Nanoscale-cavity enhancement of color conversion with colloidal quantum dots embedded in the surface nano-holes of a blue-emitting light-emitting diode.

Although the method of inserting colloidal quantum dots (QDs) into deep nano-holes fabricated on the top surface of a light-emitting diode (LED) has been widely used for producing effective Förster resonance energy transfer (FRET) from the LED quantum wells (QWs) into the QDs to enhance the color conversion efficiency, an important mechanism for enhancing energy transfer in such an LED structure was overlooked. This mechanism, namely, the nanoscale-cavity effect, represents a near-field Purcell effect and plays a crucially important role in enhancing the color conversion efficiency. Here, we demonstrate the results of LED performance, time-resolved photoluminescence (TRPL), and numerical simulation to elucidate the nanoscale-cavity effect on color conversion by inserting a photoresist solution of red-emitting QDs into the nano-holes fabricated on a blue-emitting QW LED. Based on the TRPL study of the inserted QDs in a nano-hole structure fabricated on an un-doped GaN template of no QW, it is found that the emission efficiency of the inserted QDs is significantly increased due to the nanoscale-cavity effect. From the simulation study, it is confirmed that this effect can also increase the FRET efficiency, particularly for those radiating dipoles in the QWs oriented perpendicular to the sidewalls of the nano-holes. In the nanoscale-cavity effect, the enhanced near field distribution inside a nano-hole excited by a light emitter modifies its own radiation behavior through the Purcell effect such that its far-field emission becomes stronger.

Enhancement of the Modulation Response of Quantum-Dot-Based Down-Converted Light through Surface Plasmon Coupling.

In this paper, we first elaborate on the effects of surface plasmon (SP) coupling on the modulation responses of the emission of a light-emitting diode (LED) and its down-converted lights through colloidal quantum dots (QDs). The results of our past efforts for this subject are briefly discussed. The discussions lay the foundation for the presentation of the new experimental data of such down-converted lights in this paper. In particular, the enhancement of the modulation bandwidth (MB) of a QD-based converted light through SP coupling is demonstrated. By linking green-emitting QDs (GQDs) and/or red-emitting QDs (RQDs) with synthesized Ag nano-plates via surface modifications and placing them on a blue-emitting LED, the MBs of the converted green and red emissions are significantly increased through the induced SP coupling of the Ag nano-plates. When both GQD and RQD exist and are closely spaced in a sample, the energy transfer processes of emission-reabsorption and Förster resonance energy transfer from GQD into RQD occur, leading to the increase (decrease) in the MB of green (red) light. With SP coupling, the MB of a mixed light is significantly enhanced.

Further emission efficiency improvement of a commercial-quality light-emitting diode through surface plasmon coupling.

It is usually believed that surface plasmon (SP) coupling is practically useful only for improving the performance of a light-emitting diode (LED) with a low intrinsic internal quantum efficiency (IQE). In this Letter, we demonstrate that the performance of a commercial-quality blue LED with a high IQE (>80%) can still be significantly improved through SP coupling based on a surface Ag nanoparticle (NP) structure. The performance improvement of such an LED is achieved by increasing the Mg doping concentration in its p-AlGaN electron blocking layer to enhance the hole injection efficiency such that the p-GaN layer thickness can be significantly reduced without sacrificing its electrical property. In this situation, the distance between surface Ag NPs and quantum wells is decreased and hence SP coupling strength is increased. By reducing the distance between the surface Ag NPs and the top quantum well to 66 nm, the IQE can be increased to almost 90% (an ∼11% enhancement) and the electroluminescence intensity can be enhanced by ∼24%.

Acquired duodenal obstruction in children.

Traumatic intramural hematoma of the duodenum is a rare cause of acquired duodenal obstruction in children, and a high degree of suspicion is therefore required to make an early and accurate diagnosis. We report a 6-year-old boy whose epigastrium was impacted by the handlebar of his bicycle during a traffic accident. The boy then experienced epigastralgia. Six days later, progressive bilious vomiting suggestive of gastrointestinal obstruction was noted. Imaging studies revealed a large hematoma extending from the fourth portion of the duodenum to the jejunum. Conservative methods of treatment failed to manage his condition. He underwent laparoscopic surgery to evacuate the hematoma. We also report a case of duodenal obstruction in a previously healthy 2-year-old girl who presented for the first time with acute symptoms of proximal intestinal obstruction. Contrast examinations showed apparent barium retention over the stomach and proximal duodenum. She underwent surgery due to persistent obstruction, and a mushroom-like foreign body was detected embedded in the orifice of the windsock duodenal web. After duodenoduodenostomy and removal of the bezoar, she had a smooth recovery and tolerated feeding well. We conclude that blunt abdominal trauma and incomplete duodenal obstruction, such as that caused by duodenal web, should be considered as possible causes of acquired proximal gastrointestinal obstruction in previously healthy children, despite their rarity.