Ethylene dimerization catalyzed by mixed phosphine-iminophosphorane nickel(II) complexes: a DFT investigation.

A computational study utilizing density functional theory (DFT) was performed to analyze the mechanism of ethylene dimerization catalyzed by (P,N) nickel(II) complexes, where (P,N) is a mixed phosphine-iminophosphorane ligand. Two plausible reaction pathways were considered, namely the Cossee and metallacycle pathways, for three model systems. The fundamental role of ligand asymmetry and the importance of steric and trans effects were elucidated. In order to discriminate between both mechanisms, the activation of the precatalyst by trimethylaluminum was modeled. The results obtained allow the establishment of useful guidelines for creating new specifically tailored nickel-based catalysts for controlled dimerization.

Cobalt-catalyzed vinylation of aromatic halides using ß-halostyrene: experimental and DFT studies.

A new protocol for the direct cobalt-catalyzed vinylation of aryl halides using ß-halostyrene has been developed in order to form functionalized stilbenes. A variety of aromatic halides featuring different reactive group were employed. This method proceeded smoothly with a total retention of the double bond configuration in the presence of triphenylphosphine as ligand. Preliminary DFT calculations rationalize these results and proposed a reaction pathway in agreement with the experimental conditions. This procedure offers a new route to the stereoselective synthesis of stilbenes.

Pd(II) and Ni(II) complexes featuring a "phosphasalen" ligand: synthesis and DFT study.

A phosphorus analog of salen ligands featuring iminophosphorane functionalities in place of the imine groups was synthesised in 2 steps from o-diphenylphosphinophenol via the preparation of the corresponding bis-aminophosphonium salt. This novel tetradentate ligand (1), which we named phosphasalen, was coordinated to Pd(II) and Ni(II) metal centres affording complexes 6 and 7 respectively, which were characterised by multinuclear NMR, elemental and X-ray diffraction analyses. Both neutral complexes adopt a nearly square-planar geometry around the metal with coordination of all iminophosphorane and phenolate moieties. The electronic properties of these new complexes were investigated by cyclic voltammetry and comparison with known salens was made when possible. Moreover, the particular behaviour of the phosphasalen nickel complex 7 was further investigated through magnetic moment measurements and a DFT study.

Mechanism of the dehydrogenative silylation of alcohols catalyzed by cationic gold complexes: an experimental and theoretical study.

The catalytic activity both of cationic [(XDPP)Au][X] (XDPP = bis-2,5-diphenylphosphole xantphos X = BF(4)) and of the isolated gold hydride complex [(XDPP)(2)Au(2)H][OTf] in the dehydrogenative silylation process is presented. A parallel theoretical study using density functional theory revealed a mechanism involving the counter anion as a co-catalyst, which was experimentally confirmed by testing various counterions (X = OTf, NTf(2), PF(6)). Finally, a "Au(2)H(+)" species was determined as the intermediate during the catalytic cycle, which correlates well with the experimental findings on the first example of catalytic activity of an isolated "Au-H" complex.

Double Friedel-Crafts acylation reactions on the same ring of a metallocene: synthesis of a 2,5-diacetylphospharuthenocene.

The synthetic outcome of the Friedel-Crafts acylation of 1',2',3,3',4,4',5'-heptamethylphospharuthenocene reflects the nature of the acylating agent, with alkanoyl anhydride/trifluoromethanesulfonic acid (TfOH) reagents giving monosubstitution at the phospholyl ring, whereas alkanoyl chloride/AlCl(3) gives 2,5-disubstitution. DFT calculations indicate that this unusual double acylation can be facilitated by the intervention of the phosphorus atom at an early stage in the reaction trajectory, with the acyl group being delivered from the phosphorus atom into the ring 2- or 2,5-positions.

Nucleophilic scandium carbene complexes.

