In vivo experimental study comparing alveolar ridge preservation versus guided bone regeneration after unassisted socket healing at intact and damaged sites in narrow alveolar ridges.

BACKGROUND: To compare bone regeneration and dimensional alteration of alveolar ridge at intact and damaged extraction sockets after alveolar ridge preservation (ARP) and implant placement versus unassisted socket healing followed by guided bone regeneration (GBR) with simultaneous implant placement. METHODS: In 6 beagle dogs, 3 types of extraction sockets in the mandible were created: (1) intact sockets, (2) 1-wall defect sockets and (3) 2-wall defect sockets. The sockets were allocated to undergo either (1) ARP and implant placement 8 weeks later (ARP group) or (2) GBR with simultaneous implant placement after 8 weeks of unassisted socket healing (GBR group). After an additional healing period of 8 weeks, bone regeneration and dimensional changes were evaluated radiographically and histologically. RESULTS: GBR showed superior bone formation and greater bone gains compared to ARP, regardless of the initial extraction-socket configuration. Although ARP maintained the preexisting alveolar ridge dimensions, peri-implant bone defects were still detected at 8 weeks of follow-up. Histomorphometric analyses confirmed that GBR increased dimensions of the alveolar ridge compared to baseline, and the augmentation and bone regeneration were greater with GBR than with ARP. CONCLUSION: Early implant placement with ARP can mitigate alveolar ridge changes in the narrow alveolar ridge. However, early implant placement with simultaneous GBR creates the conditions for enhanced bone regeneration around the implant and greater ridge augmentation compared to ARP, irrespective of the extraction-socket configuration.

The Economic Burden of Non-Typhoidal Salmonella and Invasive Non-Typhoidal Salmonella Infection: A Systematic Literature Review.

Non-typhoidal Salmonella (NTS) infection and invasive non-typhoidal Salmonella (iNTS) infection cause a significant global health and economic burden. This systematic review aims to investigate the reported economic burden of NTS and iNTS infection, identify research gaps, and suggest future research directions. Data from PubMed and Embase databases up to April 2022 were reviewed, and articles were screened based on predefined criteria. Cost data were extracted, categorized into direct medical costs (DMCs), direct non-medical costs (DNMCs), and indirect costs (ICs), and converted into US dollars (year 2022). Data primarily originated from high-income countries (37 out of 38), with limited representation from Africa and resource-limited settings. For inpatients, DMCs were the primary cost driver for both NTS and iNTS illnesses, with estimates ranging from USD 545.9 (Taiwan, a region of China) to USD 21,179.8 (Türkiye) for NTS and from USD 1973.1 (Taiwan, a region of China) to USD 32,507.5 (United States of America) for iNTS per case. DNMCs and ICs varied widely across studies. Although study quality improved over time, methodological differences persisted. This review underscores the lack of economic data on NTS and iNTS in resource-limited settings. It also highlights the need for economic burden data in resource-limited settings and a standardized approach to generate global datasets, which is critical for informing policy decisions, especially regarding future vaccines.

Enhancing guided bone regeneration with cross-linked collagen-conjugated xenogeneic bone blocks and membrane fixation: A preclinical in vivo study.

