Scalable Fabrication of Quasi-One-Dimensional van der Waals Ta2Pt3Se8 Nanowire Thin Films via Solution Processing for NO2 Gas Sensing over Large Areas.

Solution-based processing of van der Waals (vdW) one- (1D) and two-dimensional (2D) materials is an effective strategy to obtain high-quality molecular chains or atomic sheets in a large area with scalability. In this work, quasi-1D vdW Ta2Pt3Se8 was exfoliated via liquid phase exfoliation (LPE) to produce a stably dispersed Ta2Pt3Se8 nanowire solution. In order to screen the optimal exfoliation solvent, nine different solvents were employed with different total surface tensions and polar/dispersive (P/D) component (P/D) ratios. The LPE behavior of Ta2Pt3Se8 was elucidated by matching the P/D ratios between Ta2Pt3Se8 and the applied solvent, resulting in N-methyl-2-pyrrolidone (NMP) as an optimal solvent owing to the well-matched total surface tension and P/D ratio. Subsequently, Ta2Pt3Se8 nanowire thin films are manufactured via vacuum filtration using a Ta2Pt3Se8/NMP dispersion. Then, gas sensing devices are fabricated onto the Ta2Pt3Se8 nanowire thin films, and gas sensing property toward NO2 is evaluated at various thin-film thicknesses. A 50 nm thick Ta2Pt3Se8 thin-film device exhibited a percent response of 25.9% at room temperature and 32.4% at 100 °C, respectively. In addition, the device showed complete recovery within 14.1 min at room temperature and 3.5 min at 100 °C, respectively.

In vivo magnetogenetics for cell-type-specific targeting and modulation of brain circuits.

Neuromodulation technologies are crucial for investigating neuronal connectivity and brain function. Magnetic neuromodulation offers wireless and remote deep brain stimulations that are lacking in optogenetic- and wired-electrode-based tools. However, due to the limited understanding of working principles and poorly designed magnetic operating systems, earlier magnetic approaches have yet to be utilized. Furthermore, despite its importance in neuroscience research, cell-type-specific magnetic neuromodulation has remained elusive. Here we present a nanomaterials-based magnetogenetic toolbox, in conjunction with Cre-loxP technology, to selectively activate genetically encoded Piezo1 ion channels in targeted neuronal populations via torque generated by the nanomagnetic actuators in vitro and in vivo. We demonstrate this cell-type-targeting magnetic approach for remote and spatiotemporal precise control of deep brain neural activity in multiple behavioural models, such as bidirectional feeding control, long-term neuromodulation for weight control in obese mice and wireless modulation of social behaviours in multiple mice in the same physical space. Our study demonstrates the potential of cell-type-specific magnetogenetics as an effective and reliable research tool for life sciences, especially in wireless, long-term and freely behaving animals.

Enhancing scanning accuracy of digital implant scans: A systematic review on application methods of scan bodies.

STATEMENT OF PROBLEM: Scan bodies play a crucial role in the accuracy of digital implant scans by serving as implant-positioning transfer devices. Previous literature has demonstrated the effects of scan body characteristics on the accuracy of digital implant scans. However, the optimal application methods of scan bodies to enhance scanning accuracy remain unclear. PURPOSE: The purpose of this systematic review was to determine the optimal application methods of scan bodies to enhance the accuracy of digital implant scans. MATERIAL AND METHODS: An electronic search was conducted by using the PubMed (MEDLINE), Web of Science, Cochrane Library, and Embase databases from November 2018 to 2023. Relevant references from the included studies were further screened manually for eligibility. Following the population, intervention, comparison, and outcome (PICO) criteria, a research question focused on identifying the optimal application method for effectively using scan bodies to enhance scanning accuracy was developed. Specific inclusion criteria involved in vitro and in vivo studies. The Checklist for Reporting In Vitro Studies (CRIS) guidelines were followed and the assessment of the risk of bias in the included studies was conducted. RESULTS: Sixteen articles that met the eligibility criteria were included in this systematic review. Two studies investigated the effect of scan body bevel orientation on the accuracy of digital implant scans, and 3 examined the impact of tightening torque on scan bodies. Among the studies focusing on completely edentulous arches, 5 recommended the use of auxiliary geometric devices on the dental arch to enhance scanning accuracy. However, 2 studies reported no improvements in accuracy after splinting scan bodies with thread. CONCLUSIONS: Different techniques for applying scan bodies, such as configuring bevel orientation, adjusting tightening torque, and attaching auxiliary geometric devices, influence the accuracy of digital implant scans. For scanning completely edentulous arches, attaching auxiliary devices to scan bodies to cover the edentulous ridge effectively enhances scanning accuracy.

