The Effects of Cholesterol Oxidation on Erythrocyte Plasma Membranes: A Monolayer Study.

Cholesterol plays a key role in the molecular and mesoscopic organisation of lipid membranes and it is expected that changes in its molecular structure (e.g., through environmental factors such as oxidative stress) may affect adversely membrane properties and function. In this study, we present evidence that oxidation of cholesterol has significant effects on the mechanical properties, molecular and mesoscopic organisation and lipid-sterol interactions in condensed monolayers composed of the main species found in the inner leaflet of the erythrocyte membrane. Using a combination of experimental methods (static area compressibility, surface dilatational rheology, fluorescence microscopy, and surface sensitive X-ray techniques) and atomistic molecular dynamics simulations, we show that oxidation of cholesterol to 7-ketocholesterol leads to stiffening of the monolayer (under both static and dynamic conditions), significant changes in the monolayer microdomain organisation, disruption in the van der Waals, electrostatic and hydrophobic interactions between the sterol and the other lipid species, and the lipid membrane hydration. Surface sensitive X-ray techniques reveal that, whilst the molecular packing mode is not significantly affected by cholesterol oxidation in these condensed phases, there are subtle changes in membrane thickness and a significant decrease in the coherence length in monolayers containing 7-ketocholesterol.

Effect of DMSO on the Mechanical and Structural Properties of Model and Biological Membranes.

Dimethyl sulfoxide (DMSO) is widely used in a number of biological and biotechnological applications, mainly because of its effects on the cell plasma membrane, but the molecular origins of this action are yet to be fully clarified. In this work, we used two- and three-component synthetic membranes (liposomes) and the plasma membrane of human erythrocytes to investigate the effect of DMSO when added to the membrane-solvating environment. Fourier transform infrared spectroscopy and thermal fluctuation spectroscopy revealed significant differences in the response of the two types of liposome systems to DMSO in terms of the bilayer thermotropic behavior, available free volume of the bilayer, its excess surface area, and bending elasticity. DMSO also alters the mechanical properties of the erythrocyte membrane in a concentration-dependent manner and is capable of increasing membrane permeability to ATP at even relatively low concentrations (3% v/v and above). Taken in its entirety, these results show that DMSO is likely to have a differential effect on heterogeneous biological membranes, depending on their local composition and structure, and could affect membrane-hosted biological functions.

Binding Pockets in Proteins Induced by Mechanical Stress.

We report the first observation of a pocket that opens as a result of a mechanical force applied to an Ig-like domain from the cardiac muscle. This previously unseen mechanism of pocket formation is revealed by molecular dynamics simulations under force. Preliminary investigations show that this "mechano-pocket" is potentially druggable and could be found in other domains from the same fold family, suggesting the existence of a general mechanism of pocket formation under mechanical stress.

Controlling the Miscibility of X-Shaped Bolapolyphiles in Lipid Membranes by Varying the Chemical Structure and Size of the Polyphile Polar Headgroup.

Bolaamphiphiles are well-known naturally occurring structures that can increase the thermal and mechanical stability of the phospholipid membrane by incorporation in a transmembrane manner. Modifications of bolaamphiphiles to introduce particular structural elements such as a conjugated aromatic backbone and lateral side chains in the hydrophobic region lead to bolapolyphiles (BPs). We investigated the ability of BPs to form lyotropic phases in water. The BPs had an identical backbone and side chains, but different headgroup structures, leading to different abilities to act as hydrogen bond donors and acceptors. BPs with hydrophilic headgroups capable of acting as hydrogen bond donors as well as acceptors did not form lyotropic phases and were insoluble in water, independent of whether the polar groups were small or large. The extended lipophilic core structure and the multiple intermolecular hydrogen bonds between the headgroups prevented the formation of well-hydrated lyotropic aggregates. A BP with two large hydrophilic headgroups of several ethylene oxide moieties terminated by methyl groups formed sheet- and vesicle-like aggregates in water. These headgroups act only as hydrogen bond acceptors and cannot form hydrogen bonds in the absence of water. The miscibility of BPs with vesicles of 1,2-dipalmitoyl- sn-glycero-3-phosphocholine (DPPC) in water and the resulting aggregate structures were also investigated. For BPs with headgroups acting as donors and acceptors of hydrogen bonds, macroscopic phase separation occurred in the mixed membranes, and two different membrane domains, a DPPC-rich one containing only little polyphile and a BP-rich one containing varying amounts of lipid, were formed. For headgroups without the ability to act as hydrogen bond donors, small BP aggregates were formed that were homogeneously distributed over the membrane. The lateral organization of BPs in lipid membranes can thus be controlled by the nature of the BP headgroup.