OBJECTIVE: To determine whether combining cross-linked (CL) collagen-integrated xenogeneic bone blocks stabilized with the fixation of resorbable collagen membranes (CM) can enhance guided bone regeneration (GBR) in the overaugmented calvarial defect model. MATERIALS AND METHODS: Four circular defects with a diameter of 8 mm were prepared in the calvarium of 13 rabbits. Defects were randomly assigned to receive one of the following treatments: (i) non-cross-linked (NCL) porcine-derived collagen-embedded bone block covered by a CM without fixation (NCL + unfix group); (ii) NCL bone block covered by CM with fixation using bone-tack (NCL + fix group); (iii) cross-linked (CL) porcine-derived collagen-embedded bone block covered by CM without fixation (CL + unfix group); and (iv) CL bone block covered by CM with fixation using bone-tack fixation (CL + fix group). The efficacy of GBR was assessed through histological and molecular analyses after 2 and 8 weeks. RESULTS: At 2 weeks, there were no significant differences in histologically measured areas of newly formed bone among the groups. At 8 weeks, however, the CL + fix group exhibited a larger area of new bone (5.08 ± 1.09 mm2, mean ± standard deviation) compared to the NCL + unfix (1.62 ± 0.42 mm2; p < .0083), NCL + fix (3.97 ± 1.39 mm2) and CL + unfix (2.55 ± 1.04 mm2) groups. Additionally, the expression levels of tumour necrosis factor-alpha, fibroblast growth factor-2, vascular endothelial growth factor, osteocalcin and calcitonin receptor were significantly higher in the CL + fix group compared to the other three groups (p < .0083). CONCLUSION: Cross-linked bone blocks stabilized with collagen membrane fixation can significantly enhance GBR.

Synchrotron Analysis of Damaged Extraction Sockets Augmented Using a Synthetic Bone Block: A Pilot Study.

This study aimed to investigate the dimensional stability and quality of the alveolar ridge augmented using a synthetic bone block (SBB) at damaged extraction sockets. Four participants were included, and socket augmentation was performed using SBB and a collagen membrane. Intraoral and CBCT scans were performed before extraction (baseline), immediately postoperative (IP), and at 6 months postoperative (6M). At 6M, a trephine biopsy sample was obtained during implant placement, and the sample was observed using synchrotron. Soft tissue profile changes were assessed using profilometric analysis of the intraoral scan data, while dimensional changes in hard tissue were evaluated based on CBCT measurements. Bone quality was analyzed using synchrotron imaging. There were minimal changes in the soft tissue profile between baseline and IP, baseline and 6M, and IP and 6M (0.11 ± 1.08 mm3, 0.02 ± 0.8 mm3, and -0.65 ± 0.82 mm3, respectively). Horizontal bone width was measured at 1-mm increments from the augmented bone crest to 5 mm apically and revealed only a slight reduction (< 1 mm) at all levels between IP and 6M. The augmented bone height was well maintained from IP until 6M (-0.21 ± 0.53 mm). Synchrotron analysis revealed low to moderate bone quality after 6M (percentage of new bone: 16.49% ± 4.91%). Socket augmentation using SBB appears to be a viable technique for regenerating damaged extraction sockets, with the augmented ridge dimensions maintained up to 6M. Further long-term randomized clinical trials are needed.

Ultra-Wideband Vertical Transition in Coplanar Stripline for Ultra-High-Speed Digital Interfaces.

A design method for an ultra-wideband coplanar-stripline-based vertical transition that can be used for ultra-high-speed digital interfaces is proposed. A conventional via structure, based on a differential line (DL), inherently possesses performance limitations (<10 GHz) due to difficulties in maintaining constant line impedance and smooth electric field transformation, in addition to the effects of signal skews, FR4 fiber weave, and unbalanced EM interferences. DL-based digital interfaces may not meet the demands of ultra-high-speed digital data transmission required for the upcoming 6G communications. The use of a coplanar stripline (CPS), a type of planar balanced line (BL), for the vertical transition, along with the ultra-wideband DL-to-CPS transition, mostly removes the inherent and unfavorable issues of the DL and enables ultra-high-speed digital data transmission. The design process of the transition is simplified using the analytical design formulas, derived using the conformal mapping method, of the transition. The characteristic line impedances of the transition are calculated and found to be in close agreement with the results obtained from EM simulations. Utilizing these results, the CPS-based vertical transition, maintaining the characteristic line impedance of 100 Ω, is designed and fabricated. The measured results confirm its ultra-wideband characteristics, with a maximum of 1.6 dB insertion loss and more than 10 dB return loss in the frequency range of DC to 30 GHz. Therefore, the proposed CPS-based vertical transition offers a significantly wider frequency bandwidth, i.e., more than three times that of conventional DL-based via structures.

