Electrochemical Characteristics of Pyrolytic Carbon Coated Silicon for Anode Materials of Lithium Ion Batteries.

Pyrolytic carbon coated silicon is prepared and employ it as an anode material for lithium secondary batteries. The pyrolytic carbon coating of silicon with sucrose precursor not only provides a suitable carbon matrix but also suppresses the breaking away of Si from the current collector during the insertion and extraction of Li+. The increase of disordered carbon content leads to the increase of discharge capacity retention. The improvements of cycle stability are attributed to a decrease in the volume change of the silicon, good networking between Si particles, and good adhesion of the current collector with the active material. The nano Si combined with the disordered carbon leads to an increase of capacity retention and initial coulombic efficiency.

Enhanced photovoltaic performance of Cu-based metal-organic frameworks sensitized solar cell by addition of carbon nanotubes.

In the present work, TiO2 nanoparticle and multi-walled carbon nanotubes composite powder is prepared hydrothermally. After doctor blading the paste from composite powder, the resulted composite film is sensitized with Cu-based metal-organic frameworks using a layer-by-layer deposition technique and the film is characterized using FE-SEM, EDX, XRD, UV/Visible spectrophotometry and photoluminescence spectroscopy. The influence of the carbon nanotubes in photovoltaic performance is studied by constructing a Grätzel cell with I3(-)/I(-) redox couple containing electrolyte. The results demonstrate that the introduction of carbon nanotubes accelerates the electron transfer, and thereby enhances the photovoltaic performance of the cell with a nearly 60% increment in power conversion efficiency.

Structural and optical properties of chemically deposited CuInSe2 thin film in acidic medium.

Thin films of nanocrystalline CuInSe2 were prepared on glass substrates using chemical bath deposition in acidic medium at room temperature. Thickness of the chemically deposited CuInSe2 thin films was approximately 100 nm which composed of closely packed irregular grains of approximately 100-120 nm in diameter. X-ray diffraction pattern of CuInSe2 thin films showed nanocrystalline structure with (112) preferential orientation. The films exhibited faint black and direct band gap energy was 0.96 eV.