Constraining Polymers into ß-Turns: Miscibility and Phase Segregation Effects in Lipid Monolayers.

Abstract: Investigation of model biomembranes and their interactions with natural or synthetic macromolecules are of great interest to design membrane systems with specific properties such as drug-delivery. Here we study the behavior of amphiphilic ß-turn mimetic polymer conjugates at the air⁻water interface and their interactions with lipid model membranes. For this endeavor we synthesized two different types of conjugates containing either hydrophobic polyisobutylene (PIB, Mn = 5000 g·mol-1) or helical poly(n-hexyl isocyanate) (PHIC, Mn = 4000 g·mol-1), both polymers being immiscible, whereas polyisobutylene as a hydrophobic polymer can incorporate into lipid membranes. The conjugates were investigated using Langmuir-film techniques coupled with epifluorescence microscopy and AFM (Atomic Force Microscopy), in addition to their phase behavior in mixed lipid/polymer membranes composed of DPPC (dipalmitoyl-sn-glycero-3-phosphocholine). It was found that the DPPC monolayers are strongly disturbed by the presence of the polymer conjugates and that domain formation of the polymer conjugates occurs at high surface pressures (π > 30 mN·m-1).

Self-Assembly of X-Shaped Bolapolyphiles in Lipid Membranes: Solid-State NMR Investigations.

A novel class of rigid-rod bolapolyphilic molecules with three philicities (rigid aromatic core, mobile aliphatic side chains, polar end groups) has recently been demonstrated to incorporate into and span lipid membranes, and to exhibit a rich variety of self-organization modes, including macroscopically ordered snowflake structures with 6-fold symmetry. In order to support a structural model and to better understand the self-organization on a molecular scale, we here report on proton and carbon-13 high-resolution magic-angle spinning solid-state NMR investigations of two different bolapolyphiles (BPs) in model membranes of two different phospholipids (DPPC, DOPC). We elucidate the changes in molecular dynamics associated with three new phase transitions detected by calorimetry in composite membranes of different composition, namely, a change in π-π-packing, the melting of lipid tails associated with the superstructure, and the dissolution and onset of free rotation of the BPs. We derive dynamic order parameters associated with different H-H and C-H bond directions of the BPs, demonstrating that the aromatic cores are well packed below the final phase transition, showing only 180° flips of the phenyl ring, and that they perform free rotations with additional oscillations of the long axis when dissolved in the fluid membrane. Our data suggests that BPs not only form ordered superstructures, but also rather homogeneously dispersed π-packed filaments within the lipid gel phase, thus reducing the corrugation of large vesicles.

Hierarchical Micelles via Polyphilic Interactions: Hydrogen-Bonded Supramolecular Dendrons and Double Immiscible Polymers.

