Input of an Off-Line, Comprehensive, Three-Dimensional Method (CPC×SFC/HRMS) to Quantify Polycyclic Aromatic Hydrocarbons in Vacuum Gas Oils.

Heavy polycyclic aromatic hydrocarbons (HPAHs) are known to cause undesirable effects in petroleum hydrocracking processes by deactivating the catalysts and accumulating in the downstream of reactors. Polycyclic aromatic hydrocarbons with less than seven rings (PAHs) naturally contained in vacuum gas oils (VGOs) act as precursors in the HPAHs formation. However, getting a detailed quantitative characterization of such polycyclic hydrocarbons has never been done until now, because of the high chemical complexity of VGOs. Thus, an off-line, comprehensive, three-dimensional methodology was required to achieve a quantitative analysis: centrifugal partition chromatography (CPC) as the first dimension of separation, supercritical fluid chromatography (SFC) as the second dimension hyphenated to Fourier transform ion cyclotron resonance mass spectrometry as the third dimension. In this study, we demonstrated that the developed CPC method fractionated samples according to the hydrocarbons' alkylation degree, whereas our SFC method provided an elution order according to their double bond equivalent. Finally, high-resolution mass spectrometry (HRMS) brought crucial information on the identity of analytes and proved to be essential in the event of unresolved peaks from CPC and SFC chromatograms. To assess the ability of the three-dimensional method for quantification purposes, matrix effects were evaluated by spiking VGO samples with deuterated pyrene. A strong ion suppression phenomenon was highlighted when using only SFC/HRMS, whereas no significant matrix effect was observed with the CPC×SFC/HRMS approach. These experiments revealed the great potential of this innovative methodology to quantify both PAH and HPAH in VGOs for the first time.

Characterization of liquid-liquid extraction fractions from lignocellulosic biomass by high performance liquid chromatography hyphenated to tandem high-resolution mass spectrometry.

The conversion of lignocellulosic biomass is a major challenge in the field of renewable energies and bio-based chemicals. The diversity of biomasses and processes leads to complex products having a wide range of polarities and molecular weights. Nowadays, the molecular description of these oxygenated matrices is still largely incomplete and new analytical strategies are required to have a better understanding of biomass products properties. The present study proposes a reliable protocol based on successive liquid-liquid extractions prior to high performance liquid chromatography hyphenated to high-resolution tandem mass spectrometry (HPLC/MSn) using a linear ion trap-Fourier transform ion cyclotron resonance mass spectrometer (LTQ/FT-ICR). The protocol allowed to fractionate an industrial sample coming from the sulfuric acid-based pretreatment of a wheat straw into four key chemical families: carbohydrates, organic acids, phenols and neutral compounds. Each fraction was separately analyzed, which limited matrix effects during mass spectrometry ionization step. Electrospray and atmospheric pressure chemical ionization sources were used in both positive and negative modes in order to ionize and detect a maximum of compounds. Thanks to HPLC/MSn, structures of heavy lignin-carbohydrate complexes (LCC) were elucidated (up to 600 g/mol) as well as carbohydrate oligomers having acid functionalities. Mono, di, tri and tetra-aromatic compounds coming from lignin were also detected. The results reported in this paper demonstrate the complexity of pretreated biomass samples and propose an analytical approach from sample simplification to data treatment in order to describe the biomass composition.

Off-line comprehensive size exclusion chromatography × reversed-phase liquid chromatography coupled to high resolution mass spectrometry for the analysis of lignocellulosic biomass products.

Biochemical and thermochemical processes are two pathways to convert lignocellulosic biomass into fuels and chemicals. Both conversion types produce aqueous complex samples containing many oxygenated chemical functions over a wide range of masses. Nowadays, composition of these biomass products is still largely unknown, especially their nonvolatile part (300-1000 Da) mostly made of carbohydrates and their derivatives. In the present study, size exclusion chromatography (SEC) was investigated and applied on water soluble phase of a fast pyrolysis bio-oil (thermochemical conversion) and on aqueous phase of pretreated wheat straw (biochemical conversion). An optimization of mobile phase composition using model molecules was necessary to limit non-steric interactions and elute all chemical families. At the end, separation of carbohydrates, heterosides and aromatic species was performed. The chemical organization of SEC chromatograms was confirmed by coupling SEC with a Fourier transform-ion cyclotron resonance mass spectrometer (FT-ICR MS) using electrospray ionization (ESI) in the negative mode. On-line SEC-UV/FT-ICR MS hyphenation was a powerful tool to provide exact mass distribution of samples and get molecular formulae classed by chemical family. To go further, the complementarity of SEC with reversed-phase liquid chromatography (RPLC) was established with an off-line comprehensive 2D-LC analysis of the two samples. First, 140 fractions were collected physically from SEC separation for each sample, then each fraction was analyzed by RPLC hyphenated to an Ion Trap - Time of Flight mass spectrometer (SEC × RPLC-UV/IT-TOF MS) using ESI in both positive and negative modes. This comprehensive approach combining 2D-LC and high resolution mass spectrometry nearly doubled the number of peaks detected in comparison with 1D RPLC analysis and thus offered well resolved 2D contour plots, considered as relevant analytical fingerprints of the aqueous phase of biomass samples.

