RESUMO
Obtaining accurate data for the contents of biogenic and fossil carbon in thermally-treated waste is essential for determination of the environmental profile of waste technologies. Relations between the variability of waste chemistry and the biogenic and fossil carbon emissions are not well described in the literature. This study addressed the variability of biogenic and fossil carbon in combustible waste received at a municipal solid waste incinerator. Two approaches were compared: (1) radiocarbon dating ((14)C analysis) of carbon dioxide sampled from the flue gas, and (2) mass and energy balance calculations using the balance method. The ability of the two approaches to accurately describe short-term day-to-day variations in carbon emissions, and to which extent these short-term variations could be explained by controlled changes in waste input composition, was evaluated. Finally, the measurement uncertainties related to the two approaches were determined. Two flue gas sampling campaigns at a full-scale waste incinerator were included: one during normal operation and one with controlled waste input. Estimation of carbon contents in the main waste types received was included. Both the (14)C method and the balance method represented promising methods able to provide good quality data for the ratio between biogenic and fossil carbon in waste. The relative uncertainty in the individual experiments was 7-10% (95% confidence interval) for the (14)C method and slightly lower for the balance method.
Assuntos
Carbono/análise , Monitoramento Ambiental/métodos , Resíduos Sólidos/análise , Dióxido de Carbono/análise , Gases/análise , Incineração , Datação Radiométrica/métodos , Fatores de TempoRESUMO
Recycling of materials from municipal solid waste is commonly considered to be superior to any other waste treatment alternative. For the material fractions with a significant energy content this might not be the case if the treatment alternative is a waste-to-energy plant with high energy recovery rates. The environmental impacts from recycling and from incineration of six material fractions in household waste have been compared through life cycle assessment assuming high-performance technologies for material recycling as well as for waste incineration. The results showed that there are environmental benefits when recycling paper, glass, steel and aluminium instead of incinerating it. For cardboard and plastic the results were more unclear, depending on the level of energy recovery at the incineration plant, the system boundaries chosen and which impact category was in focus. Further, the environmental impact potentials from collection, pre-treatment and transport was compared to the environmental benefit from recycling and this showed that with the right means of transport, recyclables can in most cases be transported long distances. However, the results also showed that recycling of some of the material fractions can only contribute marginally in improving the overall waste management system taking into consideration their limited content in average Danish household waste.
Assuntos
Meio Ambiente , Incineração/métodos , Reciclagem/métodos , Gerenciamento de Resíduos/métodos , Cidades , Dinamarca , Utensílios Domésticos , Produtos Domésticos , Modelos Teóricos , Papel , Plásticos , Meios de TransporteRESUMO
Bulky waste is a significant and increasing waste stream in Denmark. However, only little research has been done on its composition and treatment. In the present study, data about collection methods, waste quantities and treatment methods for bulky waste were obtained from two municipalities. In addition a sorting analysis was conducted on combustible waste, which is a major fraction of bulky waste in Denmark. The generation of bulky waste was found to be 150-250 kg capita(-1) year(-1), and 90% of the waste was collected at recycling centres; the rest through kerbside collection. Twelve main fractions were identified of which ten were recyclable and constituted 50-60% of the total quantity. The others were combustible waste for incineration (30-40%) and non-combustible waste for landfilling (10%). The largest fractions by mass were combustible waste, bricks and tile, concrete, non-combustible waste, wood, and metal scrap, which together made up more than 90% of the total waste amounts. The amount of combustible waste could be significantly reduced through better sorting. Many of the waste fractions consisted of composite products that underwent thorough separation before being recycled. The recyclable materials were in many cases exported to other countries which made it difficult to track their destination and further treatment.
Assuntos
Gerenciamento de Resíduos/métodos , Resíduos , Dinamarca , Incineração , Metais , Reciclagem , Eliminação de Resíduos/métodos , MadeiraRESUMO
CO(2)-loads from combustible waste are important inputs for national CO(2) inventories and life-cycle assessments (LCA). CO(2) emissions from waste incinerators are often expressed by emission factors in kg fossil CO(2) emitted per GJ energy content of the waste. Various studies have shown considerable variations between emission factors for different incinerators, but the background for these variations has not been thoroughly examined. One important reason may be variations in collection of recyclable materials as source separation alters the composition of the residual waste incinerated. The objective of this study was to quantify the importance of source separation for determination of emission factors for incineration of residual household waste. This was done by mimicking various source separation scenarios and based on waste composition data calculating resulting emission factors for residual waste routed to incineration. Emission factors ranged from 27 to 40 kg CO(2)/GJ. The results appeared most sensitive towards variations in waste composition and water content. Recycling rates and lower heating values could not be used as simple indicators of the resulting emission factors for residual household waste; however the fossil carbon ratio of the waste after source separation was found to be appropriately correlated with the emission factor. Based on the results, it is recommended to carefully evaluate the source separation and collection systems behind reported literature values when comparing different studies and when using the values for environmental assessment purposes.