We report a simple strategy to form three-phase segregated hierarchical micelles via a counterbalanced phase segregation/self-assembly process. Our methodology relies on a cooperative polyphilic phase segregation, paralleled by a self-assembly process induced by hydrogen-bonds to afford the generation of supramolecular multicompartment dendrons. The versatile preparation of such hierarchical morphologies is evidenced on the basis of a series of supramolecular dendrons, composed of semifluorinated copolymers, homopolymers, or nonfluorinated polymers. We do have designed and prepared mid- and α,ω-barbiturate (Ba) functionalized poly(n-butyl acrylates), Ba-(PnBuA-Ba)2, together with a series of heterocomplementary α,ω-Hamilton wedge (HW) functionalized polymers via reversible addition-fragmentation chain transfer (co)polymerization. To enable subtle phase segregation processes, the semifluorinated homo- and copolymers HW-P(nBuA-co-PFPA)-HW (prepared via copolymerization of nBuA with 2,2,3,3,3-pentafluoropropyl acrylate (PFPA)) and HW-PPFPA-HW, as well as the nonfluorinated polymer HW-PnBuA-HW and HW-PI-HW (PI, polyisoprene), have been generated. Selective intermolecular complexation between Ba-(PnBuA-Ba)2 and the complementary polymers (such as HW-P(nBuA-co-PFPA)-HW, HW-PPFPA-HW or HW-PI-HW) leads to the successful generation of supramolecular dendrons as evidenced by (1)H NMR and diffusion-ordered NMR spectroscopy, together with the formation of well-defined disc-like nano-objects as demonstrated by microscopy investigations. Transmission electron microscopy demonstrates a unique, uncommon phase behavior showing remarkable three-phase segregated hierarchical micelles, indicative of the desired micellar multicompartments.

Highly asymmetrical glycerol diether bolalipids: synthesis and temperature-dependent aggregation behavior.

In the present work, we describe the synthesis and temperature-dependent aggregation behavior of two examples of a new class of highly asymmetrical glycerol diether bolaphospholipids. The bolalipids contain a long alkyl chain (C32) bound to glycerol in the sn-3 position, carrying a hydroxyl group at the ω position. The C16 alkyl chain in the sn-2 position either possesses a racemic methyl branch at the 10 position of the short alkyl chain (lipid II) or does not (lipid I). The sn-1 position of the glycerol is linked to a zwitterionic phosphocholine moiety. The temperature-dependent aggregation behavior of both bolalipids was studied using differential scanning calorimetry (DSC), Fourier-transform infrared (FTIR) spectroscopy, and X-ray scattering. Aggregate structures were visualized by transmission electron microscopy (TEM). We show that both bolalipids self-assemble into large lamellar sheetlike aggregates. Closed lipid vesicles or other aggregate structures such as tubes or nanofibers, as usually found for diglycerol tetraether lipids, were not observed. Within the lamellae the bolalipid molecules are arranged in an antiparallel (interdigitated) orientation. Lipid I, without an additional methyl moiety in the short alkyl chain, shows a lamellar phase with high crystallinity up to a temperature of 34 °C, which was not observed before for other phospholipids.

Monitoring Demineralization and Subsequent Remineralization of Human Teeth at the Dentin-Enamel Junction with Atomic Force Microscopy.

Using atomic force microscopy, we monitored the nanoscale surface morphology of human teeth at the dentin-enamel junction after performing successive demineralization steps with an acidic soft drink. Subsequently, we studied the remineralization process with a paste containing calcium and phosphate ions. Repeated atomic force microscopy imaging of the same sample areas on the sample allowed us to draw detailed conclusions regarding the specific mechanism of the demineralization process and the subsequent remineralization process. The about 1-µm-deep grooves that are caused by the demineralization process were preferentially filled with deposited nanoparticles, leading to smoother enamel and dentine surfaces after 90 min exposure to the remineralizing agent. The deposited material is found to homogeneously cover the enamel and dentine surfaces in the same manner. The temporal evolution of the surface roughness indicates that the remineralization caused by the repair paste proceeds in two distinct successive phases.

Dendritic domains with hexagonal symmetry formed by x-shaped bolapolyphiles in lipid membranes.

