Effect of the age of garments used under real-life conditions on microfibre release from polyester and cotton clothing.

The release of microfibres from fabrics during laundering represents an important source of plastic and natural microfibres to aquatic environments. Garment age - how long the garment has been used - could be a key factor influencing the rate of release, yet most studies of microfibre shedding have only assessed newly manufactured products. To this end, we quantified microfibre release during laundering in domestic washing machines from polyester (PES) and cotton garments (n = 38) used in real-life conditions for periods between 1 and 31 years with different use intensities. In addition, to better understand the factors involved in microfibre releases, fibre composition (different PES percentages) and type of garments (T-shirts, polo shirts, uniforms, sports shirts, and sweatshirts) were examined. All garments released microfibres during washing, while the older garments presented higher releases for clothing with a PES/cotton blend. In general, older garments (15-31 years) released nearly twice as many fibres when washed than newer garments (1-10 years). The mass of microfibres released was consistently greater in garments with a higher proportion of cotton than PES (up to 1.774 mg g-1 in 2% PES and 0.366 mg g-1 in 100% PES fabrics), suggesting that cotton might be released more readily such that the relative proportion of PES in the garments could increase over time. Additionally, SEM images showed fibre damage, with fibres from the older garments exhibiting more peeling and splitting. While it is important to note that the overall environmental footprint is undoubtedly reduced by keeping garments in use for longer periods of time, older garments were shown to release more microfibres.

Revealing microplastic dynamics: the impact of precipitation and depth in urban river ecosystems.

Research on microplastics in Latin America is limited compared to a global perspective. Brazil plays a significant role in this context, as it possesses 12% of the world's freshwater reserves, constituting 53% of South America's water resources. There has been growing concern regarding the plastic pollution of the country's freshwater systems in recent years. Therefore, this study investigated the impact of plastic pollution on the Guaíba River, a significant watercourse in the southern region of Brazil that is subjected to high anthropogenic pressure. Additionally, we examined correlations between the presence of microplastics and key factors influencing their distribution in the river. Thus, freshwater was collected in seven sampling campaigns from 2019 to 2020, totaling 66 samples. The microplastics were quantified and characterized according to their color, shape, and polymeric composition. The concentration of microplastics varied between 2.9 and 53.8 items m-3, and the distribution and transport were positively influenced by the population density, precipitations, and depth of each sampling point. White-transparent color category (51%) and fragment shape (89%) were predominant among the found particles. Polyethylene (PE) and polypropylene (PP) represented 37% and 57% of the analyzed particles. The non-metric multidimensional scaling (nMDS) analysis indicated that similar contamination sources, such as domestic sewage, could influence three out of ten sampled points. Several microplastics presented the formation of cracks, with sizes smaller than 10 µm on their surface, which might indicate an erosion process, resulting in the formation of nanoplastics. The color fading observed in microplastics suggests that the particles were subjected to environmental stressors, leading to the leaching or degradation of the dye on the plastic. The results confirmed the ubiquity of microplastics in Guaíba River, highlighting the importance of improving the regulations on plastic waste disposal in the country to prevent the contamination of freshwater bodies.

First evidence of microplastic contamination in the freshwater of Lake Guaíba, Porto Alegre, Brazil.

The ubiquitous presence of microplastics in the aquatic environment has raised concern about their potential impacts on and risks to the biota. While the presence of microplastics in a marine environment has been well studied, the impact of microplastic contamination in freshwater bodies is understudied. In the present study, baseline data about contamination with microplastics in Lake Guaíba in southern Brazil are presented. The abundance, distribution, and composition of microplastics in the surface of this freshwater body were investigated, and these parameters were correlated with population density, land occupation, wind, and geohydrologic processes. The samples were collected with a manta net (60 µm mesh size). Microplastics were found in all the samples, with an average of 11.9 ± 0.6 to 61.2 ± 6.1 items m-3, which indicates the widespread contamination of the lake with plastic particles. The most frequent microplastic morphology was the fragment type in the size range of 100 to 250 µm, and the predominant colours were white/transparent and red. Measurement uncertainty of the visual microplastic counts showed that black colour microplastics is more susceptible to be mistaken, which might lead to an underestimation and/or overestimation of the total number of microplastics. Polypropylene and polyethylene together comprised most of the polymer types (98%). Micro-Fourier transform infrared (micro-FTIR) spectroscopy analyses showed that 58% of the analysed polymers were highly oxidised, indicating long residence of this particles in the water. In addition, our data show that the distribution of microplastics is strongly influenced by the geohydrological characteristics of the lake. Therefore, this research may provide information for further investigations of microplastic distribution in Lake Guaíba and can serve as a base to improve the regulations regarding waste management to effectively reduce microplastic pollution in freshwater systems. Additionally, the measurement uncertainty showed that black microplastics are more susceptible to variations in their measurements.