Real-World Effectiveness of Biologics in Patients With Severe Asthma: Analysis of the KoSAR.

PURPOSE: Severe asthma is associated with high morbidity and healthcare utilization; however, treatment options for these patients are limited. This study aimed to determine the therapeutic effects of biologics in clinical practice. METHODS: This multicenter, retrospective cohort study included 136 patients who received biologics for at least 4 months between September 2017 and July 2022 at 25 medical centers affiliated with the Korean Severe Asthma Registry (KoSAR). The study evaluated the treatment effects, including acute exacerbation rates, maintenance of oral corticosteroid dosages, lung function, quality of life, blood eosinophil count, and fractional exhaled nitric oxide (FeNO) levels, by comparing measurements before and after 4 months of biologic treatment. Responses for each medication was evaluated based on the Global Evaluation of Treatment Effectiveness score, and any adverse reactions were summarized. RESULTS: With the administration of biologics over the course of 4 months, there was a reduction in asthma acute exacerbations, a significant improvement in lung function, and a significant decrease in daily maintenance dose of oral steroid. Blood eosinophil counts decreased in the mepolizumab and reslizumab groups, while FeNO levels decreased only in the dupilumab group. The Asthma Control Test, Quality of Life Questionnaire for Adult Korean Asthmatics, and the EuroQol-visual analogue scale scores showed a significant improvement. Most patients (80.15%) responded to the biologic treatment. Meanwhile, non-responders often had chronic rhinosinusitis as a comorbidity, exhibited lower lung function, and required higher doses of oral steroids. No severe adverse events were reported. CONCLUSIONS: Biologics are highly effective in Korean patients with Type 2 severe asthma, significantly reducing acute exacerbation rates and doses of oral corticosteroids, while also improving lung function. Therefore, it seems beneficial to administer biologics without any restrictions to patients exhibiting Type 2 severe asthma.

Serum MRGPRX2 as a Long-term Biomarker for Iodinated Contrast Media-Induced Anaphylaxis.

The diagnosis of anaphylaxis is based on the clinical history. The utility of tryptase measurements in clinical setting is limited. Mas-related G protein-coupled receptor-X2 (MRGPRX2) is expressed in mast cells and is involved in the degranulation of these cells. We evaluated the potential of MRGPRX2 as a diagnostic biomarker in patients with iodinated contrast media (ICM)-induced immediate hypersensitivity reactions (IHRs). A total of 173 patients with documented ICM-induced IHR within 4 months from registration were enrolled and skin tests for the culprit ICM were performed. The time interval was evaluated as the duration between the onset of ICM-induced IHR and the measurement of serum MRGPRX2 levels. Serum MRGPRX2 concentration was determined using an enzyme-linked immunosorbent assay kit. Of the 173 patients, 33 and 140 were included in the anaphylaxis and non-anaphylaxis groups, respectively. Serum MRGPRX2 levels were significantly higher in the anaphylaxis than in the non-anaphylaxis group (29.9 ± 24.1 vs. 20.7±17.5, P = 0.044). Serum MRGPRX2 showed a moderate predictive ability for anaphylaxis, with an area under the curve of 0.61 (P = 0.058). When groups were classified based on the time interval, T1(0-2months) and T2 (2-4months), patients with anaphylaxis had higher MRGPRX2 levels compared to the non-anaphylaxis group in the T2 group (36.5±19.2 vs. 20.5±19.0, P = 0.035). This pilot study shows that serum MRGPRX2 is a potential long-term biomarker for predicting anaphylaxis, particularly ICM-induced anaphylaxis. Further studies are needed to determine the role of MRGPRX2 in anaphylaxis in a larger population of patients with various drug-induced IHRs.

