Synergistic lignin degradation between Phanerochaete chrysosporium and Fenton chemistry is mediated through iron cycling and ligninolytic enzyme induction.

Removal of recalcitrant lignin from wastewater remains a critical bottleneck in multiple aspects relating to microbial carbon cycling ranging from incomplete treatment of biosolids during wastewater treatment to limited conversion of biomass feedstock to biofuels. Based on previous studies showing that the white rot fungus Phanerochaete chrysosporium and Fenton chemistry synergistically degrade lignin, we sought to determine optimum levels of Fenton addition and the mechanisms underlying this synergy. We tested the extent of degradation of lignin under different ratios of Fenton reagents and found that relatively low levels of H2O2 and Fe(II) enhanced fungal lignin degradation, achieving 80.4 ± 1.61 % lignin degradation at 1.5 mM H2O2 and 0.3 mM Fe(II). Using a combination of whole-transcriptome sequencing and iron speciation assays, we determined that at these concentrations, Fenton chemistry induced the upregulation of 80 differentially expressed genes in P. ch including several oxidative enzymes. This study underlines the importance of non-canonical, auxiliary lignin-degrading pathways in the synergy between white rot fungi and Fenton chemistry in lignin degradation. We also found that, relative to the abiotic control, P. ch. increases the availability of Fe(II) for the production of hydroxyl radicals in the Fenton reaction by recycling Fe(III) (p < 0.001), decreasing the Fe(II) inputs necessary for lignin degradation via the Fenton reaction.

Understanding the Two-Dimensional Mixing Behavior of 1-Naphthalenethiol and Octanethiol.

A two-dimensional (2D) mixture in the form of a self-assembled monolayer composed of two distinct organothiol compounds was created by sequentially depositing 1-naphthalenethiol (1NT) and octanethiol (OT) on a gold surface. By varying the sequence of deposition, two mixed surface systems were created. The surface structure of the resulting mixed monolayer was characterized with Scanning Tunneling Microscopy (STM) and showed surface disorder across all investigated domains. Elemental analysis was carried out with X-ray Photoelectron Spectroscopy (XPS) and indicated that the 1NT monolayer was prone to significant oxidation. Reductive desorption (RD) was used to characterize the binding strength and electrochemical environments of the molecular components in the mixture, and confirmed disordered molecular layers. Due to the presence of oxidized species in the 1NT monolayer, 1NT was displaced by OT resulting in a novel surface structure composed of either OT or 1NT. Monolayers of OT that were exposed to a solution of 1NT resulted in disordered surface structures with a significant amount of gold vacancy islands. To date, there is no experimental phase diagram explaining the chemical behavior of two-dimensional mixtures. This study addresses the need for an experimental understanding of the phase behavior of mixed organothiol self-assembled monolayers (SAMs).

Microbial Diversity and Interaction Specificity in Kombucha Tea Fermentations.

Despite the popularity of kombucha tea, the distribution of different microbes across kombucha ferments and how those microbes interact within communities are not well characterized. Using metagenomics, comparative genomics, synthetic community experiments, and metabolomics, we determined the taxonomic, ecological, and functional diversity of 23 distinct kombuchas from across the United States. Shotgun metagenomic sequencing demonstrated that the bacterium Komagataeibacter rhaeticus and the yeast Brettanomyces bruxellensis were the most common microbes in the sampled kombucha communities. To determine the specificity of bacterium-yeast interactions, we experimentally quantified microbial interactions within kombucha biofilms by measuring densities of interacting species and biofilm production. In pairwise combinations of bacteria and yeast, B. bruxellensis and individual strains of Komagataeibacter spp. were sufficient to form kombucha fermentations with robust biofilms, but Zygosaccharomyces bisporus, another yeast found in kombucha, did not stimulate bacteria to produce biofilms. Profiling the spent media of both yeast species using nuclear magnetic resonance spectroscopy suggested that the enhanced ability of B. bruxellensis to ferment and produce key metabolites in sucrose-sweetened tea may explain why it stimulates biofilm formation. Comparative genomics demonstrated that Komagataeibacter spp. with >99% genomic similarity can still have dramatic differences in biofilm production, with strong producers yielding five times more biofilm than the weakest producers. IMPORTANCE Through an integration of metagenomic and experimental approaches, our work reveals the diversity and nature of interactions among key taxa in kombucha microbiomes through the construction of synthetic microbial pairs. Manipulation of these microbes in kombucha has the potential to shape both the fermentation qualities of kombucha and the production of biofilms and is valuable for kombucha beverage producers, biofilm engineers, and synthetic ecologists.

