Analytical Modeling and Optimization of Cu2ZnSn(S,Se)4 Solar Cells with the Use of Quantum Wells under the Radiative Limit.

In this work, we present a theoretical study on the use of Cu2ZnSn(S,Se)4 quantum wells in Cu2ZnSnS4 solar cells to enhance device efficiency. The role of different well thickness, number, and S/(S + Se) composition values is evaluated. The physical mechanisms governing the optoelectronic parameters are analyzed. The behavior of solar cells based on Cu2ZnSn(S,Se)4 without quantum wells is also considered for comparison. Cu2ZnSn(S,Se)4 quantum wells with a thickness lower than 50 nm present the formation of discretized eigenstates which play a fundamental role in absorption and recombination processes. Results show that well thickness plays a more important role than well number. We found that the use of wells with thicknesses higher than 20 nm allow for better efficiencies than those obtained for a device without nanostructures. A record efficiency of 37.5% is achieved when 36 wells with a width of 50 nm are used, considering an S/(S + Se) well compositional ratio of 0.25.

Nitrogen-phosphorus codoped carbon nanotube sponges for detecting volatile organic compounds: experimental and DFT calculations.

The sensing of harmful gases and vapors is of fundamental interest to control the industrial emissions and environmental contamination. Nitrogen/phosphorus codoped carbon nanotube sponges (NP-CNTSs) were used to detect ethanol, acetone, cyclohexane, isopropanol, and methanol. The NP-CNTSs were produced through the aerosol-assisted chemical vapor deposition (AACVD) method using acetonitrile and triphenylphosphine as precursors at 1020 °C. The sensors based on NP-CNTSs were tested with varying operating temperatures (25-100 °C) and gas vapor concentrations (5-50 ppm). For instance, for a gas vapor concentration of 30 ppm and an operating temperature of 65 °C, the sensors showed changes in the electrical resistance of 1.12%, 1.21%, 1.09%, 2.4%, and 1.34% for ethanol, acetone, cyclohexane, isopropanol, and methanol, respectively. We found that the response and recovery times for isopropanol gas vapor are up to 43.7 s and 95 s, respectively. The current sensor outperformed the sensors reported in the literature by at least two times in the response measurement. Additionally, we performed van der Waals density functional theory calculations to elucidate the role of nitrogen and phosphorous codoped single-walled carbon nanotubes (SWCNTs) and their interaction with the considered gas molecule. We analyzed the molecular adsorption energy, optimized structures, and the density of states and calculated the electrostatic potential surface for N-doped, P-doped, NP-codoped, and OH-functionalized NP-codoped metallic SWCNTs-(6,6) and semiconducting SWCNTs-(10,0). Adsorption energy calculations revealed that in most cases the molecules are adsorbed to carbon nanotubes via physisorption. The codoping in SWCNTs-(6,6) promoted structural changes in the surface nanotube and marked chemisorption for acetone molecules.

Ambient Assisted Nutritional Advisor for elderly people living at home.

Nutrition is a critical aspect when getting older because bad nutrition habits can accelerate the process of degradation of the physical condition of the old person. In order to mitigate this problem, an Ambient Assisted Living service has been developed. Research with this service is focused on demonstrating that with an Ambient Intelligence systems it is possible to make the nutritional management much more effective by influencing the user, by automatically and seamlessly monitoring and by facilitating tools for nutritional management for people that want to be autonomous. In this paper both requirement acquisition and development processes are described as well.

Information and assistance bubbles to help elderly people in public environments.

Ambient Assisted Living (AAL) is an emerging bundle of technologies and services that has been specially conceived to support disabled and elderly people to be more autonomous in their daily life. Support for mobility is a key aspect in AAL, and makes elderly people feel very independent and socially integrated. This paper describes an AAL solution to support elderly people outside home: provides information and assistance at the street near public buildings, and inside public buildings. The concept of bubble is proposed in this paper as a physical space where it is possible to consume to a number of local services. Presented mobility-based AAL Services are integrated with an ambient assisted home, so users perceive mobility service as an extension of the care chain beyond the boundaries of their homes.