Enhanced TNT vapor sensing through a PMMA-mediated AIPE-active monocyclometalated iridium(III) complex: a leap towards real-time monitoring.

Based on the explosive nature and harmful effects of nitro-based explosive materials on living beings and the environment, it is extremely important to develop luminescence-based probe molecules for their detection with excellent selectivity and sensitivity. Two AIPE (aggregation-induced phosphorescence emission)-active iridium(III) complexes (M1 and M2) were developed for the sensitive detection of TNT in both contact and non-contact modes. The aggregate solutions of both complexes (M1 and M2 in THF/H2O, 1/9 by volume) detected TNT at the pico-molar (pM) level. These complexes showed greatly enhanced emission intensity while embedded in a PMMA(polymethyl methacrylate) matrix film. The amplified quantum efficiency, improved phosphorescence lifetime, and enhanced porous network of M2-PMMA composite helps to improve the sesitivity of TNT vapor detection. Interestingly, the sensitivity of the detection of TNT by the M2 complex was significantly improved (5-fold) in a PMMA-incorporated complex (CP) with an observed limit of detection (LOD) of 12.8 ppb. From the BET analysis of CP, it was observed that the mesoporous network of CP has an average pore diameter of 8.52 nm and a surface area of 2.03 m2 g-1. The porous network of CP assists in trapping TNT vapor in a polymeric network containing an electron-rich probe (iridium(III) complex, M2), which helps to effectively trap TNT, thus enhancing electronic communication. As a result, significant emission quenching was observed.

Controlling the sensitivity and selectivity for the detection of nitro-based explosives by modulating the electronic substituents on the ligand of AIPE-active cyclometalated iridium(III) complexes.

Nitroaromatic compounds are extremely explosive materials that pose a national security risk and raise environmental concerns. The design and development of sensitive and selective compounds for explosive materials are highly desirable. 'Aggregation-Induced Emission' (AIE) active materials are best suited for sensing purposes because of their sensitivity, fast detection time, and easy operation. By rationally incorporating substituents on the cyclometalated (C^N) ligand, four different AIE active iridium(III) based monocyclometalated complexes with the general formula [Ir(PPh3)2(H)(Cl)(C^N)] were synthesized. The phenyl ring of the phenyl pyridine cyclometalated portion of an iridium(III) complex was substituted with the right substituents to adjust the FMO levels thus, leading to appropriate alignment of the energy levels. Each of the resulting complexes displayed a significant property known as 'Aggregation-Induced Phosphorescent Emission' (AIPE). The complexes were subjected to structural characterization, electrochemical analysis, and photophysical property studies. The synthesized complexes were employed for the detection of aromatic nitro explosive compounds such as trinitrophenol (TNP) and trinitrotoluene (TNT) in the aqueous phase with a high degree of sensitivity. The sensing capabilities of each complex were assessed for these nitro explosive compounds and compared to those of the unsubstituted iridium(III) complex (M). Notably, the best limits of detection for TNP and TNT have been achieved with iridium(III) complexes [M1 (489 pM) and M3 (3.6 nM)] within the literature reported until now. For detecting picric acid with M1, FRET was found to be the potential mechanism, and for TNT, PET was found to be the cause of emission quenching by M3. Furthermore, for low-cost detection, filter paper-based sensing was also found effective for each complex. Real-field sensing of PA in soil samples was also performed.

Rational Molecular Designing of Aggregation-Enhanced Emission (AEE) Active Red-Emitting Iridium(III) Complexes: Effect of Lipophilicity and Nanoparticle Encapsulation on Photodynamic Therapy Efficacy.

