaedics and allied sciences on the Pubmed, and SCOPUS; using suitable key terms and Boolean operators ("3D Printing" OR "3 dimensional printing" OR "3D printed" OR "additive manufacturing" OR "rapid prototyping") AND (''Orthopaedics" OR "Orthopaedics'') AND ("Trauma" OR "Injury")in June 2018. Search was also performed in Web of Science, Cochrane Central Register of Controlled Trials and Cochrane Database of Systematic Reviews. No limits were set on the time period or evidence level, as 3D printing in orthopaedics is relatively recent and mainly low level evidence is available. Titles and abstracts were screened and all duplicate and unrelated papers were excluded. Papers related to orthopaedic trauma were manually selected for this review. RESULTS: The search on Pubmed retrieved 144 Papers and similar search on SCOPUS retrieved 94 papers. Additional searches did not reveal more relevant papers. After excluding duplicates and unrelated papers, and on screening of titles and abstracts, 59 papers were considered for review. Papers related to spine fractures only were not included, as they have been covered in another paper in this journal issue. CONCLUSION: All over the world, orthopaedic Surgeon's and allied professionals and scientists are enthusiastically using 3D printing technology for designing patient specific models, instrumentation, implants, orthosis and prosthesis, besides 3D bioprinting of bone and cartilage scaffolding, and the same has been applied for nearly all areas of orthopaedic trauma surgery, from head to foot.

Osteochondritis dissecans-Does platelet rich plasma really help.

Osteochondritis dissecans is a common disorder of knee and can be treated by various methods, depending on age of patient and stability of chondral fragment. In Osteochondritis dissecans ICRS type III lesion i.e. articular cartilage discontinuity but no dislocation, variable rate of union as well as high rate of non-union was observed in previous studies when treated with arthroscopic or open reduction and fixation. In previous study it has been also shown that platelet rich plasma help in fracture healing. In this study we are trying to extend the benefit of platelet rich plasma to Osteochondritis dissecans lesion. We took six patients with OCD, ICRS scale of OCD type III lesion. All Patients were operated Arthroscopiclly. Chondral flap of OCD lesion were fixed with stainless steel cannulated cancellous screw. To enhance union we used platelet rich plasma injections. .We access the union of chondral fragment to parent bone and knee function. Chondral fragment united to parent bone in all patients. To access knee function we used Tagner- Lysholm knee scoring system, in this study preoperatively score was 52.8 where as postoperatively it was 91.8. This study showed PRP is helpful in healing of chondral flap as all the chondral flap of osteochondral lesion united in this study.

Experience of supracondylar cheveron osteotomy for genu valgum in 115 adolescent knees.

PURPOSE: Medial close wedge Coventry type osteotomy is commonly performed procedure for adoloscent Genu valgum. However this osteotomy has some inherent problems, a wedge resection causes shortening of affected site. An additional plate for stabilization causes increase in soft tissue dissection and surgical time. A cheveron osteotomy is an alternative procedure, not requiring any internal fixation due to its inherent stability. We started this study with aim to analyze the results of Cheveron osteotomy, to see if the osteotomy was stable enough without implants, time required for healing of osteotomy, post-operative range of motion, limb length discrepancy and to evaluate any other complication. METHODS: This study was conducted to evaluate the efficacy of cheveron osteotomy in cases with genu valgum in our department from 2005 to 2012. 75 children with 115 knee deformities were included in the study. Patients were followed upto minimum 3 years post surgery. Clinical and radiological assessment was done on all subsequent visits. RESULTS: Preoperative mean valgus angle was 21° (12-30°) and mean inter malleolar distance was 12.3 cm(11-21 cm). The mean post-operative angle was 6.5° and mean intermalleolar distance was 5.6 cm. The difference was statistically significant. The mean tourniquet time was 26 min and mean surgical time including plaster cast application was 38 min. Mean blood loss was 75 ml. The mean time to union was 10.3 weeks. CONCLUSION: Supracondylar cheveron osteotomy is simple, stable, low cost osteotomy for surgical correction of genu valgum. The osteotomy provides excellent clinical, radiological and functional results in short surgical time and has an added advantage of omitting the need of second surgery.

Randomised comparison of pretensioning using cyclical loading and on tendon board for arthroscopic anterior cruciate ligament reconstruction using hamstring autograft.

OBJECTIVE: Pretensioning is usually done using two methods - manual cyclical loading and using tensioner with a tendon board. Both the methods are being used with little knowledge about the superiority of either method. This study was done with the objective of trying to find out the better method. METHODS: A total of 50 patients were selected for the above mentioned study who were randomised into each of the two groups using chit system - In group A patients, cyclical loading was done by twenty times full flexion -extension movements but in group B patients, the graft was placed on a tensioner with 15 pounds tension for 10 minutes. All patients were operated by the same surgeon. The patients were put on a strict rehabilitation protocol. Patients were allowed to bear weight as tolerated. Patients returned for follow up at 6 weeks, 3 months, 6 months and 12 months. At each visit patients were followed with Lysholm's Score and ROLIMETER reading. RESULTS: The ROLIMETER reading and Lysholm's score were seen to improve from preoperative to postoperative period and improved further over time with the progress of the rehabilitation protocol in both the groups. When compared to each other Group A i.e. patients pretensioned with cyclical loading had better Lysholm scores and ROLIMETER readings with the difference being statistically significant at all time periods except at 1 year when the difference between the ROLIMETER readings in the two groups were no more significant, though the difference of the Lysholms score was still found to be statistically significant. CONCLUSION: It was concluded in this study that cyclical loading is a better method of pretensioning in ACL reconstruction than tensioner on tendon board with 15 pounds of tension for 10 minutes.

Compound posterior cruciate ligament and popliteal artery injury due to dog bite: A case report.

Injuries due to dog bites are a common occurrence and are mostly trivial. Severe dog bite injuries requiring hospitalization and complex reconstructive procedures are more common in children. We present the case of a five year old child with popliteal artery thrombosis and compound Posterior Cruciate ligament injury due to a dog bite. The child was managed by immediate thrombectomy, meticulous debridement and knee spanning external fixation followed by Skin Grafting. At one year post surgery range of motion was 10-110°, with no distal neurovascular deficit and no sign of instability.