A novel class of bolapolyphile (BP) molecules are shown to integrate into phospholipid bilayers and self-assemble into unique sixfold symmetric domains of snowflake-like dendritic shapes. The BPs comprise three philicities: a lipophilic, rigid, π-π stacking core; two flexible lipophilic side chains; and two hydrophilic, hydrogen-bonding head groups. Confocal microscopy, differential scanning calorimetry, XRD, and solid-state NMR spectroscopy confirm BP-rich domains with transmembrane-oriented BPs and three to four lipid molecules per BP. Both species remain well organized even above the main 1,2-dipalmitoyl-sn-glycero-3-phosphocholine transition. The BP molecules only dissolve in the fluid membrane above 70 °C. Structural variations of the BP demonstrate that head-group hydrogen bonding is a prerequisite for domain formation. Independent of the head group, the BPs reduce membrane corrugation. In conclusion, the BPs form nanofilaments by π stacking of aromatic cores, which reduce membrane corrugation and possibly fuse into a hexagonal network in the dendritic domains.

Temperature-dependent in-plane structure formation of an X-shaped bolapolyphile within lipid bilayers.

Polyphilic compound B12 is an X-shaped molecule with a stiff aromatic core, flexible aliphatic side chains, and hydrophilic end groups. Forming a thermotropic triangular honeycomb phase in the bulk between 177 and 182 °C but no lyotropic phases, it is designed to fit into DPPC or DMPC lipid bilayers, in which it phase separates at room temperature, as observed in giant unilamellar vesicles (GUVs) by fluorescence microscopy. TEM investigations of bilayer aggregates support the incorporation of B12 into intact membranes. The temperature-dependent behavior of the mixed samples was followed by differential scanning calorimetry (DSC), FT-IR spectroscopy, fluorescence spectroscopy, and X-ray scattering. DSC results support in-membrane phase separation, where a reduced main transition and new B12-related transitions indicate the incorporation of lipids into the B12-rich phase. The phase separation was confirmed by X-ray scattering, where two different lamellar repeat distances are visible over a wide temperature range. Polarized ATR-FTIR and fluorescence anisotropy experiments support the transmembrane orientation of B12, and FT-IR spectra further prove a stepwise "melting" of the lipid chains. The data suggest that in the B12-rich domains the DPPC chains are still rigid and the B12 molecules interact with each other via π-π interactions. All results obtained at temperatures above 75 °C confirm the formation of a single, homogeneously mixed phase with freely mobile B12 molecules.

The headgroup (a)symmetry strongly determines the aggregation behavior of single-chain phenylene-modified bolalipids and their miscibility with classical phospholipids.

In the present work, we describe the synthesis of two single-chain phenylene-modified bolalipids, namely PC-C17pPhC17-PC and PC-C17pPhC17-OH, with either symmetrical (phosphocholine) or asymmetrical (phosphocholine and hydroxyl) headgroups using a Sonogashira cross-coupling reaction as key step. The temperature-dependent aggregation behavior of both bolalipids in aqueous suspension was studied using transmission electron microscopy (TEM), differential scanning calorimetry (DSC), Fourier-transform infrared (FTIR) spectroscopy, small angle neutron scattering (SANS), and X-ray scattering. We show that different headgroup symmetries lead to a change in the aggregation behavior: Whereas PC-C17pPhC17-PC forms nanofibers with a diameter of 5.7 nm that transform into small ellipsoidal micelles at 23 °C, the PC-C17pPhC17-OH self-assembles into lamellae with bolalipid molecules in an antiparallel orientation up to high temperatures. Furthermore, the mixing behavior of both bolalipids with bilayer-forming phospholipids (DPPC and DSPC) was studied by means of DSC and TEM. The aim was to stabilize bilayer membranes formed of phospholipids in order to improve these mixed lipid vesicles for drug delivery purposes. We show that the symmetrical PC-C17pPhC17-PC is miscible with DPPC and DSPC; however, closed lipid vesicles are not observed, and elongated micelles and bilayer fragments are found instead. In contrast, the asymmetrical PC-C17pPhC17-OH shows no miscibility with phospholipids at all.

Controlling the localization of polymer-functionalized nanoparticles in mixed lipid/polymer membranes.