The distance of insertion points from wound margins in interrupted and vertical mattress sutures influences the tensile load capacity: An in vitro experimental study.

AIM: To determine the tensile load capacity (TLC) and the tearing characteristics for interrupted and vertical mattress sutures with different insertion points from the wound margin, and the effect of the bite size when using vertical mattress sutures. MATERIALS AND METHODS: A total of 120 gingiva and lining mucosa samples obtained from pig jaws were divided into groups according to the suturing technique (interrupted and vertical mattress sutures), distance of the insertion points from the wound margin (margin, 1, 3, and 5 mm) and bite size (1, 3, and 5 mm). The TLC of the suture and the tearing characteristics were evaluated using a tensile tester device. RESULTS: The TLC was significantly higher for vertical mattress sutures than for interrupted sutures regardless of the distance of the insertion points from the wound margin (intergroup p < .001). This distance significantly influenced the TLC for vertical mattress sutures (p < .05) but not for interrupted sutures (p > .05). Testing the tearing characteristics revealed that no tissue tearing occurred in groups when the insertion points were more than 3 mm from the wound margin. CONCLUSION: The TLC is higher for vertical mattress sutures than for interrupted sutures, and it increases when the insertion points are farther from the wound margin.

Immediate loading on two adjacent single dental implants with definitive nonsplinted restorations: A proof of concept in the posterior zone.

OBJECTIVES: To evaluate clinical, clinician- and patient-reported outcomes (PROs) of two adjacent single posterior implants immediately loaded with definitive single crowns up to 1 year. Ten patients in need of two adjacent posterior single implants were included. All implants were placed applying a fully digital workflow. Definitive screw-retained single zirconia crowns were delivered within 72 h after implant placement. Clinical parameters, patient- and clinician-reported outcomes were assessed up to 1 year of follow-up. CLINICAL CONSIDERATIONS: Clinical outcomes remained stable, with no implant failures or technical and biological complications throughout the observation period. Patient satisfaction was very high at baseline (crown delivery) and remained consistently high at 6 and 12 months of follow-up. Crown insertion 3 days after implant placement was rated as an easy procedure by clinicians. CONCLUSIONS: Two adjacent single implants with immediate definitive restorations (<72 h) in the posterior region appear to be a viable and easy treatment option to shorten the overall treatment time and potentially enhancing patient satisfaction. However, randomized controlled trials are needed to confirm the advantages of this treatment protocol over a delayed loading approach. CLINICAL SIGNIFICANCE: In selected cases, immediate implant loading with definitive restorations in the posterior region appears a valuable and straightforward option to shorten the overall treatment time.

Risk of post-operative bleeding after dentoalveolar surgery in patients taking anticoagulants: a cohort study using the common data model.

This retrospective study aimed to determine risk factors associated with post-operative bleeding after dentoalveolar surgery in patients taking anticoagulants. Patients taking anticoagulants who were planned to undergo periodontal flap operation, tooth extraction or implant surgery were included. Patients were divided into two subgroups according to the maintenance of anticoagulants following medical consultation: (1) maintenance group and (2) discontinuation group. The analysed patient-related factors included systemic diseases, maintenance of anticoagulants and types of anticoagulant. Intra- and post-operative treatment-related factors, haemostatic methods and post-operative bleeding were collected for statistical analyses. There were 35 post-operative bleeding complications (6.5%) in the 537 included patients: 21 (8.6%) in maintenance group and 14 (4.8%) in discontinuation group. The type of anticoagulant (p = 0.037), tooth extraction combined with bone grafting (p = 0.016) and type of implant surgery (p = 0.032) were significantly related to the post-operative bleeding rate. In the maintenance group, atrial fibrillation [odds ratio (OR) = 6.051] and vitamin K inhibitors (OR = 3.679) were associated with a significantly higher bleeding risk. From this result, it can be inferred that the decision to continue anticoagulants should be made carefully based on the types of anticoagulant and the characteristics of dentoalveolar surgeries performed: extraction with bone grafting, multiple implantations and involvement of maxillary arch.

