A multi-analysis approach for estimating regional health impacts from the 2017 Northern California wildfires.

Smoke impacts from large wildfires are mounting, and the projection is for more such events in the future as the one experienced October 2017 in Northern California, and subsequently in 2018 and 2020. Further, the evidence is growing about the health impacts from these events which are also difficult to simulate. Therefore, we simulated air quality conditions using a suite of remotely-sensed data, surface observational data, chemical transport modeling with WRF-CMAQ, one data fusion, and three machine learning methods to arrive at datasets useful to air quality and health impact analyses. To demonstrate these analyses, we estimated the health impacts from smoke impacts during wildfires in October 8-20, 2017, in Northern California, when over 7 million people were exposed to Unhealthy to Very Unhealthy air quality conditions. We investigated using the 5-min available GOES-16 fire detection data to simulate timing of fire activity to allocate emissions hourly for the WRF-CMAQ system. Interestingly, this approach did not necessarily improve overall results, however it was key to simulating the initial 12-hr explosive fire activity and smoke impacts. To improve these results, we applied one data fusion and three machine learning algorithms. We also had a unique opportunity to evaluate results with temporary monitors deployed specifically for wildfires, and performance was markedly different. For example, at the permanent monitoring locations, the WRF-CMAQ simulations had a Pearson correlation of 0.65, and the data fusion approach improved this (Pearson correlation = 0.95), while at the temporary monitor locations across all cases, the best Pearson correlation was 0.5. Overall, WRF-CMAQ simulations were biased high and the geostatistical methods were biased low. Finally, we applied the optimized PM2.5 exposure estimate in an exposure-response function. Estimated mortality attributable to PM2.5 exposure during the smoke episode was 83 (95% CI: 0, 196) with 47% attributable to wildland fire smoke.Implications: Large wildfires in the United States and in particular California are becoming increasingly common. Associated with these large wildfires are air quality and health impact to millions of people from the smoke. We simulated air quality conditions using a suite of remotely-sensed data, surface observational data, chemical transport modeling, one data fusion, and three machine learning methods to arrive at datasets useful to air quality and health impact analyses from the October 2017 Northern California wildfires. Temporary monitors deployed for the wildfires provided an important model evaluation dataset. Total estimated regional mortality attributable to PM2.5 exposure during the smoke episode was 83 (95% confidence interval: 0, 196) with 47% of these deaths attributable to the wildland fire smoke. This illustrates the profound effect that even a 12-day exposure to wildland fire smoke can have on human health.

The Comprehensive Fire Information Reconciled Emissions (CFIRE) inventory: Wildland fire emissions developed for the 2011 and 2014 U.S. National Emissions Inventory.

Wildland fire emissions from both wildfires and prescribed fires represent a major component of overall U.S. emissions. Obtaining an accurate, time-resolved inventory of these emissions is important for many purposes, including to account for emissions of greenhouse gases and short-lived climate forcers, as well as to model air quality for health, regulatory, and planning purposes. For the U.S. Environmental Protection Agency's 2011 and 2014 National Emissions Inventories, a new methodology was developed to reconcile the wide range of available fire information sources into a single coherent inventory. The Comprehensive Fire Information Reconciled Emissions (CFIRE) inventory effort utilized satellite fire detections as well as a large number of national, state, tribal, and local databases. The methodology and results for CONUS and Alaska were documented and compared against other fire emissions databases, and the efficacy of the overall effort was evaluated. Results show the overall spatial pattern differences and relative seasonality of wildfires and prescribed fires across the country. Prescribed burn emissions occurred primarily in non-summer months were concentrated in the Southeast, Northwest, and lower Midwest, and were relatively consistent year to year. Wildfire emissions were much more variable but occurred primarily in the summer and fall. Overall, CFIRE represents a third of total emitted PM2.5 across all sources in the National Emissions Inventory, with prescribed fires accounting for nearly half of all CFIRE emissions. Compared with other wildland fire emissions inventories derived solely from satellite detections, the CFIRE inventory shows markedly increased emissions, reflecting the importance of the multiple national and regional databases included in CFIRE in capturing small fires and prescribed fires in particular. Implications: Wildland fire emissions inventories need to incorporate multiple sources of fire information in order to better represent the full range of fire activity, including prescribed burns and smaller fires. For the 2011 and 2014 U.S. National Emissions Inventory, a methodology was developed to collect, associate, and reconcile fire information from satellite data as well as a large number of national, regional, state, local, and tribal fire information databases across the country. The resulting emissions inventory shows the importance of this type of integration and reconciliation when compared against other emissions inventories for the same period.