Prescription patterns and effectiveness of medications for chronic obstructive pulmonary disease: A retrospective study of real-world settings.

This study aimed to define real-world prescription patterns in Korea and compare the effectiveness of chronic obstructive pulmonary disease (COPD) medications. We used national claims data provided by the Health Insurance Review and Assessment Service in Korea and examined patients who were first diagnosed with COPD and started treatment between May 1, 2017, and April 30, 2018, with no change in drug regimen. Among 30,784 patients with COPD, long-acting ß2 agonist (LABA) combined with long-acting muscarinic antagonist (LAMA) (32.7%), inhaled corticosteroid-LABA (ICS-LABA) (25.6%), LAMA (18.3%), ICS (5.8%), or LABA (4.6%) were prescribed as the first-choice inhalers. The use of LABA-LAMA (hazard ratio [HR], 0.248-0.584), LAMA (HR, 0.320-0.641), ICS-LABA (HR, 0.325-0.643), and xanthine (HR, 0.563-0.828) significantly reduced the total and severe exacerbation rates compared with no use of each medication. However, the use of ICS or LABA individually did not yield such effects. The continued use of LABA-LAMA, LAMA, and ICS-LABA showed a significant effect on exacerbation rate, whereas the long-term use of ICS, LABA, and xanthine did not. Moreover, some high doses of ICS-LABA did not show significant effects. This real-world study revealed that LAMA and/or LABA could be the first choice of therapy, as recommended by recent guidelines. However, ICS, xanthine, and high-dose ICS-LABA are still being prescribed frequently as first-line drugs in Korea.

Edema of the upper extremity on the unaffected side in unilateral breast cancer patients.

Breast cancer-related lymphedema (BCRL) occurs usually on the affected side, and its cause and pathophysiology are well known. However, the cause of edema of the upper extremity on the unaffected side is barely known. It is often considered to be chemotherapy-induced general edema, and clinical evaluation is rarely performed in these patients. This study aimed to present the clinical characteristics of unilateral breast cancer patients with edema of upper extremity on the unaffected side, and to emphasize the importance of early diagnosis and medical interventions. This study retrospectively analyzed the medical records of unilateral breast cancer patients complaining edema of upper extremity on the unaffected side, from January 2020 to May 2021. Lymphoscintigraphy was used to assist in confirming the diagnosis of lymphedema, and Doppler ultrasonography or 3D computed tomography angiography were performed to differentiate vascular problems. Fourteen patients were enrolled in the study. Seven, 3, and 4 patients had edema of both upper extremities, edema of the upper extremity on the unaffected side only, and edema of all extremities, respectively. None of the 4 patients with edema of all extremities showed abnormal findings on examination. In patients with edema in the upper extremity on the unaffected side alone, lymphatic flow dysfunction was seen in 2 patients, and deep vein thrombosis (DVT) was diagnosed in 1. In patients with edema of both upper extremities, lymphatic flow dysfunction was seen in 2 patients, and DVT was diagnosed in 3. One patient had DVT and accompanying lymphatic flow dysfunction. Lymphedema and DVT were diagnosed in a number of patients with edema of the upper extremity on the unaffected side, and lymphedema can occur without direct injury to the lymphatic flow system. Therefore, clinicians should not overlook the fact that diseases that require early diagnosis and treatment can occur in patients with edema of the unaffected upper extremity.

Anomalous spectral shift of localized surface plasmon resonance.

