Electrochemical Assessment of Indigo Carmine Dye in Lithium Metal Polymer Technology.

Lithium metal batteries are inspiring renewed interest in the battery community because the most advanced designs of Li-ion batteries could be on the verge of reaching their theoretical specific energy density values. Among the investigated alternative technologies for electrochemical storage, the all-solid-state Li battery concept based on the implementation of dry solid polymer electrolytes appears as a mature technology not only to power full electric vehicles but also to provide solutions for stationary storage applications. With an effective marketing started in 2011, BlueSolutions keeps developing further the so-called lithium metal polymer batteries based on this technology. The present study reports the electrochemical performance of such Li metal batteries involving indigo carmine, a cheap and renewable electroactive non-soluble organic salt, at the positive electrode. Our results demonstrate that this active material was able to reversibly insert two Li at an average potential of ≈2.4 V vs. Li+/Li with however, a relatively poor stability upon cycling. Post-mortem analyses revealed the poisoning of the Li electrode by Na upon ion exchange reaction between the Na countercations of indigo carmine and the conducting salt. The use of thinner positive electrodes led to much better capacity retention while enabling the identification of two successive one-electron plateaus.

Quantification of the Local Topological Variations of Stripped and Plated Lithium Metal by X-ray Tomography.

Lithium (Li) metal is the most promising negative electrode to be implemented in batteries for stationary and electric vehicle applications. For years, its use and subsequent industrialization were hampered because of the inhomogeneous Li+ ion reduction upon recharge onto Li metal leading to dendrite growth. The use of solid polymer electrolyte is a solution to mitigate dendrite growth. Li reduction leads typically to dense Li deposits, but the Li stripping and plating process remain nonuniform with local current heterogeneities. A precise characterization of the behavior of these heterogeneities during cycling is then essential to move toward an optimized negative electrode. In this work, we have developed a characterization method based on X-ray tomography applied to model Li symmetric cells to quantify and spatially probe the Li stripping/plating processes. Ante- and post-mortem cells are recut in smaller cells to allow a 1 µm voxel size resolution in a conventional laboratory scanner. The reconstructed cell volume is postprocessed to numerically reflatten the Li electrodes, allowing us a subsequent precise measurement of the electrode and electrolyte thicknesses and revealing local interface modifications. This in-depth analysis brings information about the location of heterogeneities and their impact on the electrode microstructure at both the electrode grains and grain boundaries. We show that the plating process (reduction) induces more pronounced heterogeneities compared to the stripping (oxidation) one. The existence of crosstalking between the electrodes is also highlighted. In addition, this simple methodology permits to finely retrieve and then surface map the local current density at both electrodes based on the local thickness change during the redox process.

Thermomechanical Polymer Binder Reactivity with Positive Active Materials for Li Metal Polymer and Li-Ion Batteries: An XPS and XPS Imaging Study.

The lithium and lithium-ion battery electrode chemical stability in the pristine state has rarely been considered as a function of the binder choice and the electrode processing. In this work, X-ray photoelectron spectroscopy (XPS) and XPS imaging analyses associated with complementary Mössbauer spectroscopy are used in order to study the chemical stability of two pristine positive electrodes: (i) an extruded LiFePO4-based electrode formulated with different polymer matrices [polyethylene oxide and a polyvinylidene difluoride (PVdF)] and processed at different temperatures (90 and 130 °C, respectively) and (ii) a Li[Ni0.5Mn0.3Co0.2]O2 (NMC)-based electrode processed by tape-casting, followed by a mild or heavy calendering treatment. These analyses have allowed the identification of reactivity mechanisms at the interface of the active material and the polymer in the case of PVdF-based electrodes.