RESUMO
Organic photodiodes (OPDs) for its interesting optoelectronic properties has the potential to be utilized with complementary metal-oxide-semiconductor (CMOS) circuit for imaging, automotive, and security based applications. To achieve such a hybrid device as an image sensor, it is imperative that the quality of the OPD remains high on the CMOS substrate and that it has a well-connected optoelectronic interface with the underneath readout integrated circuit (ROIC) for efficient photogeneration and signal readout. Here, we demonstrate seamless integration of a thermally deposited visible light sensitive small molecule OPD on a standard commercial CMOS substrate using optimized doped PCBM buffer layer. Under a standard power supply voltage of 3 V, this hybrid device shows an excellent photolinearity in the entire bias regime, a high pixel sensitivity of 2 V/Lux.sec, a dynamic range (DR) of 71 dB, and a low dark leakage current density of 1 nA/cm2. Moreover, the integrated OPD has a minimum bandwidth of 400 kHz. The photoresponse nonuniformity being only 1.7%, achieved under research lab conditions, strengthens the notion that this fully-CMOS compatible technology has the potential to be applied in high-performance large-scale imaging array.
RESUMO
The validity of using the Lucas-Washburn (LW) equation for porous media characterization by the two-liquid capillary penetration method was tested numerically and experimentally. A cylindrical capillary of known radius and contact angle was used as a model system for the tests. It was found that using the LW equation (i.e., ignoring inertia and dynamic contact angle effects) may lead to very erroneous assessment of the capillary radius and the equilibrium contact angle, for a relatively wide range of capillary radii and equilibrium contact angles. A correct assessment requires the application of a penetration kinetics equation that considers inertia and the dynamic contact angle.