The diversity and function of sourdough starter microbiomes.

Humans have relied on sourdough starter microbial communities to make leavened bread for thousands of years, but only a small fraction of global sourdough biodiversity has been characterized. Working with a community-scientist network of bread bakers, we determined the microbial diversity of 500 sourdough starters from four continents. In sharp contrast with widespread assumptions, we found little evidence for biogeographic patterns in starter communities. Strong co-occurrence patterns observed in situ and recreated in vitro demonstrate that microbial interactions shape sourdough community structure. Variation in dough rise rates and aromas were largely explained by acetic acid bacteria, a mostly overlooked group of sourdough microbes. Our study reveals the extent of microbial diversity in an ancient fermented food across diverse cultural and geographic backgrounds.

Sourdough bread is an ancient fermented food that has sustained humans around the world for thousands of years. It is made from a sourdough 'starter culture' which is maintained, portioned, and shared among bread bakers around the world. The starter culture contains a community of microbes made up of yeasts and bacteria, which ferment the carbohydrates in flour and produce the carbon dioxide gas that makes the bread dough rise before baking. The different acids and enzymes produced by the microbial culture affect the bread's flavor, texture and shelf life. However, for such a dependable staple, sourdough bread cultures and the mixture of microbes they contain have scarcely been characterized. Previous studies have looked at the composition of starter cultures from regions within Europe. But there has never been a comprehensive study of how the microbial diversity of sourdough starters varies across and between continents. To investigate this, Landis, Oliverio et al. used genetic sequencing to characterize the microbial communities of sourdough starters from the homes of 500 bread bakers in North America, Europe and Australasia. Bread makers often think their bread's unique qualities are due to the local environment of where the sourdough starter was made. However, Landis, Oliverio et al. found that geographical location did not correlate with the diversity of the starter cultures studied. The data revealed that a group of microbes called acetic acid bacteria, which had been overlooked in past research, were relatively common in starter cultures. Moreover, starters with a greater abundance of this group of bacteria produced bread with a strong vinegar aroma and caused dough to rise at a slower rate. This research demonstrates which species of bacteria and yeast are most commonly found in sourdough starters, and suggests geographical location has little influence on the microbial diversity of these cultures. Instead, the diversity of microbes likely depends more on how the starter culture was made and how it is maintained over time.

Review of Sunset OC/EC Instrument Measurements During the EPA's Sunset Carbon Evaluation Project.

To evaluate the feasibility of the Sunset semicontinuous organic and elemental carbon (OC/EC) monitor, the U.S. Environmental Protection Agency (EPA) sponsored the deployment of this monitor at Chemical Speciation Network (CSN) sites with OC and EC measurements via quartz fiber filter collection in Chicago, Illinois; Houston, Texas; Las Vegas, Nevada; St. Louis, Missouri; Rubidoux, California; and Washington, D.C. Houston, St. Louis, and Washington also had collocated Aethalometer black carbon (BC) measurements. Sunset OC generally compared well with the CSN OC (r2 = 0.73 across five sites); the Sunset/CSN OC ratio was, on average, 1.06, with a range among sites of 0.96 to 1.12. Sunset thermal EC and CSN EC did not compare as well, with an overall r2 of 0.22, in part because 26% of the hourly Sunset EC measurements were below the detection limit. Sunset optical EC had a much better correlation to CSN EC (r2 = 0.67 across all sites), with an average Sunset/CSN ratio of 0.90 (range of 0.7 to 1.08). There was also a high correlation of Sunset optical EC with Aethalometer BC (r2 = 0.77 across all sites), though with a larger bias (average Sunset/Aethalometer ratio of 0.56). When the Sunset instrument was working well, OC and OptEC data were comparable to CSN OC and EC.

Delayed Encounter of Parental Genomes Can Lead to Aneuploidy in Saccharomyces cerevisiae.