The Full Value of Vaccine Assessments Concept-Current Opportunities and Recommendations.

For vaccine development and adoption decisions, the 'Full Value of Vaccine Assessment' (FVVA) framework has been proposed by the WHO to expand the range of evidence available to support the prioritization of candidate vaccines for investment and eventual uptake by low- and middle-income countries. Recent applications of the FVVA framework have already shown benefits. Building on the success of these applications, we see important new opportunities to maximize the future utility of FVVAs to country and global stakeholders and provide a proof-of-concept for analyses in other areas of disease control and prevention. These opportunities include the following: (1) FVVA producers should aim to create evidence that explicitly meets the needs of multiple key FVVA consumers, (2) the WHO and other key stakeholders should develop standardized methodologies for FVVAs, as well as guidance for how different stakeholders can explicitly reflect their values within the FVVA framework, and (3) the WHO should convene experts to further develop and prioritize the research agenda for outcomes and benefits relevant to the FVVA and elucidate methodological approaches and opportunities for standardization not only for less well-established benefits, but also for any relevant research gaps. We encourage FVVA stakeholders to engage with these opportunities.

State transitions across the Strep A disease spectrum: scoping review and evidence gaps.

The spectrum of diseases caused by Streptococcus pyogenes (Strep A) ranges from superficial to serious life-threatening invasive infections. We conducted a scoping review of published articles between 1980 and 2021 to synthesize evidence of state transitions across the Strep A disease spectrum. We identified 175 articles reporting 262 distinct observations of Strep A disease state transitions. Among the included articles, the transition from an invasive or toxin-mediated disease state to another disease state (i.e., to recurrent ARF, RHD or death) was described 115 times (43.9% of all included transition pairs) while the transition to and from locally invasive category was the lowest (n = 7; 0.02%). Transitions from well to any other state was most frequently reported (49%) whereas a relatively higher number of studies (n = 71) reported transition from invasive disease to death. Transitions from any disease state to locally invasive, Strep A pharyngitis to invasive disease, and chronic kidney disease to death were lacking. Transitions related to severe invasive diseases were more frequently reported than superficial ones. Most evidence originated from high-income countries and there is a critical need for new studies in low- and middle-income countries to infer the state transitions across the Strep A disease spectrum in these high-burden settings.

Vaccination to Reduce Antimicrobial Resistance Burden-Data Gaps and Future Research.

Antimicrobial resistance (AMR) poses an immediate danger to global health. If unaddressed, the current upsurge in AMR threatens to reverse the achievements in reducing the infectious disease-associated mortality and morbidity associated with antimicrobial treatment. Consequently, there is an urgent need for strategies to prevent or slow the progress of AMR. Vaccines potentially contribute both directly and indirectly to combating AMR. Modeling studies have indicated significant gains from vaccination in reducing AMR burdens for specific pathogens, reducing mortality/morbidity, and economic loss. However, quantifying the real impact of vaccines in these reductions is challenging because many of the study designs used to evaluate the contribution of vaccination programs are affected by significant background confounding, and potential selection and information bias. Here, we discuss challenges in assessing vaccine impact to reduce AMR burdens and suggest potential approaches for vaccine impact evaluation nested in vaccine trials.

The potential global cost-effectiveness of prospective Strep A vaccines and associated implementation efforts.