Using a geminal dianion as precursor, a nucleophilic scandium carbene complex (2) has been synthesized by salt metathesis on ScCl(3)(THF)(3) in 52% isolated yield. The X-ray structure as well as an NBO analysis points to a double interaction between the carbon and the scandium atoms. Quantification of the electron density donation from the carbon to the metal center, from both σ and π symmetry orbitals, predicts a "nucleophilic carbene" behavior. Addition of benzophenone on complex 2 results in the formation of the expected alkene derivative and the trapping of a rare, µ(3)-oxo-Sc species via a "scandia-Wittig" reaction.

Chiral undecagold clusters: synthesis, characterization and investigation in catalysis.

Enantiopure undecagold clusters protected by chiral atropisomeric diphosphine ligands (P^P) have been synthesized by the stoichiometric reduction of the corresponding (P^P)(AuCl)(2) complexes with NaBH(4). The molecular mono-disperse [Au(11)(P^P)(4)Cl(2)]Cl species have been thoroughly characterized using an array of analytical techniques. (31)P NMR experiments suggested the presence of a slow intramolecular ligand exchange process. Circular dichroism measurements showed that enantiomeric clusters display mirror-image chiroptical activity. Such undecagold clusters containing two chloride ligands bound to the peripheral Au(I) atoms were expected to display a carbophilic Lewis acidity similar to the well-documented molecular Au(I) complex catalysts. Chloride abstraction, performed to generate active Au(+) sites, induced the Au(11) cluster evolution to larger gold clusters and nanoparticles, together with Au(I) complexes, which, in fact, perform the catalysis. This result was corroborated by running an asymmetric tandem hydroarylation-carbocyclization reaction, for which the enantiomeric excesses obtained with Au(11) clusters are similar to those reported using Au(I) complexes.

White phosphorus and metal nanoparticles: a versatile route to metal phosphide nanoparticles.

P(4) reaction with metal NPs (In, Pb, Zn) provides an easy access to the corresponding metal phosphide NPs in a soft and stoichiometric reaction. Size-influence on the reactivity is investigated in the case of indium.

Easy access to uranium nucleophilic carbene complexes.

Metathesis reactions of UCl(4) with Li(2)C(Ph(2)PS)(2) in Et(2)O only afforded the tris-carbene complex [{Li(OEt(2))}(2)U{=C(Ph(2)PS)(2)}(3)] (1), while the bis- and mono-carbene compounds [U{=C(Ph(2)PS)(2)}(2)(THF)(2)] (2) and [{Li(THF)(2)}(2)U{=C(Ph(2)PS)(2)}Cl(4)] (3) were obtained by treatment of UCl(4) with Li(2)C(Ph(2)PS)(2) in a mixture of THF and toluene. The bis-carbene complex 2 was also obtained either from the comproportionation reaction of 1 and UCl(4) or protonolysis reaction of U(NEt(2))(4) with H(2)C(Ph(2)PS)(2) and was transformed into the mono-carbene complex [U{=C(Ph(2)PS)(2)}Cl(2)(THF)(2)] (4) by further reaction with UCl(4). The utility of these complexes as precursors is illustrated by the synthesis of the biscyclopentadienyl derivative [Cp(2)U{=C(Ph(2)PS)(2)}] (5) by treatment of 3 with TlCp. The crystal structures of [U{=C(Ph(2)PS)(2)}(2)(py)(2)].1.5py.0.5THF and 5.toluene are reported.

Interplay between hydrido/dihydrogen and amine/amido ligands in ruthenium-catalyzed transfer hydrogenation of ketones.

This work describes the synthesis of three key intermediates of Noyori-type catalytic systems that are active precatalysts for the transfer hydrogenation of acetophenone. Isolation of the cationic chloro(dihydrogen) complex [RuCl(H(2))(H(2)NNPP)(PCy(3))][BArf(4)] provides a facile synthetic route to the corresponding cationic and neutral hydrido complexes, and the series highlights the links between hydride/dihydrogen and amine/amido ligands in neutral and cationic species.