We report the first observation of spectral blue shift of plasmon resonance of synthesized silver nanoparticles (AgNPs) due to a negative optical nonlinearity of a local ambient medium, i.e., indigo carmine (IC) solution at around 420 nm wavelength. The blue shift occurred at a larger concentration of AgNPs or at a larger concentration of IC solution, being in obvious contrast to spectral red shift which was widely witnessed in plasmon spectral shift in a linear regime. Plasmon-enhanced local fields could excite the third-order optical nonlinearity for blue shift even under continuous (non-pulsed) light illumination. We also found that the plasmon-excited nonlinearity could allow for differential nonlinear response of the IC solution to be even greater than its differential linear response, though appearing to be somewhat inconsistent with what was generally known in light-matter interaction. The demonstrated properties of such anomalous shift of plasmon spectral peaks and its accompanying properties indicated that plasmon technologies could be exploited not only in linear but also in nonlinear aspects for critical optimization in plasmon-energy harvesting systems such as in surface enhanced spectroscopy/microscopy, biomedical imaging/sensing, laser frequency conversion, ultrashort pulse generation, and all-optical switching.

Self-Assembled Origami Neural Probes for Scalable, Multifunctional, Three-Dimensional Neural Interface.

Flexible intracortical neural probes have drawn attention for their enhanced longevity in high-resolution neural recordings due to reduced tissue reaction. However, the conventional monolithic fabrication approach has met significant challenges in: (i) scaling the number of recording sites for electrophysiology; (ii) integrating of other physiological sensing and modulation; and (iii) configuring into three-dimensional (3D) shapes for multi-sided electrode arrays. We report an innovative self-assembly technology that allows for implementing flexible origami neural probes as an effective alternative to overcome these challenges. By using magnetic-field-assisted hybrid self-assembly, multiple probes with various modalities can be stacked on top of each other with precise alignment. Using this approach, we demonstrated a multifunctional device with scalable high-density recording sites, dopamine sensors and a temperature sensor integrated on a single flexible probe. Simultaneous large-scale, high-spatial-resolution electrophysiology was demonstrated along with local temperature sensing and dopamine concentration monitoring. A high-density 3D origami probe was assembled by wrapping planar probes around a thin fiber in a diameter of 80∼105 µm using optimal foldable design and capillary force. Directional optogenetic modulation could be achieved with illumination from the neuron-sized micro-LEDs (µLEDs) integrated on the surface of 3D origami probes. We could identify angular heterogeneous single-unit signals and neural connectivity 360° surrounding the probe. The probe longevity was validated by chronic recordings of 64-channel stacked probes in behaving mice for up to 140 days. With the modular, customizable assembly technologies presented, we demonstrated a novel and highly flexible solution to accommodate multifunctional integration, channel scaling, and 3D array configuration.

Statin administration or blocking PCSK9 alleviates airway hyperresponsiveness and lung fibrosis in high-fat diet-induced obese mice.

BACKGROUND: Obesity is associated with airway hyperresponsiveness and lung fibrosis, which may reduce the effectiveness of standard asthma treatment in individuals suffering from both conditions. Statins and proprotein convertase subtilisin/kexin-9 inhibitors not only reduce serum cholesterol, free fatty acids but also diminish renin-angiotensin system activity and exhibit anti-inflammatory effects. These mechanisms may play a role in mitigating lung pathologies associated with obesity. METHODS: Male C57BL/6 mice were induced to develop obesity through high-fat diet for 16 weeks. Conditional TGF-ß1 transgenic mice were fed a normal diet. These mice were given either atorvastatin or proprotein convertase subtilisin/kexin-9 inhibitor (alirocumab), and the impact on airway hyperresponsiveness and lung pathologies was assessed. RESULTS: High-fat diet-induced obesity enhanced airway hyperresponsiveness, lung fibrosis, macrophages in bronchoalveolar lavage fluid, and pro-inflammatory mediators in the lung. These lipid-lowering agents attenuated airway hyperresponsiveness, macrophages in BALF, lung fibrosis, serum leptin, free fatty acids, TGF-ß1, IL-1ß, IL-6, and IL-17a in the lung. Furthermore, the increased RAS, NLRP3 inflammasome, and cholecystokinin in lung tissue of obese mice were reduced with statin or alirocumab. These agents also suppressed the pro-inflammatory immune responses and lung fibrosis in TGF-ß1 over-expressed transgenic mice with normal diet. CONCLUSIONS: Lipid-lowering treatment has the potential to alleviate obesity-induced airway hyperresponsiveness and lung fibrosis by inhibiting the NLRP3 inflammasome, RAS and cholecystokinin activity.

