Rhodium nanoparticles stabilized by ferrocenyl-phosphine ligands: synthesis and catalytic styrene hydrogenation.

A series of ferrocenylphosphine-stabilized rhodium nanoparticles has been prepared in one pot from the organometallic [Rh(η3-C3H5)3] precursor. This complex has been decomposed by hydrogen treatment (3 bar) in dichloromethane in the presence of five different ferrocene-based phosphine ligands. Very small rhodium nanoparticles in the size range of 1.1-1.7 nm have been obtained. These nanoparticles have shown activity in a model catalytic reaction, namely the hydrogenation of styrene. These results evidence that the metal surface is not blocked despite the steric bulk of the stabilizing ligands. Moreover, certain selectivity has been observed depending on the ligand employed. To the best of our knowledge, such a type of compound has not yet been used for stabilizing metal nanoparticles and our findings highlight the interest to do so.

Polymer versus phosphine stabilized Rh nanoparticles as components of supported catalysts: implication in the hydrogenation of cyclohexene model molecule.

The solution synthesis of rhodium nanoparticles (Rh NPs) was achieved from the organometallic complex [Rh(η3-C3H5)3] under mild reaction conditions in the presence of a polymer (PVP), a monophosphine (PPh3) and a diphosphine (dppb) as a stabilizer, leading to very small Rh NPs of 2.2, 1.3 and 1.7 nm mean size, with PVP, PPh3 and dppb, respectively. The surface properties of these nanoparticles were compared using a model catalysis reaction namely, hydrogenation of cyclohexene, first under colloidal conditions and then under supported conditions after their immobilization onto an amino functionalized silica-coated magnetite support. PVP-stabilized Rh NPs were the most active catalyst whatever the catalytic conditions as a result of a strong coordination of the phosphine ligands at the metal surface that blocks some surface atoms even after several recycles of the supported nanocatalysts and limit the reactivity of the metallic surface.

Long-chain NHC-stabilized RuNPs as versatile catalysts for one-pot oxidation/hydrogenation reactions.

The synthesis and catalytic activity of long-chain NHC-stabilized RuNPs are presented. Full characterization of these novel nanostructures including surface state studies show that the ligand influences the number and the location of Ru active sites which impacts the NP catalytic activity, especially in hydrogenation reactions. The high stability and versatility of these nanosystems make them successful catalysts for both oxidation and hydrogenation reactions that can even be performed successively in a one pot-fashion.

Development of bi-metallic Fe-Bi nanocomposites: synthesis and characterization.

We investigate the formation of bi-metallic particles in the Fe-Bi system, well known as totally immiscible in the bulk, using a large combination of structural and element-sensitive techniques, well-adapted to the nanoscale. The synthesis approach makes use of the kinetics of decomposition of the different precursors to achieve a controlled sequential growth of the different elements. Different ligands have also been used in order to limit the size and ensure dispersion of the synthesized particles. Our results give evidence for the presence of body-centered cubic ferromagnetic iron nanograins together with larger bismuth crystallites. Interestingly, while the iron particles remain very small, the resistance to oxidation of the Fe-Bi nanocomposites highly depends on the stabilizing ligand used in the synthesis. The presence of both metals, Fe and Bi, in a single cluster has been clearly revealed in the oxidation resistant composite synthesized using the HMDS ligand.

Magnetic properties of Co(N)RhM nanoparticles: experiment and theory?

The magnetism of Co-Rh nanoparticles is investigated experimentally and theoretically. The particles (approximately 2 nm) have been synthesized by decomposition of organometallic precursors in mild conditions of pressure and temperature, under hydrogen atmosphere and in the presence of a polymer matrix. The magnetic properties are determined by SQUID, Mössbauer spectroscopy, and X-ray magnetic circular dichroism (XMCD). The structural and chemical properties are characterized by wide angle X-ray scattering, transmission electronic microscopy and X-ray absorption near edge spectroscopy. All the studied Co-Rh clusters are magnetic with an average spin moment per atom mu that is larger than the one of macroscopic crystals or alloys with similar concentrations. The experimental results and comparison with theory suggest that the most likely chemical arrangement is a Rh core, with a Co-rich outer shell showing significant Co-Rh mixing at the interface. Measured and calculated magnetic anisotropy energies (MAEs) are found to be higher than in pure Co clusters. Moreover, one observes that the MAEs can be tuned to some extent by varying the Rh concentration. These trends are well accounted for by theory, which in addition reveals important spin and orbital moments induced at the Rh atoms as well as significant orbital moments at the Co atoms. These play a central role in the interpretation of experimental data as a function of Co-Rh content. A more detailed analysis from a local perspective shows that the orbital and spin moments at the Co-Rh interface are largely responsible for the enhancement of the magnetic moments and magnetic anisotropy.

Ligand-stabilized ruthenium nanoparticles: synthesis, organization, and dynamics.

The decomposition of the ruthenium precursor Ru(COD)(COT) (1, COD = 1,5-cyclooctadiene; COT = 1,3,5-cyclooctatriene) in mild conditions (room temperature, 1--3 bar H(2)) in THF leads, in the presence of a stabilizer (polymer or ligand), to nanoparticles of various sizes and shapes. In THF and in the presence of a polymer matrix (Ru/polymer = 5%), crystalline hcp particles of uniform mean size (1.1 nm) homogeneously dispersed in the polymer matrix and agglomerated hcp particles (1.7 nm) were respectively obtained in poly(vinylpyrrolidone) and cellulose acetate. The same reaction, carried out using various concentrations relative to ruthenium of alkylamines or alkylthiols as stabilizers (L = C(8)H(17)NH(2), C(12)H(25)NH(2), C(16)H(33)NH(2), C(8)H(17)SH, C(12)H(25)SH, or C(16)H(33)SH), leads to agglomerated particles (L = thiol) or particles dispersed in the solution (L = amine), both displaying a mean size near 2--3 nm and an hcp structure. In the case of amine ligands, the particles are generally elongated and display a tendency to form worm- or rodlike structures at high amine concentration. This phenomenon is attributed to a rapid amine ligand exchange at the surface of the particle as observed by (13)C NMR. In contrast, the particles stabilized by C(8)H(17)SH are not fluxional, but a catalytic transformation of thiols into disulfides has been observed which involves oxidative addition of thiols on the ruthenium surface. All colloids were characterized by microanalysis, infrared spectroscopy after CO adsorption, high-resolution electron microscopy, and wide-angle X-ray scattering.

[Orthopedic treatment of scoliosis: new technique using impression by optic procedure]. / Traitement orthopédique de la scoliose: nouvelle technique de prise d'empreinte par procédé optique.

The authors present a new procedure for acquiring the whole external trunk shape. The construction of braces starts with corrected a positive mold using computer-assisted design software connected to a digital tooling machine. The computer-assisted design and construction of braces enable the determination, measurement, and modification of a three-dimensional image of the trunk, which allows the positive to be corrected. The outer-trunk can be re-balanced, derotated or rectified in the sagittal or frontal plane and the inner modeling of the spine and chest can be rectified. Moreover, in the case of scoliosis or kyphosis, the software produces automatic correction. This rapid (acquisition time < 2 seconds), non invasive, safe and painless procedure can also be used to detect and follow mild spinal deformities.