How the choice of a computational model could rule the chemical interpretation: the Ni(II) catalyzed ethylene dimerization as a case study.

In this article, we present a critical study of the theoretical protocol used for the determination of the nickel(II) catalyzed ethylene dimerization mechanism, considered as a representative example of the various problems related to the modeling a catalytic cycle. The choice of an appropriate computational procedure is indeed crucial for the validity of the conclusions that will be drawn from the computational process. The influence of the exchange-correlation functional on energetic profiles and geometries, the role of the basis set describing the metal atom, as well as the importance of the chosen molecular model, have been thus examined in details. From the obtained results, some general conclusions and guidelines are presented, which could constitute useful warnings in modeling homogenous catalysis. Besides, the database constituted by our high-level calculations can be used within benchmarking procedures to assess the performances of new computational methods based on density functional theory.

Phosphorus stabilized carbene complexes: bisphosphonate dianion synthesis, reactivity and DFT studies of O~C~O zirconium(IV) complexes.

The reactivity of the geminal dianion of tetraisopropyl methylenediphosphonate, 3, with [ZrCl4(THF)2] affords a trinuclear structure 5 in which an unprecedented triscarbene-Zr dianionic fragment is found. The overall trinuclear arrangement is assembled by PO bridging moieties. The X-ray crystal structure of 5 is presented. The reaction of complex 5 with stoichiometric amounts of pyridine affords a dinuclear complex 6 whose formulation was ascertained by an X-ray crystal structure. Complexes 5 and 6 cleanly react with aldehydes (R1)(H)CO to afford the corresponding olefin of general formula [((OiPr)2P=O)2C=C(R1)(H)]. DFT calculations which were carried out on the model complex of 5t and a hypothetical monometallic Zr complex [Zr(3)Cl2(OMe2)2] 8t indicate that the Zr-C bond only features a weak pi-interaction between the carbon atom and a vacant orbital at the metal. The polarization of the orbital towards the carbon center is consistent with the observed nucleophilic character of the carbene complexes described here.

First neodymium(III) alkyl-carbene complex based on bis(iminophosphoranyl) ligands.

Serendipitous deprotonation of bis(iminophosphoranyl)methanide Nd(III) complexes afforded the first alkyl-carbene neodymium complex. Due to the presence of structurally similar methanide and methandiide fragments, this complex features, as evidenced by X-ray crystallographic analysis, Nd-C single and multiple bonds.

Protonation of a xantphos-phosphole ligand. Intramolecular trapping of a P-H phospholium salt.

Protonation of a bidentate xantphos-phosphole ligand by HBF(4) affords only one enantiomer of a cyclic phospholium dihydropholene structure. DFT calculations allowed us to establish that protonation initially takes place at the phosphorus atom of the phosphole moiety to afford a transient P-H phospholium salt, which in turn protonates the C=C double bond of the second phosphole unit.

Cationic dimetallic gold hydride complex stabilized by a xantphos-phosphole ligand: synthesis, X-ray crystal structure, and density functional theory study.