A rational strategy based on experimental designs to optimize parameters of a liquid chromatography-mass spectrometry analysis of complex matrices.

A high number of factors controlled by the experimenter has to be optimized to successfully separate, ionize and detect compounds when analyzing complex matrices by liquid chromatography hyphenated to high resolution mass spectrometry (LC-UV/MS). Key steps to manage such hyphenation are focused on desolvation and ionization processes. In this study, a design of experiments approach was used to optimize decisive parameters (i.e. nebulising, drying and sweep gas flow rates, ion transfer capillary voltage and temperature) for electrospray ionization and atmospheric pressure chemical ionization sources both in positive and negative modes. Central composite designs including 131 experiments each were built to cover rationally a sufficiently wide range of operating conditions. Each run was repeated three times to insure stable conditions of ionization and thus a satisfactory repeatability. Extracted ion chromatograms of twelve model oxygenated compounds were integrated and used as responses for experiment designs. Quadratic models for each standard allowed to take into account interactions between factors. Then responses were simultaneously maximized to achieve optimized factors. To illustrate the methodology relevance, optimal conditions were applied to a lignocellulosic biomass fast pyrolysis oil. Thanks to our high sensitivity method, a large number of molecular formulae was identified, as for instance in negative-ion mode electrospray with more than 5500 identified molecular formulae whereas analysis of the same sample by mass spectrometry without any prior chromatographic separation provided less than 2000 molecular formulae. In short, this study proposed a rational methodology to optimize ionization efficiency for LC-UV/MS analysis of complex mixtures.

Suitable interface for coupling liquid chromatography to inductively coupled plasma-mass spectrometry for the analysis of organic matrices. 2 Comparison of Sample Introduction Systems.

Liquid chromatography (LC) coupled with a specific detection such as inductively coupled plasma-mass spectrometry (ICP-MS/MS) is a technique of choice for elementary speciation analysis for complex matrices. The analysis of organic matrices requires the introduction of volatile solvents into the plasma which is an analytical challenge for this coupling technique. Detection sensitivity can be significantly affected by instrumental limitations. Among those, we were interested in the solute dispersion into the interface located between LC and ICP-MS/MS. This interface consists in both a Sample Introduction System (SIS) and a possible flow splitter. This study, divided into two parts, investigated the analytical performance (in terms of sensitivity and efficiency) generated by the coupling of LC and ICP-MS in the specific case of organic matrices. In Part I [1], we previously discussed the impact of extra column dispersion on the performance of LC-ICP-MS, first from a theoretical point of view and next, by assessing extra-column dispersion in 55 published studies on LC-ICP-MS. It was shown that SIS was rarely optimized with respect to its contribution to extra-column band broadening. The critical impact of flow splitting on extra-column dispersion was also pointed out. The present Part II is dedicated to the experimental comparison of commercially available SIS by assessing extra-column band broadening and hence the contribution of SIS to the loss in both efficiency and sensitivity. It is shown that the peak variance, due to SIS, can vary from 10 to 8000 µL² depending on the combination of both nebulizer and spray chamber. Whereas the highest values (i.e. > 2000 µL²) are much too high in high performance liquid chromatography (HPLC), even the lowest values (i.e. < 100 µL²) can be inappropriate in ultra-high pressure liquid chromatography (UHPLC) as highlighted in this study. In light of these results, it appears that nebulizer and spray chamber have to be chosen together with respect to the chromatographic technique (HPLC or UHPLC) and that both peak dispersion and peak intensity depend on key parameters including SIS device geometry, flow rate entering the interface or spray chamber temperature.

Centrifugal partition chromatography as a fractionation tool for the analysis of lignocellulosic biomass products by liquid chromatography coupled to mass spectrometry.