Surface hydrophobicity plays a significant role in controlling the interactions between nanoparticles and lipid membranes. In principle, a nanoparticle can be encapsulated into a liposome, either being incorporated into the hydrophobic bilayer interior or trapped within the aqueous vesicle core. In this paper, we demonstrate the preparation and characterization of polymer-functionalized CdSe NPs, tuning their interaction with mixed lipid/polymer membranes from 1,2-dipalmitoyl-sn-glycero-3-phophocholine and PIB(87)-b-PEO(17) block copolymer by varying their surface hydrophobicity. It is observed that hydrophobic PIB-modified CdSe NPs can be selectively located within polymer domains in a mixed lipid/polymer monolayer at the air/water interface, changing their typical domain morphologies, while amphiphilic PIB-PEO-modified CdSe NPs showed no specific localization in phase-separated lipid/polymer films. In addition, hydrophilic water-soluble CdSe NPs can readily adsorb onto spread monolayers, showing a larger effect on the molecule packing at the air/water interface in the case of pure lipid films compared to mixed monolayers. Furthermore, the incorporation of PIB-modified CdSe NPs into hybrid lipid/polymer GUVs is demonstrated with respect to the prevailing phase state of the hybrid membrane. Monitoring fluorescent-labeled PIB-CdSe NPs embedded into phase-separated vesicles, it is demonstrated that they are enriched in one specific phase, thus probing their selective incorporation into the hydrophobic portion of PIB(87)-b-PEO(17) BCP-rich domains. Thus, the formation of biocompatible hybrid GUVs with selectively incorporated nanoparticles opens a new perspective for subtle engineering of membranes together with their (nano-) phase structure serving as a model system in designing functional nanomaterials for effective nanomedicine or drug delivery.

A T-shaped amphiphilic molecule forms closed vesicles in water and bicelles in mixtures with a membrane lipid.

The T-shaped amphiphilic molecule A6/6 forms a columnar hexagonal liquid-crystalline phase between the crystalline and the isotropic liquid when studied in bulk (Chen et al., 2005). Because of the hydrophilic and flexible oligo(oxyethylene) side chain terminated by a 1-acylamino-1-deoxy-d-sorbitol moiety attached to a rigid terphenyl core with terminal hexyloxy alkyl chains, it was expected that also formation of lyotropic phases could be possible. We therefore studied the behavior of A6/6 in water and also in mixtures with bilayer-forming phospholipids, such as dipalmitoyl-phosphatidylcholine (DPPC), using differential scanning calorimetry (DSC), transmission electron microscopy (TEM), cryo-transmission electron microscopy (cryo-TEM), dynamic light scattering (DLS), and solid-state nuclear magnetic resonance (ssNMR). DSC showed for the pure A6/6 suspended in water a phase transition at ca. 23 °C. TEM and cryo-TEM showed vesicular as well as layered structures for pure A6/6 in water below and above this phase transition. By atomic force microscopy (AFM), the thickness of the layer was found to be 5-6 nm. This leads to a model for a bilayer formed by A6/6 with the laterally attached polar side chains shielding the hydrophobic layer built up by the terphenyl core with the terminal alkyl chains of the molecules. For DPPC:A6/6 mixtures (10:1), the DSC curves indicated a stabilization of the lamellar gel phase of DPPC. Negative staining TEM and cryo-TEM images showed planar bilayers with hexagonal morphology and diameters between 50 and 200 nm. The hydrodynamic radius of these aggregates in water, investigated by dynamic light scattering (DLS) as a function of time and temperature, did not change indicating a very stable aggregate structure. The findings lead to the proposition of a new bicellar structure formed by A6/6 with DPPC. In this model, the bilayer edges are covered by the T-shaped amphiphilic molecules preventing very effectively the aggregation to larger structures.

N,N'-Dicyclo-hexyl-ethyl-enediammonium dichloride.

In the title compound, C(14)H(30)N(2) (2+)·2Cl(-), the N,N'-dicyclo-hexyl-ethyl-enediammonium cation posseses crystallographic symmetry, and thus the compound crystallizes with two formula units per unit cell. In the crystal, the cations and anions are linked by N-H⋯Cl hydrogen bonds, giving a two-dimensional network with {6,3} topology.