Group A Streptococcus causes a wide range of diseases from relatively mild infections including pharyngitis to more severe illnesses such as invasive diseases and rheumatic heart disease (RHD). Our aim is to estimate the cost-effectiveness of a hypothetical Strep A vaccine on multiple disease manifestations at the global-level. Cost-effectiveness analyses were carried out by building on the potential epidemiological impact of vaccines that align with the WHO's Preferred Product Characteristics for Strep A vaccines. Maximum vaccination costs for a cost-effective vaccination strategy were estimated at the thresholds of 1XGDP per capita and health opportunity costs. The maximum cost per fully vaccinated person for Strep A vaccination to be cost-effective was $385-$489 in high-income countries, $213-$312 in upper-income-income countries, $74-$132 in lower-middle-income countries, and $37-$69 in low-income countries for routine vaccination at birth and 5 years of age respectively. While the threshold costs are sensitive to vaccine characteristics such as efficacy, and waning immunity, a cost-effective Strep A vaccine will lower morbidity and mortality burden in all income settings.

Global, regional, and country-level cost of leptospirosis due to loss of productivity in humans.

BACKGROUND: Leptospirosis, a prevalent zoonotic disease with One Health priority and a disease of poverty, lacks global economic burden estimates. This study aims to determine the global, regional, and country-level cost of leptospirosis due to loss of productivity. METHODOLOGY/PRINCIPAL FINDINGS: The cost of leptospirosis due to loss of productivity (referred to as productivity cost hereafter) was estimated by converting the disability-adjusted life years (DALYs) lost due to leptospirosis to a monetary value using the per capita gross domestic product (GDP). The country-specific DALYs lost were obtained from the global burden of leptospirosis study published previously. Non-health GDP per capita (GDP- per capita health expenditure) was used for the cost conversion of DALYs. Country-specific GDP and health expenditure data were obtained from the World Bank data repositories. Estimates were done using both nominal and international dollars. The estimated global productivity cost of leptospirosis in 2019 was Int$ 29.3 billion, with low and high estimates ranging from Int$ 11.6 billion to 52.3 billion. China (Int$ 4.8 billion), India (Int$ 4.6 billion), Indonesia (Int$ 2.8 billion), Sri Lanka (Int$ 2.1 billion), and the United States (Int$ 1.3 billion) had the highest productivity cost due to leptospirosis. Eight out of 10 countries with the highest burden were in the Asia-Pacific region. In addition, lower-middle-income countries had an annual productivity cost of Int$ 13.8 billion, indicating that the disease is poverty-related. CONCLUSION: Although significant, the cost estimate due to loss of productivity is merely a fraction of the overall economic burden of this disease, which also includes other direct, indirect, and intangible costs. The existing partial estimates of the different components of economic cost suggest a profound economic burden that demands the inclusion of leptospirosis in the global health agenda for comprehensive disease control and prevention efforts, including vaccine development.

Medication-related osteonecrosis of the jaw using periodontitis-induced rat before tooth extraction.

OBJECTIVE: This study aimed to investigate the occurrence of medication-related osteonecrosis of the jaw (MRONJ) after tooth extraction due to periodontitis in ovariectomized rats. METHODS: Twenty-four osteoporosis-induced rats were administered with zoledronic acid (ZA; ZA group) or saline (CONT group). In both groups, tooth extraction was performed after inducing periodontitis, and all animals were sacrificed 8-week after tooth extraction. RESULTS: Micro-CT of the tibia showed that the bone volume fraction, bone surface density, trabecular number, and bone mineral density were significantly higher in the ZA group than in the CONT group. Histologically, the proliferative zone on the growth plate was thicker in the ZA group than in the CONT group. Micro-CT of the extraction sites revealed that the bone volume fraction was significantly higher in the ZA group than in the CONT group. Radiologically, the ZA group showed partial healing and delayed healing. Histological analysis revealed normal bone healing status with completely healed epithelium in the extraction sites of the CONT group, whereas abnormal empty osteocytes in the necrotic bone and inflammatory infiltration were observed in the ZA group. CONCLUSION: The incidence of MRONJ increased in the rats administered with ZA.

Synchrotron Analysis of Damaged Extraction Sockets Augmented Using a Synthetic Bone Block: A Pilot Study.