We have investigated an extreme deviation from the norm of genome unification that occurs during mating in the yeast, Saccharomyces cerevisiae This deviation is encountered when yeast that carry a mutation of the spindle pole body protein, Kar1, are mated with wildtype cells. In this case, nuclear fusion is delayed and the genotypes of a fraction of zygotic progeny suggest that chromosomes have "transferred" between the parental nuclei in zygotes. This classic, yet bizarre, occurrence is routinely used to generate aneuploid (disomic) yeast. [kar1 × wt] zygotes, like [wt × wt] zygotes, initially have a single spindle pole body per nucleus. Unlike [wt × wt] zygotes, in [kar1 × wt] zygotes, the number of spindle pole bodies per nucleus then can increase before nuclear fusion. When such nuclei fuse, the spindle pole bodies do not coalesce efficiently, and subsets of spindle pole bodies and centromeres can enter buds. The genotypes of corresponding biparental progeny show evidence of extensive haplotype-biased chromosome loss, and can also include heterotypic chromosomal markers. They thus allow rationalization of chromosome "transfer" as being due to an unanticipated yet plausible mechanism. Perturbation of the unification of genomes likely contributes to infertility in other organisms.

Fungi exposed to chronic nitrogen enrichment are less able to decay leaf litter.

Saprotrophic fungi are the primary decomposers of plant litter in temperate forests, and their activity is critical for carbon (C) and nitrogen (N) cycling. Simulated atmospheric N deposition is associated with reduced fungal biomass, shifts in fungal community structure, slowed litter decay, and soil C accumulation. Although rarely studied, N deposition may also result in novel selective pressures on fungi, affecting evolutionary trajectories. To directly test if long-term N enrichment reshapes fungal responses to N, we isolated decomposer fungi from a long-term (28 yr) N-addition experiment and used a common garden approach to compare growth rates and decay abilities of isolates from control and N-amended plots. Both growth and decay were significantly altered by long-term exposure to N enrichment. Changes in growth rates were idiosyncratic, as different species grew either more quickly or more slowly after exposure to N, but litter decay by N isolates was consistent and generally lower compared to control isolates of the same species, a response not readily reversed when N isolates were grown in control (low N) environments. Changes in fungal responses accompany and perhaps drive previously observed N-induced shifts in fungal diversity, community composition, and litter decay dynamics.

Electrochemical Attachment of Diazonium-Generated Films on Nanoporous Gold.

Nanoporous gold provides a high surface area platform for further chemistry, but the stability of the molecular linkages to the surface will limit applications. We attached aryl molecular layers to nanoporous gold electrodes through electrochemical reduction of the corresponding aryl-diazonium salt and studied the properties and stability of the resulting films in varied attachment conditions. Infrared reflection absorption spectroscopy and X-ray photoelectron spectroscopy were used to confirm the presence of the molecular layers. X-ray photoelectron spectroscopy indicates that the molecular layer is thick and that attachment conditions can form multilayers. However, cyclic voltammetry shows that the multilayers do not block electrochemical activity at the nanoporous gold surface. The molecular layers are resistant to replacement by alkane-thiol chains and exhibit some stability with respect to applied potential. These results indicate that a thick but highly defective molecular film forms with a mixture of strongly and weakly bound molecules.

The preclinical efficacy, selectivity and pharmacologic profile of MK-5932, an insulin-sparing selective glucocorticoid receptor modulator.

Glucocorticoids are used widely in the treatment of inflammatory diseases, but use is accompanied by a significant burden of adverse effects. It has been hypothesized that gene- and cell-specific regulation of the glucocorticoid receptor by small molecule ligands could be translated into a therapeutic with an improved risk-benefit profile. MK-5932 is a highly selective glucocorticoid receptor modulator that is anti-inflammatory in vivo with an improved profile on glucose metabolism: Bungard et al. (2011). Bioorg. Med. Chem. 19, 7374-7386. Here we describe the full biological profile of MK-5932. Cytokine production following lipopolysaccharide (LPS) challenge was blocked by MK-5932 in both rat and human whole blood. Oral administration reduced inflammatory cytokine levels in the serum of rats challenged with LPS. MK-5932 was anti-inflammatory in a rat contact dermatitis model, but was differentiated from 6-methylprednisolone by a lack of elevation of fasting insulin or glucose levels after 7 days of dosing, even at high exposure levels. In fact, animals in the vehicle group were consistently hyperglycemic at the end of the study, and MK-5932 normalized glucose levels in a dose-dependent manner. MK-5932 was also anti-inflammatory in the rat collagen-induced arthritis and adjuvant-induced arthritis models. In healthy dogs, oral administration of MK-5932 exerted acute pharmacodynamic effects with potency comparable to prednisone, but with important differences on neutrophil counts, again suggestive of a dissociated profile. Important gaps in our understanding of mechanism of action remain, but MK-5932 will be a useful tool in dissecting the mechanisms of glucose dysregulation by therapeutic glucocortiocids.

