Use of generic LC-MS/MS assays to characterize atypical PK profile of a biotherapeutic monoclonal antibody.

BACKGROUND: The fully human monoclonal antibody mAb123, which binds to and neutralizes chemokine motif ligand-21 (CCL21) displays a faster clearance in cynomolgus monkey compared with typical IgG kinetics. A direct and an immunoaffinity LC-MS/MS assays were developed to compare with the previously established ligand-binding assays (LBAs). RESULTS: A strong correlation of LC-MS/MS pharmacokinetic data with LBA data confirmed the rapid drug disposition of mAb123 is an intrinsic property of the molecule, rather than interference of anti-mAb123 antibodies in the LBA. CONCLUSION: The data illustrate that in cases of unexpected results from LBA, application of orthogonal bioanalytical techniques such as LC-MS/MS can help in in interpretation of pharmacokinetic as determined by LBAs.

Systematic optimisation of coupled microwave-assisted extraction-solid phase extraction for the determination of pesticides in infant milk formula via LC-MS/MS.

An extraction method consisting of both microwave-assisted extraction (MAE) and solid phase extraction (SPE) was developed to extract pesticides of different polarities in infant milk formula. An experimental central face composite design was established to evaluate the effects of several MAE variables simultaneously such as temperature and pH of extractant. With Derringer desirability function, all pesticides were optimally extracted at 102 °C within 20 min with 4.56 mL of extractant consisting of 0.1% of water in methanol at pH 12. Extraction efficiency was subsequently analysed with LC-MS/MS. The extraction recoveries ranging from 72% to 111% were obtained for all pesticides at fortification level of 5-100 µg kg(-1) with relative standard deviations (RSDs) of less than 8%. Compared with Soxhlet/SPE, the MAE/SPE method utilised less solvent and higher recoveries were achieved with a shorter extraction time.

Optimization of separation of heavy metals by capillary electrophoresis with contactless conductivity detection.

The separation of four toxic metal ions (Cr(3+) , Pb(2+) , Hg(2+) , Ni(2+) ) was achieved by optimizing the composition of the histidine/tartaric acid background electrolyte. An on-column preconcentration technique, viz. field amplified sample injection, was performed to improve the sensitivity. This method afforded an enhancement factor of up to 91,800 fold with the LODs ranging from 0.005 to 2.32 µg/L, which were well below the maximum contaminant levels set by the United States Environmental Protection Agency. The robustness of this method was demonstrated with its application to the analysis of real samples including tap water, drain water, and reservoir water with recoveries between 90 and 120%.

Simultaneous sampling of volatile and non-volatile analytes in beer for fast fingerprinting by extractive electrospray ionization mass spectrometry.

By gently bubbling nitrogen gas through beer, an effervescent beverage, both volatile and non-volatile compounds can be simultaneously sampled in the form of aerosol. This allows for fast (within seconds) fingerprinting by extractive electrospray ionization mass spectrometry (EESI-MS) in both negative and positive ion mode, without the need for any sample pre-treatment such as degassing and dilution. Trace analytes such as volatile esters (e.g., ethyl acetate and isoamyl acetate), free fatty acids (e.g., caproic acid, caprylic acid, and capric acid), semi/non-volatile organic/inorganic acids (e.g., lactic acid), and various amino acids, commonly present in beer at the low parts per million or at sub-ppm levels, were detected and identified based on tandem MS data. Furthermore, the appearance of solvent cluster ions in the mass spectra gives insight into the sampling and ionization mechanisms: aerosol droplets containing semi/non-volatile substances are thought to be generated via bubble bursting at the surface of the liquid; these neutral aerosol droplets then collide with the charged primary electrospray ionization droplets, followed by analyte extraction, desolvation, ionization, and MS detection. With principal component analysis, several beer samples were successfully differentiated. Therefore, the present study successfully extends the applicability of EESI-MS to the direct analysis of complex liquid samples with high gas content.

On the mechanism of extractive electrospray ionization.

