Enhanced thermostability of a fungal alkaline protease by different additives.

A fungal strain (Conidiobolus brefeldianus MTCC 5184) isolated from plant detritus secreted a high activity alkaline protease. Thermostability studies of the fungal alkaline protease (FAP) revealed that the protease is stable up to 50°C with 40% residual activity after one hour. Effect of various additives such as sugars, sugar alcohols, polyols, and salts, on the thermostability of FAP was evaluated. Among the additives tested, glycerol, mannitol, xylitol, sorbitol, and trehalose were found to be very effective in increasing the stability of FAP, which was found to be concentration dependent. Fivefold increase in residual activity of FAP was observed in the presence of trehalose (50%) and sorbitol (50%) at 50°C for 4 h, compared to FAP without additive. Other additives like calcium at 20 mM and 10-15% ammonium sulphate showed lower stability improvement than trehalose and sorbitol. NaCl, MgCl2, K2HPO4, and glycine were found to be poor stabilizers and showed only a marginal improvement. PEG 6000 did not show any increase in stability but was found to be slightly inhibitory.

Effect of alkali pretreatment on the structural properties and enzymatic hydrolysis of corn cob.

An effective alkali pretreatment which affects the structural properties of cellulose (corn cob) has been studied. The pretreatment of corn cob was carried out with different combinations of alkali at varying temperatures. The most effective pretreatment of corn cob was achieved with 1 % alkali at 50 °C in 4 h. The crystallinity index (CrI) and specific surface area (SSA) of untreated corn cob was 39 % and 0.52 m(2)/g wherein after alkali pretreatment CrI decreased to 15 % and SSA increased to 3.32 m(2)/g. The fungal organism was identified as Penicillium pinophilum on the basis of ITS sequence. At 5 % substrate concentration using a complete cellulase from Penicillium pinophilum the hydrolysis of untreated corn cob with 5, 10 and 20 FPU/g enzyme loadings were 11 %, 13 % and 16 %, whereas after alkali treatment the hydrolysis increased to 78 %, 90 % and 100 %, respectively. Further hydrolytic potential of commercial cellulases viz. Accellerase™ 1,000, Palkofeel-30 and Palkocel-40 were investigated under similar conditions.

Purification and biochemical characterization of endoglucanase from Penicillium pinophilum MS 20.

Cellulases find increasing prominence in sustainable production of fuel and feedstock from lignocellulosic biomass. The purification and biochemical characterization of individual components of cellulase complex is important to understand the mechanism of their action for the solubilization of crystalline cellulose. In this study, an extra-cellular endoglucanase isolated from culture filtrate of Penicillium pinophilum MS 20 was purified to homogeneity by ammonium sulphate precipitation, ion-exchange chromatography and gel filtration. The purified endoglucanase (specific activity 69 U/mg) was a monomeric protein with molecular mass of 42 kDa, as determined by SDS-PAGE. The endoglucanase was active over a broad range of pH (4-7) with maximum activity at pH 5 and showed optimum temperature of 50 degrees C. It retained 100% activity at 50 degrees C for 6 h and half- lives of 4 h and 3 h at 60 degrees C and 70 degrees C, respectively. The kinetic constants for the endoglucanase determined with carboxymethyl cellulose as substrate were V(max) of 72.5 U/mg and apparent K(m) of 4.8 mg/ml. The enzyme also showed moderate activity towards H3PO4 swollen cellulose and p-nitrophenyl beta-D-glucoside, but no activity towards filter paper, Avicel and oat spelt xylan. The activity was positively modulated by 47, 32 and 25% in the presence of Co2+, Zn2+ and Mg2+, respectively to the reaction mixture. The wide pH stability (4-7) and temperature stability up to 50 degrees C of endoglucanase makes the enzyme suitable for use in cellulose saccharification at moderate temperature and pH.

Studies on biological reduction of chromate by Streptomyces griseus.

Chromium is a toxic heavy metal used in various industries and leads to environmental pollution due to improper handling. The most toxic form of chromium Cr(VI) can be converted to less toxic Cr(III) by reduction. Among the actinomycetes tested for chromate reduction, thirteen strains reduced Cr(VI) to Cr(III), of which one strain of Streptomyces griseus (NCIM 2020) was most efficient showing complete reduction within 24h. The organism was able to use a number of carbon sources as electron donors. Sulphate, nitrate, chloride and carbonate had no effect on chromate reduction during growth while cations such as Cd, Ni, Co and Cu were inhibitory to varying degrees. Chromate reduction was associated with the bacterial cells and sonication was the best method of cell breakage to release the enzyme. The enzyme was constitutive and did not require presence of chromate during growth for expression of activity. Chromate reduction with cell free extract (CFE) was observed without added NADH. However, addition of NAD(P)H resulted in 2-3-fold increase in activity. Chromate reductase showed optimum activity at 28 degrees C and pH 7.

Chromate reduction by PVA-alginate immobilized Streptomyces griseus in a bioreactor.

Microbial reduction of toxic Cr6+ to the less toxic Cr3+ is potentially a useful bioremediation process. Among the matrices tested for whole cell immobilization of an efficient chromate-reducing Streptomyces griseus strain, PVA-alginate was the most effective and was used for reduction of Cr(VI) in a bioreactor. Cr6+ reduction efficiency decreased as Cr6+ was increased from 2 to 12 mg l(-1) but increased with an increase in biomass concentration. However, increasing the flow rate from 2 to 8 ml h(-1) did not significantly affect Cr(6+) reduction. The reduction was faster in simulated effluent than in synthetic medium and complete removal of 8 mg Cr6+ l(-1) from effluent and synthetic medium occurred in 2 and 12 h, respectively. Our results indicate that immobilized S. griseus cells could be applied for the large-scale bioremediation of chromate-containing effluents and wastewaters.

Hexavalent chromate reduction by immobilized Streptomyces griseus.

Hexavalent chromium, which is a mutagen and carcinogen, was efficiently reduced by Streptomyces griseus. This activity was associated with the cell. Cr(6+) reduction by free as well as immobilized cells was studied: cells in PVA-alginate had the highest (100%) Cr(6+) removal efficiency in 24 h with reduction rates similar to free cells. Immobilized cells completely reduced 25 mg Cr(6+) l(-1) in 24 h. PVA-alginate immobilized cells could be reused four times to completely reduce 25 mg Cr(6+) l(-1) in 24 h each time. Chromate in a simulated effluent containing Cu(2+), Mg(2+), Mn(2+) and Zn(2+) was completely reduced by PVA-alginate immobilized cells within 9 h.

Chromium removal and reduction in COD of tannery effluents.

Tannery effluents are highly polluting and contain chromium and high COD and BOD. Alkalotolerant/alkalophilic actinomycetes NCIM 5080 and NCIM 5109 have been shown earlier to tolerate and accumulate chromium during growth also produce alkaline protease in presence of chromium ions. These properties of the isolates are suitable for treatment of tannery effluents which are alkaline and contain chromium and proteinaceous matter. Both the actinomycetes are able to grow in undiluted tannery effluents and remove chromium almost completely and reduce the COD by 70-80% during growth as well as by pregrown biomass.