Norrish Type I surface photochemistry for butyrophenone on TiO2(110).

The photofragmentation of butyrophenone yields benzoate and a propyl radical on oxidized TiO2(110). Oxygen dissociates in native oxygen vacancies to produce reactive oxygen adatoms which react with butyrophenone to create photoactive butyrophenone-O complexes that are sensitive to hole oxidation created upon UV illumination. The same O adatoms also trap one of the primary photoproducts, phenyl-CO, to produce benzoate. The reaction proceeds via a Norrish Type I like process involving α-CC cleavage on the surface, in contrast to the gas phase where a Norrish Type II pathway predominates. The mechanism is probed using mass spectrometry and, for the first time, scanning tunneling microscopy (STM). Our STM experiments show that there is a 1-to-1 correspondence between the immobile butyrophenone-O complex and formation of a benzoate on the surface. We also demonstrate that the benzoate species is in close proximity to the original butyrophenone complex, indicating that benzoate is produced on a time scale more rapid than diffusion of the photoproducts. While the photoproducts of butyrophenone decomposition are similar to ketone oxidation reported previously, butyrophenone reacts via a different starting ground state, based on STM and density functional theory studies. Specifically, butyrophenone does not produce a dioxyalkylene species, which has been proposed to be the photoactive state for other ketones. Based on a combination of STM experiments and density functional theory, we propose that a peroxy-like configuration where the oxygen adatom stabilizes the butyrophenone through its carbonyl oxygen is the surface intermediate that photodecomposes. These results demonstrate the importance of the excited state in determining the photochemistry of ketones on surfaces.

Highly stable redox-active molecular layers by covalent grafting to conductive diamond.

We demonstrate a modular "click"-based functionalization scheme that allows inexpensive conductive diamond samples to serve as an ultrastable platform for surface-tethered electrochemically active molecules stable out to ∼1.3 V vs Ag/AgCl. We have cycled surface-tethered Ru(tpy)(2) to this potential more than 1 million times with little or no degradation in propylene carbonate and only slightly reduced stability in water and acetonitrile.

Surface chemistry for stable and smart molecular and biomolecular interfaces via photochemical grafting of alkenes.

Many emerging fields such as biotechnology and renewable energy require functionalized surfaces that are "smart" and highly stable. Surface modification schemes developed previously have often been limited to simple molecules or have been based on weakly bound layers that have limited stability. In this Account, we report on recent developments enabling the preparation of molecular and biomolecular interfaces that exhibit high selectivity and unprecedented stability on a range of covalent materials including diamond, vertically aligned carbon nanofibers, silicon, and metal oxides. One particularly successful pathway to ultrastable interfaces involves the photochemical grafting of organic alkenes to the surfaces. Bifunctional alkenes with a suitable functional group at the distal end can directly impart functionality and can serve as attachment points for linking complex structures such as DNA and proteins. The successful application of photochemical grafting to a surprisingly wide range of materials has motivated researchers to better understand the underlying photochemical reaction mechanisms. The resulting studies using experimental and computational methods have provided fundamental insights into the electronic structure of the molecules and the surface control photochemical reactivity. Such investigations have revealed the important role of a previously unrecognized process, photoelectron emission, in initiating photochemical grafting of alkenes to surfaces. Molecular and biomolecular interfaces formed on diamond and other covalent materials are leading to novel types of molecular electronic interfaces. For example, electrical, optical, or electromechanical structures that convert biological information directly into analytical signals allow for direct label-free detection of DNA and proteins. Because of the preferential adherence of molecules to graphitic edge-plane sites, the grafting of redox-active species to vertically aligned carbon nanofibers leads to good electrochemical activity. Therefore researchers could graft electrocatalytic materials to carbon nanofibers to develop new types of selective electrocatalytic interfaces. Extending this chemistry to include metal oxides such as TiO(2) may lead to highly specific and efficient chemical reactions and new materials with useful applications in photovoltaic and photocatalytic energy conversion.