Two "aggregation-enhanced emission" (AEE) active cyclometalated phosphorescent iridium(III) complexes, SM2 and SM4, were synthesized to evaluate the influence of lipophilicity on photodynamic therapy efficacy. Compared to SM2, SM4 had a higher logP due to the presence of naphthyl groups. As observed by confocal microscopy, this increased lipophilicity of SM4 significantly enhanced its cellular uptake in breast cancer cells. Both the molecules were found to be noncytotoxic under nonirradiating conditions. However, with light irradiation, SM4 exhibited significant cytotoxicity at a 500 nM dose, whereas SM2 remained noncytotoxic, signifying the influence of lipophilicity on cellular internalization and cytotoxicity. Mechanistically, light-irradiated SM4-treated cancer cells exhibited a significant increase in the intracellular reactive oxygen species (ROS) level. Neutralizing ROS with N-acetylcysteine (NAC) pretreatment partly abolished the cytotoxic ability, indicating ROS as one of the major effectors of cell cytotoxicity. Two nanoparticle (NP) formulations of SM4 were developed to improve the intracellular delivery: a PLGA-based NP and a Soluplus-based micelle. Interestingly, PLGA and Soluplus NP formulations exhibited a 10- and 22-fold increased emission intensity, respectively, compared to SM4. There was also an increase in the excited-state lifetime. Additionally, the Soluplus-based micelles encapsulating SM4 exhibited enhanced cellular uptake and increased cytotoxicity compared to the PLGA NPs encapsulating SM4. Altogether, the current study indicates the importance of rational molecular designing and the significance of a proper delivery vector for improving photodynamic therapy efficacy.

Origin of Intense Luminescence from Supramolecular 2D Molecular Crystals.

Luminescence enhancement in 2D molecular crystals (2D crystals) is promising for a variety of optical applications, yet the availability is limited because of unclear mechanism and inefficient design strategy of luminescence control. Herein, the room temperature phosphorescence from micron long molecular thin free-standing 2D crystals of a mono-cyclometalated Ir(III) complex designed at the water surface is reported. A large luminescence enhancement is observed from the 2D crystals at 300 K, which is comparable with the rigidified solution at 77 K suggesting room temperature phosphorescence origin of the luminescence. In situ synchrotron grazing incidence X-ray diffraction measurements determine the constituent centered rectangular unit cells with precise molecular conformation that promotes the formation of 2D crystals. The molecular crystal design leads to a reduced singlet-triplet energy gap (ΔEST ) and mixing of singlet-triplet states by spin-orbit coupling (SOC) for efficient intersystem crossing, which explains the phosphorescence origin at room temperature and luminescence enhancement. The supramolecular assembly process provides an elegant design strategy to realize room temperature phosphorescence from 2D crystals by rigid intermolecular interactions.

Mechanofluorochromism with Aggregation-Induced Emission (AIE) Characteristics: A Perspective Applying Isotropic and Anisotropic Force.

Organic mechanofluorochromic (MFC) materials (that change their emission under anisotropic and isotropic pressure) have attracted a great attention in recent years due to their promising applications in sensing pressure, storage devices, security inks, three-dimensional (3D) printing, etc. Stimuli-responsive organic materials with aggregation-induced emission (AIE) characteristics would be an interesting class of materials to enrich the chemistry of MFC compounds. A diamond anvil cell (DAC) is a small tool that is employed to generate high and uniform pressure on materials over a small area. This article discusses the relationship between the chemical structure of AIE compounds and the change in emission properties under anisotropic (mechanical grinding) and isotropic (hydrostatic) pressure. The luminescent properties of such materials depend on the molecular rearrangement in the lattice, conformational changes, excited state transitions and weak intermolecular interactions. Hence, studying the change in luminescent property of these compounds under varying pressure will provide a deeper understanding of the excited-state properties of various emissive compounds with stress. The development of such materials and studies into the effect of pressure on their luminescence properties are summarized.

'Aggregation-Induced Emission' Active Mono-Cyclometalated Iridium(III) Complex Mediated Efficient Vapor-Phase Detection of Dichloromethane.