The conversion of lignocellulosic biomass into biofuels and bio-products leads to oxygenated matrices having a wide range of polarities and molecular weights. A complete analytical characterization of these complex mixtures is necessary to improve conversion processes. In this study, an innovative centrifugal partition chromatography (CPC) protocol was developed to fractionate aqueous biomass samples with a MTBE-water solvent system, by mixing elution, displacement and extrusion modes in the same run. This new protocol was validated on model molecules and applied to the water soluble phase of a fast pyrolysis bio-oil. It demonstrated a promising separation with a relevant selectivity on the most significant chemical families of biomass samples: carbohydrates, furans, carboxylic acids and phenols. CPC fractions of the sample were collected and analyzed comprehensively by HPLC-UV/MS (with ESI negative and positive ionization modes). This CPC x LC approach allowed more accurate attributions on the 217 peaks detected. The use of different detection modes gave a complete view of the water soluble phase of a fast pyrolysis bio-oil through 2D maps. Molecular characterization was enhanced by independent information: CPC retention time, LC retention time, UV and MS spectra. Concomitance of these different chemical information is of precious help for unambiguous identification.

Centrifugal partition chromatography a first dimension for biomass fast pyrolysis oil analysis.

Biomass fast pyrolysis oils contain molecules having a large variety of chemical functions and a wide range of molecular weights (from several tens to several thousand grams per mole). The good knowledge of their complex composition is essential for optimizing the conversion of bio-oils to biofuels, thereby requiring powerful separation techniques. In this work, we investigate the interest of centrifugal partition chromatography (CPC) as a first dimension for the analysis of a bio-oil. A CPC method is proposed to separate oxygen containing compounds according to their partition coefficients in the solvent system. This approach is a powerful and easy-to-use technique that enables fractionation of a bio-oil at a semi-preparative scale, without any sample loss related to adsorption on the stationary phase. Collected fractions are then injected in liquid chromatography as a second dimension of separation. Contour plot representations of the CPC × LC separation are established to discuss the potential of this approach. These representations can be used as a veritable fingerprint in the comparison of different samples or samples at different steps of a conversion process but also as a powerful tool to identify new compounds and describe the entire composition of the bio-oil.

Suitable interface for coupling liquid chromatography to inductively coupled plasma-mass spectrometry for the analysis of organic matrices. 1 Theoretical and experimental considerations on solute dispersion.

Liquid chromatography (LC) hyphenated to a specific detection such as inductively coupled plasma-mass spectrometry (ICP-MS) is a technique of choice for elemental speciation analysis. However, various instrumental limitations may considerably reduce the expected sensitivity of the technique. Among those, we were interested by the solute dispersion into the interface located between LC and ICP-MS. The interface consists of a Sample Introduction System (SIS) and a possible flow-splitter prior to SIS. Flow splitting can be required in case of organic matrices to reduce the organic solvent amount entering plasma which may lead to plasma instabilities. Although extra-column dispersion is usually well taken into account with conventional UV detection it has been little studied in the context of LC-ICP-MS and moreover never quantified. Our objective is to assess the loss in column plates and hence in both separation quality and sensitivity which may be generated by the coupling of LC and ICP-MS in the specific case of organic matrices. In this first study, this is done (1) from a theoretical approach; (2) from 55 experimental studies reported in LC-ICP-MS and (3) from our experimental results highlighting the critical impact of the flow splitter on extra-column dispersion depending on both flow-rate and split ratio. It turns out by evaluating the 55 reported studies by means of theoretical calculations, that the loss in plates due to extra-column dispersion was most of the time beyond 50% and even often beyond 90%. Moreover, from our experiments, it has been shown that a very low split ratio (1:50) could generate an additional variance around 200 µL² which induces a loss in theoretical plate of 90% for ultra-high performance LC (UHPLC) column (5 cm × 2.1 mm, 1.7 µm).

Ultra-high performance supercritical fluid chromatography hyphenated to atmospheric pressure chemical ionization high resolution mass spectrometry for the characterization of fast pyrolysis bio-oils.

Extensive characterization of complex mixtures requires the combination of powerful analytical techniques. A Supercritical Fluid Chromatography (SFC) method was previously developed, for the specific case of fast pyrolysis bio oils, as an alternative to gas chromatography (GC and GC × GC) or liquid chromatography (LC and LC × LC), both separation methods being generally used prior to mass spectrometry (MS) for the characterization of such complex matrices. In this study we investigated the potential of SFC hyphenated to high resolution mass spectrometry (SFC-HRMS) for this characterization using Negative ion Atmospheric Pressure Chemical ionization ((-)APCI) for the ionization source. The interface between SFC and (-)APCI/HRMS was optimized from a mix of model compounds with the objective of maximizing the signal to noise ratio. The main studied parameters included both make-up flow-rate and make-up composition. A methodology for the treatment of APCI/HRMS data is proposed. This latter allowed for the identification of molecular formulae. Both SFC-APCI/HRMS method and data processing method were applied to a mixture of 36 model compounds, first analyzed alone and then spiked in a bio-oil. In both cases, 19 compounds could be detected. Among them 9 could be detected in a fast pyrolysis bio-oil by targeted analysis. The whole procedure was applied to the characterization of a bio-oil using helpful representations such as mass-plots, van Krevelen diagrams and heteroatom class distributions. Finally the results were compared with those obtained with a Fourier Transform ion-cyclotron resonance mass spectrometer (FT-ICR/MS).