Highly stable molecular layers on nanocrystalline anatase TiO2 through photochemical grafting.

Well-defined molecular layers can be formed on the surface of nanocrystalline anatase TiO2 by photochemically grafting organic molecules bearing a terminal vinyl group. The molecular layers produced are shown to have minimal oxidation and are able to be patterned and uniformly grafted through optically thick nanocrystalline films. Stability tests show that the layers have excellent stability in deionized water at 80 degrees C, aqueous solutions at pH=1.0 and pH=10.3 at 65 degrees C, and acetonitrile for time scales approaching 1200 h. Degradation of the films in deionized water occurs using a AM1.5 full-spectrum solar simulator as an illumination source but is partially suppressed by filtering with a 400 nm UV blocking filter which blocks the above-bandgap light. A mechanism is proposed for the grafting reaction in which the surface hydroxyl groups trap photoexcited holes, facilitating reaction with the vinyl group.

Photochemical grafting and patterning of biomolecular layers onto TiO2 thin films.

TiO2 thin films are highly stable and can be deposited onto a wide variety of substrate materials under moderate conditions. We demonstrate that organic alkenes will graft to the surface of TiO2 when illuminated with UV light at 254 nm and that the resulting layers provide a starting point for the preparation of DNA-modified TiO2 thin films exhibiting excellent stability and biomolecular selectivity. By using alkenes with a protected amino group at the distal end, the grafted layers can be deprotected to yield molecular layers with exposed primary amino groups that can then be used to covalently link DNA oligonucleotides to the TiO2 surface. We demonstrate that the resulting DNA-modified surfaces exhibit excellent selectivity toward complementary versus noncomplementary target sequences in solution and that the surfaces can withstand 25 cycles of hybridization and denaturation in 8.3 M urea with little or no degradation. Furthermore, the use of simple masking methods provides a way to directly control the spatial location of the grafted layers, thereby providing a way to photopattern the spatial distribution of biologically active molecules to the TiO2 surfaces. Using Ti films ranging from 10 to 100 nm in thickness allows the preparation of TiO2 films that range from highly reflective to almost completely transparent; in both cases, the photochemical grafting of alkenes can be used as a starting point for stable surfaces with good biomolecular recognition properties.

Cyclopropylamino acid amide as a pharmacophoric replacement for 2,3-diaminopyridine. Application to the design of novel bradykinin B1 receptor antagonists.

Antagonism of the bradykinin B1 receptor represents a potential treatment for chronic pain and inflammation. Novel antagonists were designed that display low-nanomolar affinity for the human bradykinin B1 receptor and good bioavailability in the rat.

The role of biopharmaceutics in the development of a clinical nanoparticle formulation of MK-0869: a Beagle dog model predicts improved bioavailability and diminished food effect on absorption in human.

MK-0869 (aprepitant), a potent substance P antagonist, is the active ingredient of EMEND which has recently been approved by the FDA for the prevention of chemotherapy-induced nausea and vomiting. Early clinical tablet formulations of MK-0869 showed significant food effects on absorption, suggesting that formulation could have a significant role in improving bioavailability. A Beagle dog model was developed in an effort to guide novel formulation development. Using the suspension of the micronized bulk drug used for the tablet formulations, the food effect on absorption was confirmed in the dog at a similar magnitude to that observed in humans. Further dog studies demonstrated a clear correlation between particle size and in vivo exposures, with the nanoparticle (NanoCrystal) colloidal dispersion formulation providing the highest exposure, suggesting dissolution-limited absorption. The NanoCrystal dispersion also eliminated the food effect on oral absorption in the dog at a dose of 2mg/kg. Regional absorption studies using triport dogs indicated that the absorption of MK-0869 was limited to the upper gastrointestinal tract. These results provided strong evidence that the large increase in surface areas of the drug nanoparticles could overcome the narrow absorption window and lead to rapid in vivo dissolution, fast absorption, and increased bioavailability. In addition, the dog model was used for optimizing formulation processes in which the nanoparticles were incorporated into solid dosage forms, and for selecting excipients to effectively re-disperse the nanoparticles from the dosage units. The human pharmacokinetic data using the nanoparticle formulation showed excellent correlations with those generated in the dog.