Selective vapor-phase detection of dichloromethane (DCM) is a challenge, it being a well-known hazardous volatile organic solvent in trace amounts. With this in mind, we have developed an 'Aggregation-induced Emission' (AIE) active mono-cyclometalated iridium(III)-based (M1) probe molecule, which detects DCM sensitively and selectively in vapor phase with a response time <30 s. It reveals a turn-on emission (non-emissive to intense yellow) on exposing DCM vapor directly to the solid M1. The recorded detection limit is 4.9 ppm for DCM vapor with pristine M1. The mechanism of DCM detection was explored. Moreover, the detection of DCM vapor by M1 was extended with a low-cost filter paper as the substrate. The DCM is weakly bound with the probe and can be removed with a mild treatment, so, notably, the probe can be reused.

Aggregation-Induced Enhanced Emission (AIEE)-Active Conjugated Mesoporous Oligomers (CMOs) with Improved Quantum Yield and Low-Cost Detection of a Trace Amount of Nitroaromatic Explosives.

The article reports a straightforward strategy for the design and synthesis of highly luminescent conjugated mesoporous oligomers (CMOs) with an "aggregation-induced enhanced emission" (AIEE) feature through Wittig polymerization of a molecular rotor. Typical molecular rotors such as triphenylamine (TPA) and tetraphenylethene (TPE) as B2-, and A4- and A3-type nodes have been used to construct AIEE-active CMOs, namely, CMO1 and CMO2. The quick dissipation of the excited photons is successfully controlled by the restriction of rotation of the phenyl units through the formation of a mesoporous network scaffold in a solid/thin film, which provides high quantum yields for the interlocked CMO system. Both the CMOs are sensitive and selective to the various nitroaromatic explosives, whereas CMO1 is more sensitive (Ksv = 2.6 × 106 M-1) toward picric acid. The increased quenching constant for CMO1 is due to its increased quantum yield and high energy-transfer efficiency. The mechanism for sensing has been studied in detail. The larger pore size and pore density in the mesoporous network of CMO1 are found to be responsible for the greater extent of energy transfer from CMO1 to picric acid. Furthermore, CMO1 has been employed for low-cost filter-paper-based detection of a trace amount of nitroaromatic explosive materials.

Facile Incorporation of "Aggregation-Induced Emission"-Active Conjugated Polymer into Mesoporous Silica Hollow Nanospheres: Synthesis, Characterization, Photophysical Studies, and Application in Bioimaging.

Typical aggregation-induced emission (AIE) luminogens tetraphenylethylene (TPE) and triphenylamine have been used to construct an AIE-active conjugated polymer, namely, poly(N,N-diphenyl-4-(4-(1,2,2-triphenylvinyl)styryl)aniline) (PTPA), which consist of D-π-A architecture by Wittig polymerization. We fabricated mesoporous silica hollow nanospheres (MSHNs) which were encapsulated with the AIE-active polymer for applications in cellular imaging. It exhibits a positive solvatochromism effect by increasing solvent polarity, supported by theoretical calculation using density functional theory. The structure of the monomers and polymer was confirmed by Fourier transform infrared, nuclear magnetic resonance, and high-resolution mass spectrometry techniques. Considering the advantage of high brightness in the fluorescence of PTPA, it was encapsulated into MSHNs by a noncovalent approach, and the surface was functionalized with an anti-EpCAM (antiepithelial cell adhesion molecule) aptamer through conjugation with γ-glycidoxypropyltrimethoxysilane for targeting cancer cells specifically. The aptamer-functionalized Apt-MSHNs exhibited excellent biocompatibility with the liver cancer-Huh-7 cells used for this study and was efficiently internalized by these cells. Because EpCAM are overexpressed in multiple carcinomas, including liver cancer, these aptamer-conjugated AIE MSHNs are therefore good candidates for targeted cellular imaging applications.

Exploring the hidden potential of a benzothiazole-based Schiff-base exhibiting AIE and ESIPT and its activity in pH sensing, intracellular imaging and ultrasensitive & selective detection of aluminium (Al3+).

In this article, we tried to redefine the unexplored potential of a benzothiazole type of Schiff-base (OM), which was identified as an AIE-active molecule that exhibits excited-state intramolecular proton transfer (ESIPT). Interestingly, this compound shows ultra-sensitivity and selectivity in the detection of Al(iii) (12 pM; 456 ppt). The OM was capable of pH sensing and was also tested for internalization in cancerous cells for intracellular imaging. Computational modeling was performed and the results were in good agreement with the experimental UV-Vis spectrum and the energy gap obtained in basic and acidic media.