Development of a supercritical fluid chromatography method with ultraviolet and mass spectrometry detection for the characterization of biomass fast pyrolysis bio oils.

The characterization of complex mixtures is a challenging issue for the development of innovative processes dedicated to biofuels and bio-products production. The huge number of compounds present in biomass fast pyrolysis oils combined with the large diversity of chemical functions represent a bottleneck as regards analytical technique development. For the extensive characterization of complex samples, supercritical fluid chromatography (SFC) can be alternative to usual separation techniques such as gas (GC) or liquid chromatography (LC). In this study, an approach is proposed to define the best conditions for the SFC separation of a fast pyrolysis bio-oil. This approach was based on SFC data obtained directly from the bio-oil itself instead of selecting model compounds as usually done. SFC conditions were optimized by using three specific, easy-to-use and quantitative criteria aiming at maximizing the separation power. Polar stationary phases (ethylpyridine bonded silica) associated to a mix of acetonitrile and water as polarity modifier provided the best results, with more than 120 peaks detected in SFC-UV.

Potential and limitations of on-line comprehensive reversed phase liquid chromatography×supercritical fluid chromatography for the separation of neutral compounds: An approach to separate an aqueous extract of bio-oil.

On-line comprehensive Reversed Phase Liquid Chromatography×Supercritical Fluid Chromatography (RPLCxSFC) was investigated for the separation of complex samples of neutral compounds. The presented approach aimed at overcoming the constraints involved by such a coupling. The search for suitable conditions (stationary phases, injection solvent, injection volume, design of interface) are discussed with a view of ensuring a good transfer of the compounds between both dimensions, thereby allowing high effective peak capacity in the second dimension. Instrumental aspects that are of prime importance in on-line 2D separations, were also tackled (dwell volume, extra column volume and detection). After extensive preliminary studies, an on-line RPLCxSFC separation of a bio-oil aqueous extract was carried out and compared to an on-line RPLCxRPLC separation of the same sample in terms of orthogonality, peak capacity and sensitivity. Both separations were achieved in 100min. For this sample and in these optimized conditions, it is shown that RPLCxSFC (with Hypercarb and Acquity BEH-2EP as stationary phases in first and second dimension respectively) can generate a slightly higher peak capacity than RPLCxRPLC (with Hypercarb and Acquity CSH phenyl-hexyl as stationary phases in first and second dimension respectively) (620 vs 560). Such a result is essentially due to the high degree of orthogonality between RPLC and SFC which may balance for lesser peak efficiency obtained with SFC as second dimension. Finally, even though current limitations in SFC instrumentation (i.e. large extra-column volume, large dwell volume, no ultra-high pressure) can be critical at the moment for on-line 2D-separations, RPLCxSFC appears to be a promising alternative to RPLCxRPLC for the separation of complex samples of neutral compounds.

Development of on-line comprehensive two-dimensional liquid chromatography method for the separation of biomass compounds.

Comprehensive on-line two-dimensional liquid chromatography (on-line LC × LC) was used for the characterization of bio-oils obtained by fast pyrolysis of lignocellulosic biomass. The resulting bio-oil contains a large number of oxygenated chemical families and must therefore be upgraded before being used as drop-in transportation biofuels. The good knowledge of its complex composition is essential for optimizing the mandatory bio-oil upgrading process to biofuels, thereby requiring powerful separation techniques designed to be hyphenated to mass spectrometry detection (LC × LC-MS). In this study, reversed phase conditions were optimized in both dimensions for the RPLC × RPLC separation of the aqueous fraction of bio-oils. The first step of method development consisted in searching for a suitable set of RP-conditions via the screening of a large number of RP-systems (made up of different stationary phases and/or mobile phases and/or temperature). The practical peak capacity and the degree of orthogonality were calculated for a sample of 38 representative compounds, both descriptors having been considered as selection criterion. Two different couplings were chosen and evaluated for the RPLC × RPLC separation of the 38 representative compounds. The best of both, in terms of real practical peak capacity, was further successfully applied to the separation of the aqueous phase of a partially dehydroxygenated bio-oil.