Investigating the Impact of Superabsorbent Polymer Sizes on Absorption and Cement Paste Rheology.

This study aims to understand the water retention capabilities of Superabsorbent Polymers (SAPs) in different alkaline environments for internal curing and to assess their impact on the rheological properties of cement paste. Therefore, the focus of this paper is on the absorption capacities of two different sizes of polyacrylic-based Superabsorbent Polymers : SAP A, with an average size of 28 µm, and SAP B, with an average size of 80 µm, in various solutions, such as pH 7, pH 11, pH 13, and cement filtrate solution (pH 13.73). Additionally, the study investigates the rheological properties of SAP-modified cement pastes, considering three different water-to-cement (w/c) ratios (0.4, 0.5, and 0.6) and four different dosages of SAPs (0.2%, 0.3%, 0.4%, and 0.5% by weight of cement). The results showed that the absorption capacity of SAP A was higher in all solutions compared to SAP B. However, both SAPs exhibited lower absorption capacity and early desorption in the cement filtrate solution. In contrast to the absorption results in pH 13 and cement filtrate solutions, the rheological properties, including plastic viscosity and yield stress, of the cement paste with a w/c ratio of 0.4 and 0.5, as well as both dry and wet (presoaked) SAPs, were higher than those of the cement paste without SAP, indicating continuous absorption by SAP. The viscosity and yield stress increased over time with increasing SAP dosage. However, in the mixes with a w/c ratio of 0.6, the values of plastic viscosity and yield stress were initially lower for the mixes with dry SAPs compared to the reference mix. Additionally, cement pastes containing wet SAP showed higher viscosity and yield stress compared to the pastes containing dry SAP.

Bilateral Visual Impairment following Combination Chemotherapy with Carboplatin in Patients with Small Cell Lung Cancer: A Case Report.

Background: Platinum-based combination chemotherapy, including cisplatin and carboplatin, are important cytotoxic anti-cancer agents that are widely used to treat various solid tumors. Carboplatin has a similar effect on survival in small cell lung cancer, but generally has a milder toxicity profile when compared with cisplatin. Both may cause moderate or severe neurotoxicity, but ocular neurotoxicity from carboplatin is rarely reported. Case presentation: A 79-year-old man underwent intravenous polychemotherapy (atezolizumab, etoposide, and carboplatin) for small cell lung cancer. One week after the second cycle of chemotherapy, he reported bilateral visual loss as hand motion in both eyes. Dilated fundus examination showed retinal arterial narrowing without hemorrhage, and diffuse choroidal and retinal thinning was observed in an optical coherence tomography scan. Fluorescein angiography revealed significantly delayed circulation without evidence of obstructive lesions. 30-Flicker electroretinogram testing showed a complete absence of cone response in both eyes. The patient's visual acuity aggravated to no light perception in both eyes, even after the cessation of chemotherapy. Conclusions: Carboplatin combination chemotherapy administered at therapeutic doses can result in irreversible visual loss, a side effect that is not widely acknowledged. When using carboplatin, physicians should be aware of its potential ocular toxicity.

Fluorinated Organic Cations Derived Chiral 2D Perovskite Enabling Enhanced Spin-Dependent Oxygen Evolution Reaction.

Chirality-induced spin selectivity observed in chiral 2D organic-inorganic hybrid perovskite holds promise to achieve spin-dependent electrochemistry. However, conventional chiral 2D perovskites suffer from low conductivity and hygroscopicity, limiting electrochemical performance and operational stability. Here, a cutting-edge material design is introduced to develop a stable and efficient chiral perovskite-based spin polarizer by employing fluorinated chiral cation. The fluorination approach effectively promotes the charge carrier transport along the out-of-plane direction by mitigating the dielectric confinement effect within the multi-quantum well-structured 2D perovskite. Integrating the fluorinated cation incorporated spin polarizer with BiVO4 photoanode considerably boosts the photocurrent density while reducing overpotential through a spin-dependent oxygen evolution reaction. Furthermore, the hydrophobic nature of fluorine in spin polarizer endows operational stability to the photoanode, extending the durability by 280% as compared to the device with non-fluorinated spin polarizer.

Rugged Island-Bridge Inorganic Electronics Mounted on Locally Strain-Isolated Substrates.