Nondestructive Single-Atom-Thick Crystallographic Scanner via Sticky-Note-Like van der Waals Assembling-Disassembling.

Crystallographic characteristics, including grain boundaries and crystallographic orientation of each grain, are crucial in defining the properties of two-dimensional materials (2DMs). To date, local microstructure analysis of 2DMs, which requires destructive and complex processes, is primarily used to identify unknown 2DM specimens, hindering the subsequent use of characterized samples. Here, a nondestructive large-area 2D crystallographic analytical method through sticky-note-like van der Waals (vdW) assembling-disassembling is presented. By the vdW assembling of veiled polycrystalline graphene (PCG) with a single-atom-thick single-crystalline graphene filter (SCG-filter), detailed crystallographic information of each grain in PCGs is visualized through a 2D Raman signal scan, which relies on the interlayer twist angle. The scanned PCGs are seamlessly separated from the SCG-filter using vdW disassembling, preserving their original condition. The remaining SCG-filter is then reused for additional crystallographic scans of other PCGs. It is believed that the methods can pave the way for advances in the crystallographic analysis of single-atom-thick materials, offering huge implications for the applications of 2DMs.

Relationship between cervical lordotic angle and cervical segmental motion during craniocervical flexion test: A cross-sectional study.

The craniocervical flexion test (CCFT) is commonly used for assessing the performance and function of the deep cervical flexor muscles; however, objective measurements of cervical segmental motion during craniocervical flexion (CCF) are lacking. Therefore, the purpose of this study aimed to investigate cervical segmental motions during CCFT and determine the relationship between changes of cervical segmental motions and the cervical lordotic angle. A cross-sectional study of prospectively collected data. Twenty healthy participants without neck pain underwent standing cervical radiography (lateral view) to measure the cervical lordotic angle, followed by radiography in supine position during the CCFT. The occipito-atlantal (OA) joint angle, atlantoaxial (AA) joint angle, and cervical spinous process posterior displacement (CSPPD) of the C1-C6 vertebrae were measured using lateral cervical radiographs taken during the initial (20 mm Hg) and low-stage (24 mm Hg) CCFT conditions. The CCF motion during the low-stage CCFT was characterized by a significantly increased OA joint angle, decreased AA joint angle, and increased C1-C6 CSPPD compared with the initial stage (P < .05). The change in the value of C1-C6 CSPPD at low-stage CCFT showed a significant positive correlation with the cervical lordotic angle. These results indicate that the cervical lordotic angle is important in minimizing CSPPD and performing appropriately-isolated CCF motion during CCFT.

High energy density in artificial heterostructures through relaxation time modulation.

Electrostatic capacitors are foundational components of advanced electronics and high-power electrical systems owing to their ultrafast charging-discharging capability. Ferroelectric materials offer high maximum polarization, but high remnant polarization has hindered their effective deployment in energy storage applications. Previous methodologies have encountered problems because of the deteriorated crystallinity of the ferroelectric materials. We introduce an approach to control the relaxation time using two-dimensional (2D) materials while minimizing energy loss by using 2D/3D/2D heterostructures and preserving the crystallinity of ferroelectric 3D materials. Using this approach, we were able to achieve an energy density of 191.7 joules per cubic centimeter with an efficiency greater than 90%. This precise control over relaxation time holds promise for a wide array of applications and has the potential to accelerate the development of highly efficient energy storage systems.

A method for selecting the optimal warping path of dynamic time warping in gait analysis.