Extractive electrospray ionization (EESI) is a powerful ambient ionization technique that can provide comprehensive mass spectrometric (MS) information on aerosols, complex liquids, or suspensions without any sample pretreatment. An understanding of the EESI mechanism is critical for defining its range of application, the advantages, and limitations of EESI, and for improving its repeatability, sensitivity, and selectivity. However, no systematic study of EESI mechanisms has been conducted so far. In this work, fluorescence studies in the EESI plume using rhodamine 6G and H-acid sodium salt directly demonstrate that liquid-phase interactions occur between charged ESI droplets and neutral sample droplets. Moreover, the effect of the composition of the primary ESI spray and sample spray on signals of the analyte in EESI-MS was investigated systematically. The results show that the analyte signals strongly depend on its solubility in the solvents involved, indicating that selective extraction is the dominant mechanism involved in the EESI process. This mechanistic study provides valuable insights for optimizing the performance of EESI in future applications.

Rapid fingerprinting and classification of extra virgin olive oil by microjet sampling and extractive electrospray ionization mass spectrometry.

Microjet sampling in combination with extractive electrospray ionization (EESI) mass spectrometry (MS) was applied to the rapid characterization and classification of extra virgin olive oil (EVOO) without any sample pretreatment. When modifying the composition of the primary ESI spray solvent, mass spectra of an identical EVOO sample showed differences. This demonstrates the capability of this technique to extract molecules with varying polarities, hence generating rich molecular information of the EVOO. Moreover, with the aid of microjet sampling, compounds of different volatilities (e.g.E-2-hexenal, trans-trans-2,4-heptadienal, tyrosol and caffeic acid) could be sampled simultaneously. EVOO data was also compared with that of other edible oils. Principal Component Analysis (PCA) was performed to discriminate EVOO and EVOO adulterated with edible oils. Microjet sampling EESI-MS was found to be a simple, rapid (less than 2 min analysis time per sample) and powerful method to obtain MS fingerprints of EVOO without requiring any complicated sample pretreatment steps.

Combination of 1H nuclear magnetic resonance spectroscopy and liquid chromatography/mass spectrometry with pattern recognition techniques for evaluation of metabolic profile associated with albuminuria.

A method using 1H NMR and LC/MS with pattern recognition tools such as principal component analysis (PCA) and orthogonal projection to latent structure discriminant analysis (O-PLS-DA) was used to study the urinary metabolic profiles associated with an increase in urinary albumin in a general population. The normalized peak intensities obtained from 1H NMR and LC/MS with nonparametric two-tailed Mann-Whitney analysis was used for the identification of network of potential biomarkers corresponding to the increase of albumin in urine. The specificity of detecting the stated metabolites by 1H NMR and LC/MS was demonstrated. Our preliminary data obtained demonstrated that LC/MS may produce more distinctive metabolic profiles. For the patient group, changes in alanine, kyneurnic acid, and xanthurenic acid might be associated with changes in the tryptophan metabolism. At the same time, other metabolites that were involved in citric acid cycle, amino acid metabolism, and cellular functions were affected in the patient group. The proposed approach provided a comprehensive picture of the metabolic changes induced by the increase of protein in urine and demonstrated the advantages of using multiple diagnostic biomarkers. At the same time, the current work was demonstrated as a potential cost-effective solution of high-throughput analysis with pattern recognition tools as applied here in a real clinical situation.

Determination of pharmaceuticals classified as emerging pollutants using capillary electrophoresis with capacitively coupled contactless conductivity detection.

A study on the simultaneous separation of 13 pharmaceutical products by capillary electrophoresis with capacitively coupled contactless conductivity detection was presented. The parameters of the background electrolyte, such as pH, organic additives as well as types and concentrations of cyclodextrins (CD) were studied. The optimal separation conditions were achieved with a background electrolyte consisting of 9 mM Tris/5 mM lactic acid at pH 8.0, containing 5% n-propanol, 0.025% gamma-CD, 0.075% hydroxyl-beta-CD and 0.15% dimethyl-beta-CD. Limits of detections ranged from 61 to 1676 microg/L (S/N=3) and the relative standard deviations for migration time and peak area were below 2 and 6%, respectively. This demonstrated the potential of the capillary electrophoresis-capacitively coupled contactless conductivity detection method for biomedical and environmental analysis, as shown in the determination of pharmaceuticals identified as emerging pollutants in water samples.