AIM: To investigate the dimensional stability and quality of the alveolar ridge augmented using a synthetic bone block (SBB) at damaged extraction sockets. MATERIALS AND METHODS: Four participants were included in whom socket augmentation was performed using SBB and a collagen membrane. Intraoral scan (IOS) was performed before extraction (baseline), immediately postoperative (IP), and at 6 months (6M). Cone-beam computed tomography (CBCT) was performed at IP and 6M. At 6M, a trephine biopsy was obtained during implant placement and the sample was observed using synchrotron. Profilometric change of soft tissue was measured from the IOS data, hard tissue dimensional change was measured from the CBCT data and the bone quality from synchrotron data. RESULTS: There were minimal changes in the soft tissue profile between baseline and IP, baseline and 6M, and IP and 6M (0.11±1.08 and 0.02±0.8, and -0.65±0.82 mm3). Horizontal bone width measured at 1 mm increments from the augmented bone crest to 5 mm apically revealed only slight reduction (less than 1 mm) at all levels between IP and 6M. The augmented bone height was well maintained from IP until 6M (-0.21±0.53 mm). Synchrotron analysis revealed low to moderate bone quality after 6M (percentage new bone = 16.49±4.91). CONCLUSIONS: Augmentation of the damaged extraction socket using SBB is a viable technique, in which the dimensions of the augmented ridge can be maintained up to 6M. Further long term randomized clinical trial is needed.

Dimensional changes after horizontal and vertical guided bone regeneration without membrane fixation using the retentive flap technique: A 1-year retrospective study.

AIM: To evaluate the dimensional changes after horizontal and vertical guided bone regeneration (GBR) without membrane fixation using the retentive flap technique. METHODS: This study retrospectively examined two cohorts that received vertical or horizontal ridge augmentations (VA or HA groups). GBR was performed using particulate bone substitutes and resorbable collagen membranes. The augmented sites were stabilized using the retentive flap technique without any additional membrane fixation. The augmented tissue dimensions were assessed using cone-beam computed tomography at preoperative, immediately postoperative (IP), 4 months (4M), and 1 year (1Y). RESULTS: Postoperative vertical bone gain in 11 participants of VA group amounted to 5.96 ± 1.88 mm at IP, which decreased to 5.53 ± 1.62 at 4M and to 5.26 ± 1.52 mm at 1Y (intragroup p < 0.05). The horizontal bone gain at IP in 12 participants amounted to 3.98 ± 2.06 mm, which decreased to 3.02 ± 2.06 at 4M and to 2.48 ± 2.09 mm at 1Y (intragroup p < 0.05). The mean implant dehiscence defect height after 1Y was 0.19 ± 0.50 mm in the VA group, and 0.57 ± 0.93 mm in the HA group. CONCLUSION: GBR without membrane fixation using the retentive flap technique seems to preserve the radiographic bone dimensions of vertically augmented sites. This technique may be less effective at preserving the width of the augmented tissue.

Global economic burden per episode for multiple diseases caused by group A Streptococcus.

Considering the lack of existing evidence on economic burden for diseases caused by group A Streptococcus, we estimated the economic burden per episode for selected diseases. Each cost component of direct medical costs (DMCs), direct non-medical costs (DNMCs), and indirect costs (ICs) was separately extrapolated and aggregated to estimate the economic burden per episode by income group as classified by the World Bank. Adjustment factors for DMC and DNMC were generated to overcome related data insufficiencies. To address uncertainty surrounding input parameters, a probabilistic multivariate sensitivity was carried out. The average economic burden per episode ranged from $22 to $392 for pharyngitis, $25 to $2,903 for impetigo, $47 to $2,725 for cellulitis, $662 to $34,330 for invasive and toxin-mediated infections, $231 to $6,332 for acute rheumatic fever (ARF), $449 to $11,717 for rheumatic heart disease (RHD), and $949 to $39,560 for severe RHD across income groups. The economic burden for multiple Group A Streptococcus diseases underscores an urgent need to develop effective prevention strategies including vaccines.

The Threat of Climate Change on Tick-Borne Infections: Rising Trend of Infections and Geographic Distribution of Climate Risk Factors Associated With Ticks.