Assuntos
Dióxido de Carbono/análise , Monitoramento Ambiental , Incineração/métodos , Reciclagem/métodos , Gerenciamento de Resíduos/métodos , Poluentes Atmosféricos/análise , Poluição do Ar/prevenção & controleRESUMO
The collection, transfer and transport of waste are basic activities of waste management systems all over the world. These activities all use energy and fuels, primarily of fossil origin. Electricity and fuel consumptions of the individual processes were reviewed and greenhouse gases (GHG) emissions were quantified. The emission factors were assigned a global warming potential (GWP) and aggregated into global warming factors (GWFs), which express the potential contribution to global warming from collection, transport and transfer of 1 tonne of wet waste. Six examples involving collection, transfer and transport of waste were assessed in terms of GHG emissions, including both provision and use of energy. (GHG emissions related to production, maintenance and disposal of vehicles, equipment, infrastructure and buildings were excluded.) The estimated GWFs varied from 9.4 to 368 kg CO(2)-equivalent (kg CO(2)-eq.) per tonne of waste, depending on method of collection, capacity and choice of transport equipment, and travel distances. The GHG emissions can be reduced primarily by avoiding transport of waste in private cars and by optimization of long distance transport, for example, considering transport by rail and waterways.
Assuntos
Poluição do Ar/análise , Dióxido de Carbono/análise , Aquecimento Global , Eliminação de Resíduos/métodos , Conservação de Recursos Energéticos , Monitoramento Ambiental , Meios de Transporte/métodosRESUMO
Greenhouse gas (GHG) emissions related to recycling of metals in post-consumer waste are assessed from a waste management perspective; here the material recovery facility (MRF), for the sorting of the recovered metal. The GHG accounting includes indirect upstream emissions, direct activities at the MRF as well as indirect downstream activities in terms of reprocessing of the metal scrap and savings in terms of avoided production of virgin metal. The global warming factor (GWF) shows that upstream activities and the MRF causes negligible GHG emissions (12.8 to 52.6 kg CO(2)-equivalents tonne(-1) recovered metal) compared to the reprocessing of the metal itself (360-1260 kg CO(2)-equivalents tonne(-1) of recovered aluminium and 400- 1020 kg CO(2)-equivalents tonne(- 1) of recovered steel).The reprocessing is however counterbalanced by large savings of avoided virgin production of steel and aluminium. The net downstream savings were found to be 5040-19 340 kg CO(2)-equivalents tonne(-1) of treated aluminium and 560-2360 kg CO(2)-equivalents tonne(-1) of treated steel. Due to the huge differences in reported data it is hard to compare general data on the recovery of metal scrap as they are very dependent on the technology and data choices. Furthermore, the energy used in both the recovery process as well as the avoided primary production is crucial. The range of avoided impact shows that recovery of metals will always be beneficial over primary production, due to the high energy savings, and that the GHG emissions associated with the sorting of metals are negligible.
Assuntos
Poluentes Atmosféricos/análise , Dióxido de Carbono/análise , Conservação dos Recursos Naturais/métodos , Monitoramento Ambiental , Aquecimento Global , Metais , Alumínio , Eliminação de Resíduos/métodos , AçoRESUMO
Greenhouse gas (GHG) emissions related to recycling of glass waste were assessed from a waste management perspective. Focus was on the material recovery facility (MRF) where the initial sorting of glass waste takes place. The MRF delivers products like cullet and whole bottles to other industries. Two possible uses of reprocessed glass waste were considered: (i) remelting of cullet added to glass production; and (ii) re-use of whole bottles. The GHG emission accounting included indirect upstream emissions (provision of energy, fuels and auxiliaries), direct activities at the MRF and bottle-wash facility (combustion of fuels) as well as indirect downstream activities in terms of using the recovered glass waste in other industries and, thereby, avoiding emissions from conventional production. The GHG accounting was presented as aggregated global warming factors (GWFs) for the direct and indirect upstream and downstream processes, respectively. The range of GWFs was estimated to 0-70 kg CO(2)eq. tonne( -1) of glass waste for the upstream activities and the direct emissions from the waste management system. The GWF for the downstream effect showed some significant variation between the two cases. It was estimated to approximately -500 kg CO(2)-eq. tonne(- 1) of glass waste for the remelting technology and -1500 to -600 kg CO(2)-eq. tonne(-1) of glass waste for bottle re-use. Including the downstream process, large savings of GHG emissions can be attributed to the waste management system. The results showed that, in GHG emission accounting, attention should be drawn to thorough analysis of energy sources, especially electricity, and the downstream savings caused by material substitution.