Evaluation of novel platinum(ii) based AIE compound-encapsulated mesoporous silica nanoparticles for cancer theranostic application.

Advanced biomedical research has established that cancer is a multifactorial disorder which is highly heterogeneous in nature and responds differently to different treatment modalities, due to which constant monitoring of therapy response is becoming extremely important. To accomplish this, different theranostic formulations have been evaluated. However, most of them are found to suffer from several limitations extending from poor resolution, radiation damage, to high costs. In order to develop a better theranostic modality, we have designed and synthesized a novel platinum(ii)-based 'aggregation induced emission' (AIE) molecule (named BMPP-Pt) which showed strong intra-cellular fluorescence and also simultaneously exhibited potent cytotoxic activity. Due to this dual functionality, we wanted to explore the possibility of using this compound as a single molecule based theranostic modality. This compound was characterized using elemental analysis, NMR and IR spectroscopy, mass spectrometry and single crystal X-ray structure determination. BMPP-Pt was found to exhibit a high AIE property with emission maxima at 497 nm. For more efficient cancer cell targeting, BMPP-Pt was encapsulated into mesoporous silica nanoparticles (Pt-MSNPs) and the MSNPs were further surface modified with an anti-EpCAM aptamer (Pt-MSNP-E). Pt-MSNPs exhibited higher intracellular fluorescence compared to free BMPP-Pt, though both of them induced a similar degree of cell death via the apoptosis pathway, possibly via cell cycle arrest in the G1 phase. Anti-EpCAM aptamer modification was found to increase both cytotoxicity and intracellular fluorescence compared to unmodified MSNPs. Our study showed that EpCAM functionalized BMPP-Pt loaded MSNPs can efficiently internalize and induce apoptosis of cancer cells as well as show strong intracellular fluorescence. This study provides clues towards the development of a potential single compound based theranostic modality in future.

Induced Aggregation of AIE-Active Mono-Cyclometalated Ir(III) Complex into Supramolecular Branched Wires for Light-Emitting Diodes.

Aggregation-induced emission (AIE) is commonly observed in irregular bulk form. Herein, unique aggregation properties of an AIE-active complex into branched supramolecular wires are reported for the first time. Mono-cyclometalated Ir(III) complex shows in-plane J-aggregation at the air-water interface owing to the restriction of intramolecular vibration of bidentate phenylpyridinato and intramolecular rotations of monodentate triphenylphosphine ligands at air-water interface. As a consequence, a large enhancement of luminescence comparable to the solid state is obtained from the monolayers of supramolecular wires. This unique feature is utilized for the fabrication of light-emitting diodes with low threshold voltage using supramolecular wires as active layer. This study opens up the need of ordered assembly of AIE complexes to achieve optimal luminescence characteristics.

Biosynthesized Protein-Capped Silver Nanoparticles Induce ROS-Dependent Proapoptotic Signals and Prosurvival Autophagy in Cancer Cells.

In recent years, the use of silver nanoparticles (AgNPs) in biomedical applications has shown an unprecedented boost along with simultaneous expansion of rapid, high-yielding, and sustainable AgNP synthesis methods that can deliver particles with well-defined characteristics. The present study demonstrates the potential of metal-tolerant soil fungal isolate Penicillium shearii AJP05 for the synthesis of protein-capped AgNPs. The particles were characterized using standard techniques, namely, UV-visible spectroscopy, transmission electron microscopy, X-ray diffraction, and Fourier transform infrared spectroscopy. The anticancer activity of the biosynthesized AgNPs was analyzed in two different cell types with varied origin, for example, epithelial (hepatoma) and mesenchymal (osteosarcoma). The biological NPs (bAgNPs) with fungal-derived outer protein coat were found to be more cytotoxic than bare bAgNPs or chemically synthesized AgNPs (cAgNPs). Elucidation of the molecular mechanism revealed that bAgNPs induce cytotoxicity through elevation of reactive oxygen species (ROS) levels and induction of apoptosis. Upregulation of autophagy and activation of JNK signaling were found to act as a prosurvival strategy upon bAgNP treatment, whereas ERK signaling served as a prodeath signal. Interestingly, inhibition of autophagy increased the production of ROS, resulting in enhanced cell death. Finally, bAgNPs were also found to sensitize cells with acquired resistance to cisplatin, providing valuable insights into the therapeutic potential of bAgNPs. To the best of our knowledge, this is the first study that provides a holistic idea about the molecular mechanisms behind the cytotoxic activity of protein-capped AgNPs synthesized using a metal-tolerant soil fungus.