Metabonomics investigation of human urine after ingestion of green tea with gas chromatography/mass spectrometry, liquid chromatography/mass spectrometry and (1)H NMR spectroscopy.

A method using gas chromatography/mass spectrometry (GC/MS), liquid chromatography/mass spectrometry (LC/MS) and (1)H NMR with pattern recognition tools such as principle components analysis (PCA) was used to study the human urinary metabolic profiles after the intake of green tea. From the normalized peak areas obtained from GC/MS and LC/MS and peak heights from (1)H NMR, statistical analyses were used in the identification of potential biomarkers. Metabolic profiling by GC/MS provided a different set of quantitative signatures of metabolites that can be used to characterize the molecular changes in human urine samples. A comparison of normalized metabonomics data for selected metabolites in human urine samples in the presence of potential overlapping peaks after tea ingestion from LC/MS and (1)H NMR showed the reliability of the current approach and method of normalization. The close agreements of LC/MS with (1)H NMR data showed that the effects of ion suppression in LC/MS for early eluting metabolites were not significant. Concurrently, the specificity of detecting the stated metabolites by (1)H NMR and LC/MS was demonstrated. Our data showed that a number of metabolites involved in glucose metabolism, citric acid cycle and amino acid metabolism were affected immediately after the intake of green tea. The proposed approach provided a more comprehensive picture of the metabolic changes after intake of green tea in human urine. The multiple analytical approach together with pattern recognition tools is a useful platform to study metabolic profiles after ingestion of botanicals and medicinal plants.

Floating resistivity detector for microchip electrophoresis.

A newly developed conductivity detector, the floating resistivity detector (FRD), for microchip electrophoresis was introduced in this work. The detector design permits decoupling of the detection circuit from the high separation voltage without compromising separation efficiency. This greatly simplifies the integration of microchip electrophoresis systems. Its method of detection relies on platinum electrodes being dipped in two buffer-filled branched detection probe reservoirs on the microchip device. In this way, analytes passing through the detection window will not pass through and subsequently adsorb onto the electrodes, alleviating problems of electrode fouling due to analyte contamination and surface reactions. A customized microchip design was proposed and optimized stepwise for the new FRD system. Each branched detection probe was determined to be 4.50 mm long with a 0.075 mm detection window gap between them. The distance between the detection window and buffer waste reservoir was determined to be 1.50 mm. The optimized microchip design was subsequently used in the analysis of four groups of analytes - inorganic cations, amino acids, aminoglycosides antibiotics, and biomarkers. Based on the preliminary results obtained, the detection limits were in the range of 0.4-0.7 mg/L for the inorganic cations and 1.5-15 mg/L for the amino compounds.

Capillary electrophoresis with capacitively coupled contactless conductivity detection for low molecular weight organic acids in different samples.

CE with capacitively coupled contactless conductivity detection (CE-C(4)D) was explored and validated for the identification and quantification of organic acids in various types of samples. The analyses were performed under optimized conditions, using a buffer system composed of 20 mM MES-histidine (His), pH 6.0, 0.1 mM CTAB, 0.025% HP-beta-CD, and 10% methanol. The investigation included a study of the effects of buffer pH, concentration of CTAB, type and concentration of organic additives, on the migration behavior, resolution and selectivity of the organic acids. The intra- and interday RSDs (n = 6) obtained for migration time and peak area were typically in the range of 0.12-2% and 0.5-4%, respectively. Linearity, detection limits, and repeatability were evaluated. In order to evaluate the application potential of the developed method, real samples from different sources were analyzed. The results demonstrate that CE-C(4)D is a versatile tool for analyzing organic acids in beverages, Chinese herbal medicines (CHM) and plants as it allows for their detection, identification, and quantification.