Wildfire and prescribed burning impacts on air quality in the United States.

Air quality impacts from wildfires have been dramatic in recent years, with millions of people exposed to elevated and sometimes hazardous fine particulate matter (PM 2.5 ) concentrations for extended periods. Fires emit particulate matter (PM) and gaseous compounds that can negatively impact human health and reduce visibility. While the overall trend in U.S. air quality has been improving for decades, largely due to implementation of the Clean Air Act, seasonal wildfires threaten to undo this in some regions of the United States. Our understanding of the health effects of smoke is growing with regard to respiratory and cardiovascular consequences and mortality. The costs of these health outcomes can exceed the billions already spent on wildfire suppression. In this critical review, we examine each of the processes that influence wildland fires and the effects of fires, including the natural role of wildland fire, forest management, ignitions, emissions, transport, chemistry, and human health impacts. We highlight key data gaps and examine the complexity and scope and scale of fire occurrence, estimated emissions, and resulting effects on regional air quality across the United States. The goal is to clarify which areas are well understood and which need more study. We conclude with a set of recommendations for future research. IMPLICATIONS: In the recent decade the area of wildfires in the United States has increased dramatically and the resulting smoke has exposed millions of people to unhealthy air quality. In this critical review we examine the key factors and impacts from fires including natural role of wildland fire, forest management, ignitions, emissions, transport, chemistry and human health.

Methods, availability, and applications of PM2.5 exposure estimates derived from ground measurements, satellite, and atmospheric models.

Fine particulate matter (PM2.5) is a well-established risk factor for public health. To support both health risk assessment and epidemiological studies, data are needed on spatial and temporal patterns of PM2.5 exposures. This review article surveys publicly available exposure datasets for surface PM2.5 mass concentrations over the contiguous U.S., summarizes their applications and limitations, and provides suggestions on future research needs. The complex landscape of satellite instruments, model capabilities, monitor networks, and data synthesis methods offers opportunities for research development, but would benefit from guidance for new users. Guidance is provided to access publicly available PM2.5 datasets, to explain and compare different approaches for dataset generation, and to identify sources of uncertainties associated with various types of datasets. Three main sources used to create PM2.5 exposure data are ground-based measurements (especially regulatory monitoring), satellite retrievals (especially aerosol optical depth, AOD), and atmospheric chemistry models. We find inconsistencies among several publicly available PM2.5 estimates, highlighting uncertainties in the exposure datasets that are often overlooked in health effects analyses. Major differences among PM2.5 estimates emerge from the choice of data (ground-based, satellite, and/or model), the spatiotemporal resolutions, and the algorithms used to fuse data sources.Implications: Fine particulate matter (PM2.5) has large impacts on human morbidity and mortality. Even though the methods for generating the PM2.5 exposure estimates have been significantly improved in recent years, there is a lack of review articles that document PM2.5 exposure datasets that are publicly available and easily accessible by the health and air quality communities. In this article, we discuss the main methods that generate PM2.5 data, compare several publicly available datasets, and show the applications of various data fusion approaches. Guidance to access and critique these datasets are provided for stakeholders in public health sectors.

A statistical model for predicting PM2.5 for the western United States.