This study aims to demonstrate that when performing dynamic time warping (DTW) on gait data, multiple optimal warping paths (OWPs) with a minimum sum of local costs can occur and to propose an additional OWP selection method to address this problem. A 3-dimensional motion analysis experiment was conducted on 55 adult participants, including both males and females, to acquire gait data. This study analyzed 990 instances of DTW on gait data to examine the occurrence of multiple OWPs with the minimum sum of local costs. We subsequently applied an additional selection method to the multiple OWPs to determine the feasibility of identifying a single OWP. Multiple OWPs through DTW were observed 82 times, accounting for 8.28%. Notably, on the ankle joint of males, the rate was the highest at 11.11%. Cases with two multiple OWPs were the most prevalent at 56.10%, and cases with ten or more multiple OWPs accounted for 19.51%. The additional selection method proposed in this study was applied to the 82 instances in which multiple OWPs occurred. The results demonstrated the ability to identify a unique OWP in all cases. These results hold significance in identifying the shortcomings of conventional OWP selection methods previously employed and proposing solutions. It enhances the reliability, validity, and accuracy of studies utilizing DTW.

Angiotensin Receptor Blockers and the Risk of Suspected Drug-Induced Liver Injury: A Retrospective Cohort Study Using Electronic Health Record-Based Common Data Model in South Korea.

INTRODUCTION: Angiotensin receptor blockers are widely used antihypertensive drugs in South Korea. In 2021, the Korea Ministry of Food and Drug Safety acknowledged the need for national compensation for a drug-induced liver injury (DILI) after azilsartan use. However, little is known regarding the association between angiotensin receptor blockers and DILI. OBJECTIVE: We conducted a retrospective cohort study in incident users of angiotensin receptor blockers from a common data model database (1 January, 2017-31 December, 2021) to compare the risk of DILI among specific angiotensin receptor blockers against valsartan. METHODS: Patients were assigned to treatment groups at cohort entry based on prescribed angiotensin receptor blockers. Drug-induced liver injury was operationally defined using the International DILI Expert Working Group criteria. Cox regression analyses were conducted to derive hazard ratios and the inverse probability of treatment weighting method was applied. All analyses were performed using R. RESULTS: In total, 229,881 angiotensin receptor blocker users from 20 university hospitals were included. Crude DILI incidence ranged from 15.6 to 82.8 per 1000 person-years in treatment groups, most were cholestatic and of mild severity. Overall, the risk of DILI was significantly lower in olmesartan users than in valsartan users (hazard ratio: 0.73 [95% confidence interval 0.55-0.96]). In monotherapy patients, the risk was significantly higher in azilsartan users than in valsartan users (hazard ratio: 6.55 [95% confidence interval 5.28-8.12]). CONCLUSIONS: We found a significantly higher risk of suspected DILI in patients receiving azilsartan monotherapy compared with valsartan monotherapy. Our findings emphasize the utility of real-world evidence in advancing our understanding of adverse drug reactions in clinical practice.

Influence of crown shade, translucency, and scan powder application on the trueness of intraoral scanners.

OBJECTIVES: Natural teeth and dental restorations present with various shades and levels of translucency. This study aimed to determine whether these variations in ceramic crowns and scan powder application affect the trueness of intraoral scanners. METHODS: Eight identical premade resin typodonts, each prepared for a crown on the maxillary right second molar, were used. Eight lithium disilicate crowns, distinguished by two levels of translucency (high and low) and four shades (BL1, A2, A3, and A4), were fabricated to an identical design and cemented onto each typodont, providing eight distinct experimental groups (2 levels of translucency × 4 shades). Reference scans were acquired using a desktop scanner. Test scans were performed ten times for each experimental group using two different intraoral scanners (Medit i700 and CEREC Primescan AC), with and without the application of scan powder (n = 10). Three-dimensional metrology software was used to assess the trueness of the intraoral scan datasets. Statistical analysis involved the Kruskal-Wallis H test, Mann-Whitney U test, and independent t-test (α=0.05). RESULTS: For powder-free intraoral scan datasets, the crown shade did not significantly affect trueness within each translucency group (P = 1.000). For both intraoral scanners, compared with low translucency groups, higher marked deviations were exhibited by high translucency groups (P<.001). Scan powder use largely mitigated these differences (P>.05) and enhanced the trueness of the intraoral scan (P<.01). CONCLUSIONS: Shade did not significantly influence the trueness of intraoral scans. High-translucency crowns were scanned with less accuracy than were low-translucency crowns. CLINICAL SIGNIFICANCE: Unlike tooth shade, translucency significantly affected the accuracy of intraoral scans. Therefore, considering the use of scan powder when scanning objects with high translucency may be beneficial.