Rapid identification of purified enteropathogenic Escherichia coli by microchip electrophoresis.

In this work, the potential of PDMS-based microchip electrophoresis in the identifications and characterizations of microorganism was evaluated. Enteropathogenic E. coli (EPEC) was selected as the model microorganism. In this study, separation parameters such as applied voltage, concentrations of buffer and buffer modifier, injection voltage, and duration of injection had been investigated and optimized. Determination of EPEC bacteria could be completed within 2 min with good reproducibility. RSDs were less than 0.5 and 5% in migration time and peak area, respectively. Separation efficiency corresponding to plate number of more than 100,000 was achieved. In order to obtain reproducible separations, sample pretreatment was found to be essential. Microchip electrophoresis with LIF detection could potentially revolutionize certain aspects of microbiology involving diagnosis, profiling of pathogens, environmental analysis, and many other areas of study.

Immunoassay by capillary electrophoresis with quantum dots.

The application of quantum dots in capillary electrophoresis immunoassay was studied for the first time. Quantum dots were conjugated with antibody and subsequently tested by electrophoretic separation of free antibody and antibody-antigen complex. Antibody was fluorescently labeled by quantum dots via conjugation procedures and its electrophoretic characteristics were effectively modified due to the attachment of quantum dots. The determination of human IgM by direct CE based immunoassay could be easily achieved by simply changing the pH value of separation buffer. Polymer additive influenced the separation too but the effect was not as significant as buffer pH adjustment. Satisfactory separation of complex from free antibody could be achieved with 20mM sodium tetraborate as separation buffer, at pH 9.8. The immunoassay application of quantum dots in CE offers considerable advantages and can be readily applied to other large bio-molecules.

Determination of tobramycin in human serum by capillary electrophoresis with contactless conductivity detection.

A study on the determination of the antibiotic tobramycin by CE with capacitively coupled contactless conductivity detection is presented. This method enabled the direct quantification of the non-UV-absorbing species without incurring the disadvantages of the indirect approaches which would be needed for optical detection. The separation of tobramycin from inorganic cations present in serum samples was achieved by optimizing the composition of the acetic acid buffer. Field-amplified sample stacking was employed to enhance the sensitivity of the method and a detection limit of 50 microg/L (S/N = 3) was reached. The RSDs obtained for migration time and peak area using kanamycin B as internal standard were typically 0.12 and 4%, respectively. The newly developed method was validated by measuring the concentration of tobramycin in serum standards containing typical therapeutic concentrations of 2 and 10 mg/L. The recoveries were 96 and 97% for the two concentrations, respectively.

Determination of vitamin C and preservatives in beverages by conventional capillary electrophoresis and microchip electrophoresis with capacitively coupled contactless conductivity detection.

The separation and detection of commonly used preservatives (benzoate, sorbate) and vitamin C by both conventional CE and microchip electrophoresis with capacitively coupled contactless conductivity detection is presented. The separation was optimized by adjusting the pH-value of the buffer and the use of hydroxypropyl-beta-CD (HP-beta-CD) and CTAB as additives. For conventional CE, optimal separation conditions were achieved in a histidine/tartrate buffer at pH 6.5, containing 0.025% HP-beta-CD and 0.1 mM CTAB. LOD ranged from 0.5 to 3 mg/L (S/N = 3) and the RSDs for migration time and peak area were less than 0.1 and 2%, respectively. A considerable reduction of analysis time can be accomplished by using microchip electrophoresis without significant loss in sensitivity under optimal separation conditions. A histidine/tartrate buffer at pH 6.5, incorporating 0.06% HP-beta-CD and 0.25 mM CTAB, gave detection limits ranging between 3 and 10 mg/L and satisfactory reproducibilities of < or =0.4% for the migration time and < or =3.5% for the peak area. The methods developed are useful for the quantitative determination of food additives in real samples such as soft drinks and vitamin C tablets.