Ticks transmit a wide range of pathogens. The spread of tick-borne infections is an emerging, yet often overlooked, threat in the context of climate change. The infections have rapidly increased over the past few years in South Korea despite no significant changes in socioeconomic circumstances. We investigated the impact of climate change on the surge of tick-borne infections and identified potential disease hot spots at a resolution of 5 km by 5 km. A composite index was constructed based on multiple climate and environmental indicators and compared with the observed tick-borne infections. The surge of tick-borne episodes corresponded to the rising trend of the index over time. High-risk areas identified by the index can be used to prioritize locations for disease prevention activities. Monitoring climate risk factors may provide an opportunity to predict the spread of the infections in advance.

Does the fixture thread depth affect the accuracy of implant placement during fully guided immediate implant placement?: A human cadaver study.

BACKGROUND: The fixture thread depth reportedly influences the primary stability of dental implant, but its effect on the positional accuracy in immediate implant placement has not been reported previously. MATERIALS AND METHODS: Fifty-six single-rooted, anterior and premolar teeth were extracted from six human cadavers, followed by installing either regular-threaded implants (RT group, N = 30) or deep-threaded implants (DT group, N = 26) completely relying on the surgical guide. Optical impressions taken after osteotomy and fixture installation were superimposed with the preoperative virtual planning data to measure the vertical, angular, platform and apex deviations that occurred during osteotomy and installation. RESULTS: While the osteotomy deviations were similar between the two groups, the angular and apex deviation of the DT group (2.67 ± 2.56°; 1.04 ± 0.49 mm, respectively) were significantly larger than those of the RT group (1.61 ± 1.04°; 0.67 ± 0.41 mm, respectively) during installation (p < .05). When the installation deviations were analysed in the anterior and premolar areas separately, the angular, platform and apex deviations of the DT group (3.05 ± 3.26°; 0.75 ± 0.32 mm; 1.08 ± 0.56 mm, respectively) were significantly larger than those of the RT group (1.56 ± 0.73°, 0.59 ± 0.28 mm; 0.62 ± 0.38 mm, respectively) in the anterior site (p < .05), whereas there was no significant intergroup difference in the premolar site. CONCLUSION: In immediate-implant surgery, using an implant with a deeper thread might increase the deviations during installation, especially in the anterior area.

Tissue integration patterns of non-crosslinked and crosslinked collagen membranes: an experimental in vivo study.

PURPOSE: Non-crosslinked and crosslinked collagen membranes are known to exhibit distinct degradation characteristics, resulting in contrasting orientations of the adjacent tissues and different biological processes. The aim of this study was to conduct a histomorphometric assessment of non-crosslinked and crosslinked collagen membranes regarding neovascularization, tissue integration, tissue encapsulation, and biodegradation. METHODS: Guided bone regeneration was performed using either a non-crosslinked (BG) or a crosslinked collagen membrane (CM) in 15 beagle dogs, which were euthanized at 4, 8, and 16 weeks (n=5 each) for histomorphometric analysis. The samples were assessed regarding neovascularization, tissue integration, encapsulation, the remaining membrane area, and pseudoperiosteum formation. The BG and CM groups were compared at different time periods using nonparametric statistical methods. RESULTS: The remaining membrane area of CM was significantly greater than that of BG at 16 weeks; however, there were no significant differences at 4 and 8 weeks. Conversely, the neovascularization score for CM was significantly less than that for BG at 16 weeks. BG exhibited significantly greater tissue integration and encapsulation scores than CM at all time periods, apart from encapsulation at 16 weeks. Pseudoperiosteum formation was observed in the BG group at 16 weeks. CONCLUSIONS: Although BG membranes were more rapidly biodegraded than CM membranes, they were gradually replaced by connective tissue with complete integration and maturation of the surrounding tissues to form dense periosteum-like connective tissue. Further studies need to be performed to validate the barrier effect of the pseudoperiosteum.