"Aggregation induced phosphorescence" active "rollover" iridium(III) complex as a multi-stimuli-responsive luminescence material.

On reaction of 2,2'-bipyridine with iridium(iii), an "aggregation induced phosphorescence (AIP)" active "rollover" complex, [Ir(PPh3)2(bipy-H)(Cl)(H)] (bipy-H = κ(2)-N,C-2,2'-bipyridine) or [Ir(bipy-H)], is obtained. The emission colour changes from bluish-green to yellowish-orange and vice versa after repeated protonation and deprotonation of [Ir(bipy-H)], respectively, which unequivocally supports its reversible nature. [Ir(bipy-H)] is sensitive to acids with different pKa values. Tuning of the emission properties can be achieved in the presence of acids with different pKas. This behaviour allows the complex, [Ir(bipy-H)], to function as a phosphorescent acid sensor in both solution and the solid state, as well as a chemosensor for detecting acidic and basic organic vapours. The protonated form, [Ir(bipy-H)H(+)], which is generated after protonation of [Ir(bipy-H)] can be used as a solvatochromic probe for oxygen containing solvents, and also shows vapochromic properties. The emission, absorption and (1)H NMR spectra of [Ir(bipy-H)] under acidic and basic conditions demonstrate its reversible nature. DFT based calculations suggest that changes in the electron affinity of the pyridinyl rings are responsible for all these processes.

New 'aggregation induced emission (AIE)' active cyclometalated iridium(III) based phosphorescent sensors: high sensitivity for mercury(II) ions.

Design and syntheses of 'aggregation induced emission (AIE)' active blue-emitting bis-cyclometalated iridium(III) complexes with appended diphosphine ligands [Ir(F2ppy)2(L1/L2)2(Cl)] (F2ppy = 2-(2',4'-difluoro) phenylpyridine; L1 = 1,2-bis(diphenylphosphino)ethane; L2 = bis(diphenylphosphino)propane) have been realized on a suitable route. The free phosphorous donor atom present on the appended diphosphine is shown to provide selective binding to the mercuric ion (Hg(2+)). The selective binding ability of the probe molecule towards mercuric ions results in a detectable signal due to complete quenching of their AIE properties. The quenching effect of the probe molecule has been explored and found to be the result of the degradation of the probe iridium(III) complex triggered by the presence of mercuric ions due to an interplay of a soft-soft interaction between the free phosphorous atom of the probe molecule and mercuric ions. These complexes were modelled to obtain deeper understanding of excited state properties and the results were tentatively correlated with the experimental data.

One-pot synthesis of strong solid state emitting mono-cyclometalated iridium(III) complexes: study of their aggregation induced enhanced phosphorescence.

Strong solid-state greenish-blue emitting, mono-cyclometalated iridium complexes, [Ir(ppy)(PPh(3))(2)(H)(Cl)], 2a and [Ir(F(2)ppy)(PPh(3))(2)(H)(Cl)], 2b [ppyH = 2-phenylpyridine; F(2)ppyH = 2-(2',4'-difluoro)phenylpyridine], have been synthesized by a convenient route. The 'aggregation induced enhanced phosphorescence (AIEP)' activity exhibited by these complexes has been rationalized.