A new statistical model for predicting daily ground level fine scale particulate matter (PM2.5) concentrations at monitoring sites in the western United States was developed and tested operationally during the 2016 and 2017 wildfire seasons. The model is site-specific, using a multiple linear regression schema that relies on the previous day's PM2.5 value, along with fire and smoke related variables from satellite observations. Fire variables include fire radiative power (FRP) and the National Fire Danger Rating System Energy Release Component index. Smoke variables, in addition to ground monitored PM2.5, include aerosol optical depth (AOD) and smoke plume perimeters from the National Oceanic and Atmospheric Administration's Hazard Mapping System. The overall statistical model was inspired by a similar system developed for British Columbia (BC) by the BC Center for Disease Control, but it has been heavily modified and adapted to work in the United States. On average, our statistical model was able to explain 78% of the variance in daily ground level PM2.5. A novel method for implementation of this model as an operational forecast system was also developed and was tested and used during the 2016 and 2017 wildfire seasons. This method focused on producing a continuously-updating prediction that incorporated the latest information available throughout the day, including both updated remote sensing data and real-time PM2.5 observations. The diurnal pattern of performance of this model shows that even a few hours of data early in the morning can substantially improve model performance. Implications: Wildfire smoke events produce significant air quality impacts across the western United States each year impacting millions. We present and evaluate a statistical model for making updating predictions of fine particulate (PM2.5) levels during smoke events. These predictions run hourly and are being used by smoke incident specialists assigned to wildfire operations, and may be of interest to public health officials, air quality regulators, and the public. Predictions based on this model will be available on the web for the 2019 western U.S. wildfire season this summer.

Machine Learning-Based Integration of High-Resolution Wildfire Smoke Simulations and Observations for Regional Health Impact Assessment.

Large wildfires are an increasing threat to the western U.S. In the 2017 fire season, extensive wildfires occurred across the Pacific Northwest (PNW). To evaluate public health impacts of wildfire smoke, we integrated numerical simulations and observations for regional fire events during August-September of 2017. A one-way coupled Weather Research and Forecasting and Community Multiscale Air Quality modeling system was used to simulate fire smoke transport and dispersion. To reduce modeling bias in fine particulate matter (PM2.5) and to optimize smoke exposure estimates, we integrated modeling results with the high-resolution Multi-Angle Implementation of Atmospheric Correction satellite aerosol optical depth and the U.S. Environmental Protection Agency AirNow ground-level monitoring PM2.5 concentrations. Three machine learning-based data fusion algorithms were applied: An ordinary multi-linear regression method, a generalized boosting method, and a random forest (RF) method. 10-Fold cross-validation found improved surface PM2.5 estimation after data integration and bias correction, especially with the RF method. Lastly, to assess transient health effects of fire smoke, we applied the optimized high-resolution PM2.5 exposure estimate in a short-term exposure-response function. Total estimated regional mortality attributable to PM2.5 exposure during the smoke episode was 183 (95% confidence interval: 0, 432), with 85% of the PM2.5 pollution and 95% of the consequent multiple-cause mortality contributed by fire emissions. This application demonstrates both the profound health impacts of fire smoke over the PNW and the need for a high-performance fire smoke forecasting and reanalysis system to reduce public health risks of smoke hazards in fire-prone regions.

Air-Quality Impacts and Intake Fraction of PM2.5 during the 2013 Rim Megafire.

The 2013 Rim Fire was the third largest wildfire in California history and burned 257 314 acres in the Sierra Nevada Mountains. We evaluated air-quality impacts of PM2.5 from smoke from the Rim Fire on receptor areas in California and Nevada. We employed two approaches to examine the air-quality impacts: (1) an evaluation of PM2.5 concentration data collected by temporary and permanent air-monitoring sites and (2) an estimation of intake fraction (iF) of PM2.5 from smoke. The Rim Fire impacted locations in the central Sierra nearest to the fire and extended to the northern Sierra Nevada Mountains of California and Nevada monitoring sites. Daily 24-h average PM2.5 concentrations measured at 22 air monitors had an average concentration of 20 µg/m3 and ranged from 0 to 450 µg/m3. The iF for PM2.5 from smoke during the active fire period was 7.4 per million, which is slightly higher than representative iF values for PM2.5 in rural areas and much lower than for urban areas. This study is a unique application of intake fraction to examine emissions-to-exposure for wildfires and emphasizes that air-quality impacts are not only localized to communities near large fires but can extend long distances and affect larger urban areas.