Effects of temperature and dissolved oxygen on sludge properties and their role in bioflocculation and settling.

Effects of temperature (mesophilic (35 °C) vs. thermophilic (55 °C)) and dissolved oxygen (DO) concentration (under thermophilic conditions) on sludge properties and their role in bioflocculation and settling were studied using well-controlled sequencing batch reactors fed with a synthetic wastewater comprised of glucose and inorganic nutrients. Under a similar DO level, thermophilic sludge had a poorer bioflocculating ability and settleability than that of mesophilic sludge. Under a thermophilic condition, an increase in DO level led to a poorer settleability and a slightly improved bioflocculating ability. A poorer settleability was related to a higher level of filaments. Analysis of bound extracellular polymeric substances (EPS) indicates that thermophilic sludge had a higher level of total bound EPS content than that of mesophilic sludge under a similar DO level, and an increase in DO resulted in an increase in total bound EPS content in thermophilic sludge. Surface analysis of sludge by X-ray photoelectron spectroscopy (XPS) suggests that significant differences in the surface concentrations of elements N, C, O were observed between thermophilic and mesophilic sludge, implying significant differences in bound EPS composition. The results of gel permeation chromatography indicate that the weight-averaged molecular weight (M(w)) of bound EPS covered a range of 1159 Da to 13220 Da. The distribution of EPS "species" at floc surfaces was shown by transmission electron microscopy (TEM) to be uneven; different kinds of nanoscale materials were distributed in a patchy manner at the floc-water interface. The results suggest that it is the role of specific EPS molecules rather than the quantity of bound EPS that determine the difference in bioflocculation behavior between thermophilic and mesophilic sludge. The strategy of increasing the DO level could not solve the biomass separation problems associated with thermophilic sludge.

Treatment of thermomechanical pulping condensate using thermophilic and mesophilic sequencing batch reactors.

In-mill thermophilic treatment of individual wastewater streams to achieve water system closure has received much attention in pulp and paper mills. Aerobic biological treatment of thermomechanical pulping (TMP) condensate was conducted using thermophilic (55 °C) and mesophilic (35 °C) sequencing batch reactors (SBRs) for a period of 143 days at a cyclic time of 6, 8 and 12 h. A soluble chemical oxygen demand (SCOD) removal efficiency of 77 to 91% was achieved, given an organic loading rate of 0.7-1.3 kg/m³ d. The COD removal efficiency of the thermophilic SBR was slightly lower than that of the mesophilic SBR. Majority of the soluble COD was removed by biodegradation with a small portion (9-13%) of soluble COD stripped by aeration. The settleability (sludge volume index) and the flocculating ability (effluent suspended solids) of thermophilic sludge were comparable to or slightly poorer than that of the mesophilic sludge. The level of filaments in thermophilic sludge was usually higher than that in mesophilic sludge. The results of the study indicate that both thermophilic and mesophilic SBRs can be successfully operated for in-mill treatment of TMP condensate. The treated effluent has the potential for subsequent reuse in the mill.