RESUMO
OBJECTIVES: Upon initial proximal wall construction, the favorable C-factor of class-II cavities may become unfavorable. This study investigated the application method on bulk-fill resin composite polymerization shrinkage. METHODS: Occluso-proximal class-II cavities were prepared in 40 molars and bonded with a self-etch adhesive (Adhese Universal). The study groups varied according to the resin composite application: group-1: bulk application, Tetric EvoCeram Bulk Fill (TBF); group-2: proximal wall construction (TBF) and occlusal cavity filling (TBF); group-3: thin flowable liner layer, Tetric EvoFlow Bulk Fill (TEF) and bulk filling (TBF); group-4: flowable liner (TEF), proximal wall (TBF), occlusal cavity (TBF); and group-5: bulk application, SDR (3 mm) and capping layer (TBF, 1 mm). Each resin composite increment was scanned twice using micro-CT (uncured, cured 40 s) at a resolution of 16 µm. Shrinkage vectors and volumetric polymerization shrinkage were evaluated and statistically analyzed (one-way ANOVA). SEM images were used to investigate the tooth-restoration interface. RESULTS: Shrinkage vectors differed significantly among the groups and were greatest in gp5-fl/SDR (47.6 µm), followed by gp1-TBF (23.8 µm) and least in gp5-fl/SDR+TBF (11.1 µm). Volumetric shrinkage varied significantly with the use of SDR (gp5-fl/SDR: 2.6%) and TEF (gp4-fl/TEF: 2.5%) to TBF (gp4-fl/TEF+wl/TBF: 0.6%) in the incremental application. SIGNIFICANCE: Building a proximal resin composite wall yielded smaller shrinkage vectors than the bulk application. Applying a thin flowable liner decreased the shrinkage vectors, even more when building a proximal wall. A thin flowable liner is recommended when building a proximal resin composite wall.