The bis-2,5-diphenylphosphole xantphos ligand (XDPP) 1 reacts with the [AuCl(tht)] complex to afford the monocoordinated [Au(XDPP)Cl] 2 and the dicoordinated chelate species [Au(XDPP)Cl] 3. Addition of AgOTf on this mixture, at room temperature, affords the cationic [Au(XDPP)][OTf] complex 4 which was fully characterized. An X-ray crystal structure analysis confirms the bent structure of this 14 VE [ML(2)](+) complex. Reaction of 4 with HSiMe(2)Ph in tetrahydrofuran at -78 degrees C yields the dinuclear [(XDPP)Au-H-Au(XDPP)](+) cationic complex 5, in which the hydride bridges the two [Au(XDPP)](+) metal fragments. In 5, the Au-P bond lengths are different and the phosphorus atoms which are located nearly trans to the hydride ligand exhibit significantly shorter P-Au bond lengths. Reaction of 4 with DSiMe(2)Ph to form the [(XDPP)Au-D-Au(XDPP)](+) complex 6 allowed to unambiguously ascribe the chemical shift of the deuteride in (2)H NMR (delta = 7.0 ppm with a (2)J(DP) = 8.4 Hz. The electronic structure of the [(XDPP)Au-H-Au(XDPP)](+) complex was studied through density functional theory calculations. An orbital analysis is developed in which complex 5 is viewed as the combination of two 12 electrons fragments [Au(XDPP)](+) with H(-). This analysis reveals that the hydride interacts in a bonding way with the sigma MO between the two gold atoms and in an antibonding way with a combination of d orbitals at the metal centers. This simple description allows to rationalize the inequivalence of the two types of P-Au bonds in 5.

Bonding mode of a new bis-phosphine-borane alkyl ligand to a Rh(I) species.

The stoichiometric reaction of [Rh(COD)Cl](2) with the anion resulting from the deprotonation of dppm(BH(3))(2) yielded a new alkyl Rh(I) complex; the coordination modes of the BH(3) groups are discussed on the basis of X-ray data, variable temperature multinuclear NMR experiments and DFT studies.

PCNCP ligands in the chromium-catalyzed oligomerization of ethylene: tri- versus tetramerization.

Chromium(III) complexes bearing R'N(CH2PR2)2 (PCNCP) ligands have been prepared. Upon activation with methylaluminoxane, these complexes proved to be effective in the selective tri- and tetramerization of ethylene. The formation of either 1-hexene or 1-octene was found to be highly dependent on the steric bulk of the substituents R on the phosphine moieties. This observation was rationalized by using density functional theory calculations on selected steps of the metallacyclic mechanism of the ethylene oligomerization reaction.

Coordination of tetradentate X2N2 (X = P, S, O) ligands to iron(II) metal center and catalytic application in the transfer hydrogenation of ketones.

A series of mixed tetradentate ligands associating two iminophosphorane moieties with two phosphino, thiophosphino, or phosphine oxide groups (labelled 2, 3, and 4 respectively) have been prepared from the corresponding aminophosphonium derivatives. Their coordination to the iron dichloride metal fragment was achieved using the [FeCl(2)(THF)(1.5)] precursor leading to [(P(2)N(2))FeCl(2)] (5), [(S(2)N(2))FeCl(2)] (6), and [(O(2)N(2))FeCl(2)] (7). These complexes were shown to be paramagnetic. Moreover, those ligands can act as bi, tri or tetradentate, as evidenced by X-ray structure analysis of the complexes, depending on the nature of the pendant PY coordinating ligand (Y = lone pair, S, O). Indeed, while only one phosphorus atom is coordinated to iron in 5 (PNN coordination), no thiophosphine moiety is connected to Fe in 6 (NN coordination), whereas both phosphine oxide arms are linked to the metal in 7 (ONNO) coordination. For ligand 2, coordination reactions were also performed with a non-chlorinated iron precursor (either [Fe(CH(3)CN)(6)](BF(4))(2) or [Fe(H(2)O)(6)](BF(4))(2)) leading to complexes 8 and 9 depending on the reaction conditions. The different iron(II) complexes 5-9 were tested in catalytic transfer hydrogenation of acetophenone, and were found to be efficient for reactions carried out at 82 degrees C.

Cobalt-catalyzed formation of symmetrical biaryls and its mechanism.

Effective devotion: An efficient cobalt-catalyzed method devoted to the formation of symmetrical biaryls is described avoiding the preparation of organometallic reagents. Various aromatic halides functionalized by a variety of reactive group reagents are employed. Preliminary DFT calculations have shown that the involvement of a Co(I)/Co(III) couple is realistic at least in the case of 1,3-diazadienes as ligands (FG = functional group).