Assuntos
Poluentes Atmosféricos/análise , Dióxido de Carbono/análise , Conservação dos Recursos Naturais/métodos , Monitoramento Ambiental , Vidro , Aquecimento Global , Eliminação de Resíduos/métodosRESUMO
Use of diesel in collection trucks is presumably the most important environmental burden from waste collection because of the emission of exhaust gases from the combustion process. The environmental impact depends not only on the amount of diesel used, but also the on the cleanness of the exhaust gas that is regulated by emission standards. We measured the diesel consumption for 14 different collection schemes in two municipalities in Denmark, yielding a total of 254 measurements. Collection was defined as driving and loading of waste from the first to the final stop on the collection route. All other distances covered were defined as transport of waste, which was modelled in generic transport simulation models. The diesel consumption per tonne of waste in the specified collection schemes turned out to be related to the type of housing and to the amount of waste collected per stop. The observations showed a considerable variation between different collection schemes, ranging from 1.4- 10.1 L diesel tonne(- 1) of waste. Assessment of the potential environmental impact by a life-cycle-assessment method showed a substantial decrease over the last decade because of implementation of European emissions standard for diesel trucks. The paper also discusses the importance of energy used for collection and transport in relation to the potential energy savings from waste treatment. In many cases, the net savings exceed significantly the use of diesel.
Assuntos
Meio Ambiente , Veículos Automotores , Meios de Transporte/estatística & dados numéricos , Emissões de Veículos/análise , Emissões de Veículos/toxicidade , Gerenciamento de Resíduos/métodos , Poluentes Atmosféricos/análise , Poluentes Atmosféricos/toxicidade , Conservação de Recursos Energéticos/métodos , Conservação de Recursos Energéticos/estatística & dados numéricos , Exposição Ambiental/efeitos adversos , Exposição Ambiental/análise , Exposição Ambiental/prevenção & controle , Geografia , Emissões de Veículos/prevenção & controle , Gerenciamento de Resíduos/economia , Gerenciamento de Resíduos/instrumentaçãoRESUMO
Global warming potential (GWP) is an important impact category in life-cycle-assessment modelling of waste management systems. However, accounting of biogenic CO(2) emissions and sequestered biogenic carbon in landfills and in soils, amended with compost, is carried out in different ways in reported studies. A simplified model of carbon flows is presented for the waste management system and the surrounding industries, represented by the pulp and paper manufacturing industry, the forestry industry and the energy industry. The model calculated the load of C to the atmosphere, under ideal conditions, for 14 different waste management scenarios under a range of system boundary conditions and a constant consumption of C-product (here assumed to be paper) and energy production within the combined system. Five sets of criteria for assigning GWP indices to waste management systems were applied to the same 14 scenarios and tested for their ability to rank the waste management alternatives reflecting the resulting CO(2) load to the atmosphere. Two complete criteria sets were identified yielding fully consistent results; one set considers biogenic CO(2) as neutral, the other one did not. The results showed that criteria for assigning global warming contributions are partly linked to the system boundary conditions. While the boundary to the paper industry and the energy industry usually is specified in LCA studies, the boundary to the forestry industry and the interaction between forestry and the energy industry should also be specified and accounted for.
Assuntos
Poluentes Atmosféricos/análise , Dióxido de Carbono/análise , Carbono/análise , Aquecimento Global , Modelos Teóricos , Gerenciamento de Resíduos/métodos , Monitoramento AmbientalRESUMO
Life-cycle assessment (LCA) models are becoming the principal decision support tools of waste management systems. This paper describes our experience with the use of EASEWASTE (Environmental Assessment of Solid Waste Systems and Technologies), a new computerized LCA-based model for integrated waste management. Our findings provide a quantitative understanding of waste management systems and may reveal consistent approaches to improve their environmental performances. EASEWASTE provides a versatile system modelling facility combined with a complete life-cycle impact assessment and in addition to the traditional impact categories addresses toxicity-related categories. New categories dealing with stored ecotoxicity and spoiled groundwater resources have been introduced. EASEWASTE has been applied in several studies, including full-scale assessments of waste management in Danish municipalities. These studies led to numerous modelling issues: the need of combining process-specific and input-specific emissions, the choice of a meaningful time horizon, the way of accounting for biological carbon emissions, the problem of stored ecotoxicity and aspects of crediting the waste management system with the savings inherent in avoided production of energy and materials. Interpretation of results showed that waste management systems can be designed in an environmentally sustainable manner where energy recovery processes lead to substantial avoidance of emissions and savings of resources.