Wear Resistance of Additively Manufactured Resin with Different Printing Parameters and Postpolymerization Conditions.

PURPOSE: To evaluate the wear resistance of a printed interim resin manufactured with different printing and postpolymerization parameters. MATERIALS AND METHODS: Overall, 130 rectangular resin specimens (15 × 10 × 10 mm) were 3D-printed. Among the specimens, 60 were printed with different printing orientations (0, 45, and 90 degrees) and layer thicknesses (50 and 100 µm) to create six groups to investigate the effects of the printing parameters (n = 10 per group). The remaining 70 specimens were used to evaluate the effects of postpolymerization; for this, seven groups were created as follows (n = 10 per group): nonpostpolymerized; postpolymerized for 5, 15, and 30 minutes with an ultraviolet light-emitting diode (LED) device; and postpolymerized for 5, 15, and 30 minutes with an ultraviolet light bulb device. After masticatory simulation, the wear volume loss was calculated with 3D metrology software. One-way and two-way ANOVA were used for intergroup comparisons (α = .05). RESULTS: The group printed with a build angle of 45 degrees showed lower wear volume loss than the 0- and 90-degree groups (P < .01). The wear volume loss in the ultraviolet LED group was significantly greater than that in the ultraviolet light bulb group (P = .04). No significant difference was observed in the wear volume loss of the printed resin with respect to the layer thickness and polymerization time (P > .05). However, the non-postpolymerized group showed significantly greater wear volume loss than the other groups (P < .001). CONCLUSIONS: The printed resin showed greater wear resistance when it was printed at a build angle of 45 degrees and postpolymerized with an ultraviolet light bulb device.

Float-stacked graphene-PMMA laminate.

Semi-infinite single-atom-thick graphene is an ideal reinforcing material that can simultaneously improve the mechanical, electrical, and thermal properties of matrix. Here, we present a float-stacking strategy to accurately align the monolayer graphene reinforcement in polymer matrix. We float graphene-poly(methylmethacrylate) (PMMA) membrane (GPM) at the water-air interface, and wind-up layer-by-layer by roller. During the stacking process, the inherent water meniscus continuously induces web tension of the GPM, suppressing wrinkle and folding generation. Moreover, rolling-up and hot-rolling mill process above the glass transition temperature of PMMA induces conformal contact between each layer. This allows for pre-tension of the composite, maximizing its reinforcing efficiency. The number and spacing of the embedded graphene fillers are precisely controlled. Notably, we accurately align 100 layers of monolayer graphene in a PMMA matrix with the same intervals to achieve a specific strength of about 118.5 MPa g-1 cm3, which is higher than that of lightweight Al alloy, and a thermal conductivity of about 4.00 W m-1 K-1, which is increased by about 2,000 %, compared to the PMMA film.

In-vivo integration of soft neural probes through high-resolution printing of liquid electronics on the cranium.

Current soft neural probes are still operated by bulky, rigid electronics mounted to a body, which deteriorate the integrity of the device to biological systems and restrict the free behavior of a subject. We report a soft, conformable neural interface system that can monitor the single-unit activities of neurons with long-term stability. The system implements soft neural probes in the brain, and their subsidiary electronics which are directly printed on the cranial surface. The high-resolution printing of liquid metals forms soft neural probes with a cellular-scale diameter and adaptable lengths. Also, the printing of liquid metal-based circuits and interconnections along the curvature of the cranium enables the conformal integration of electronics to the body, and the cranial circuit delivers neural signals to a smartphone wirelessly. In the in-vivo studies using mice, the system demonstrates long-term recording (33 weeks) of neural activities in arbitrary brain regions. In T-maze behavioral tests, the system shows the behavior-induced activation of neurons in multiple brain regions.