Various strain isolation strategies that combine rigid and stretchable regions for stretchable electronics were recently proposed, but the vulnerability of inorganic materials to mechanical stress has emerged as a major impediment to their performance. We report a strain-isolation system that combines heteropolymers with different elastic moduli (i.e., hybrid stretchable polymers) and utilize it to construct a rugged island-bridge inorganic electronics system. Two types of prepolymers were simultaneously cross-linked to form an interpenetrating polymer network at the rigid-stretchable interface, resulting in a hybrid stretchable polymer that exhibited efficient strain isolation and mechanical stability. The system, including stretchable micro-LEDs and microheaters, demonstrated consistent operation under external strain, suggesting that the rugged island-bridge inorganic electronics mounted on a locally strain-isolated substrate offer a promising solution for replacing conventional stretchable electronics, enabling devices with a variety of form factors.

Enhancer switching in cell lineage priming is linked to eRNA, Brg1's AT-hook, and SWI/SNF recruitment.

RNA transcribed from enhancers, i.e., eRNA, has been suggested to directly activate transcription by recruiting transcription factors and co-activators. Although there have been specific examples of eRNA functioning in this way, it is not clear how general this may be. We find that the AT-hook of SWI/SNF preferentially binds RNA and, as part of the esBAF complex, associates with eRNA transcribed from intronic and intergenic regions. Our data suggest that SWI/SNF is globally recruited in cis by eRNA to cell-type-specific enhancers, representative of two distinct stages that mimic early mammalian development, and not at enhancers that are shared between the two stages. In this manner, SWI/SNF facilitates recruitment and/or activation of MLL3/4, p300/CBP, and Mediator to stage-specific enhancers and super-enhancers that regulate the transcription of metabolic and cell lineage priming-related genes. These findings highlight a connection between ATP-dependent chromatin remodeling and eRNA in cell identity and typical- and super-enhancer activation.

Exploratory Clinical Trial of a Depression Diagnostic Software That Integrates Stress Biomarkers and Composite Psychometrics.

OBJECTIVE: This study evaluated the clinical effectiveness of Minds.NAVI, a depression screening kit combining psychometric measures and stress hormone biomarkers, in a prospective clinical trial. The objective was to assess its potential as a depression screening tool and investigate the associations between psychological assessments, salivary hormone staging, and depression severity. METHODS: Thirty-five participants with major depressive disorder and 12 healthy controls (HCs) were included. The Minds.NAVI software, utilizing the PROtective and Vulnerable factors battEry Test (PROVE) and salivary cortisol/dehydroepiandrosterone (DHEA) analysis, was employed. The PROVE test is a comprehensive self-report questionnaire that assesses depressive symptoms, suicide risk, attachment style, adverse childhood experiences, mentalization capacity, and resilience. In addition, salivary cortisol and DHEA levels were measured to evaluate the functional stage of the hypothalamic-pituitary-adrenal (HPA) axis. RESULTS: Minds.NAVI exhibited 100% sensitivity, 91.7% specificity, and 97.9% accuracy in distinguishing depression from HCs within an exploratory small group. Salivary stress hormone phases showed changes with depression stage (p=0.030), and the proportion of patients with "adrenal exhaustion stage" was higher in the moderate/severe depression group (p=0.038). Protective/vulnerable factors differed significantly between controls and depressed groups (p<0.001). Cortisol awakening response inversely correlated with depressive symptom severity (r=-0.31, p=0.034). CONCLUSION: This study suggested possible clinical effectiveness of Minds.NAVI, a depression screening tool that integrates psychometric measures and stress hormone biomarkers. The findings support the potential association between depression, chronic stress, and HPA axis hyporesponsiveness.

Core-Shell Perovskite Quantum Dots for Highly Selective Room-Temperature Spin Light-Emitting Diodes.

Circularly polarized light (CPL) is a crucial light source with a wide variety of potential applications such as magnetic recording, and 3D display. Here, core-shell heterostructured perovskite quantum dots (QDs) for room-temperature spin-polarized light-emitting diodes (spin-LEDs) are developed. Specifically, a 2D chiral perovskite shell is deposited onto the achiral 3D inorganic perovskite (CsPbBr3 ) core. Owing to the chiral-induced spin selectivity effect, the spin state of the injected charge carriers is biased when they are transmitted through the 2D chiral shell. The spin-controlled carriers then radiatively recombine inside the CsPbBr3 emissive core, resulting in CPL emission. It is demonstrated that the (R)- and (S)-1-(2-(naphthyl)ethylamine) (R-/S-NEA) 2D chiral cations enhance the spin polarization degree due to their strong chiroptical properties. Systematical defect analyses confirm that 2D chiral cations (i.e., R-/S-NEA) successfully passivate halide vacancies at the surface of the CsPbBr3 QDs, thereby attaining a high photoluminescence quantum yield of 78%. Moreover, the spin-LEDs prepared with core-shell QDs achieve a maximum external quantum efficiency of 5.47% and circularly polarized electroluminescence with a polarization degree (PCP-EL ) of 12% at room temperature. Finally, various patterns fabricated by inkjet printing the core-shell QDs emit strong CPL, highlighting their potential as an emitter for next-generation displays.

Wearable and Wavelength-Tunable Near-Infrared Organic Light-Emitting Diodes for Biomedical Applications.

Near-infrared organic light-emitting diodes (NIR OLEDs) have significant potential for wearable phototherapeutic applications because of the unique properties of the OLEDs, including their free-form electronics and the excellent biomedical effects of NIR emission. In spite of their tremendous promise, given that the majority of NIR OLEDs in previous research have relied on the utilization of an intrinsically brittle indium tin oxide (ITO) electrode, their practicality in the field of wearable electronics is inherently constrained. Here, we report wearable and wavelength-tunable NIR OLEDs that employ a high-performance NIR emitter and an innovative architecture by replacing the ITO with a silver (Ag) electrode. The NIR OLEDs permit wavelength tuning of emissions from 700 to 800 nm and afford stable operation even under repeated bending conditions. The NIR OLEDs provide a lowered device temperature of 37.5 °C even during continuous operation under several emission intensities. In vitro experiments were performed with freshly fabricated NIR OLEDs. The outcomes were evaluated against experimental results performed using the same procedure utilizing blue, green, and red OLEDs. When exposed to NIR light irradiation, the promoting effect of cell proliferation surpassed the proliferative responses observed under the influence of visible light irradiation. The proliferation effect of human hair follicle dermal papilla cells is clearly related to the irradiation wavelength and time, thus underscoring the potential of wavelength-tunable NIR OLEDs for efficacious phototherapy. This work will open novel avenues for wearable NIR OLEDs in the field of biomedical application.

Seven-year outcomes of combined treatment of anti-vascular endothelial growth factor with photodynamic therapy for polypoidal choroidal vasculopathy; according to polypoidal lesion regression.

PURPOSE: To evaluate the long-term prognosis of polypoidal choroidal vasculopathy (PCV) treated with anti-vascular endothelial growth factor (anti-VEGF) combined with verteporfin photodynamic therapy (PDT), according to polypoidal lesion regression. METHODS: This study retrospectively reviewed the data of 33 naïve eyes with PCV treated with anti-VEGF combined with verteporfin PDT and followed-up for at least 7 years. The collected data included demographic profile, best-corrected visual acuity (BCVA), central foveal thickness (CFT), PED volume, and presence of submacular hemorrhage. Regression of polypoidal lesion was determined using indocyanine green angiography and optical coherence tomography. All eyes were divided into regression or persistent groups, based on the polypoidal lesion regression one year after the initial combined treatment. RESULTS: BCVA improvement was maintained for 3 years in the regression (p = 0.001) and 1 year in the persistent (p = 0.006) groups, respectively. The mean BCVA of the regression group was better than that of the persistent group over 7 years, but the difference was significant only at 1 year (p = 0.037). The number of eyes which maintained BCVA less than or equal to 0.3 logMAR at 7 years was 11 eyes (64.7%) in regression group and 4 eyes (25.0%) in persistent group (p = 0.022). CONCLUSIONS: Regression of the polypoidal lesion at 1 year after the initial combination treatment was associated with favorable long-term visual prognosis, particularly in terms of maintaining good visual acuity.

Tailoring Thermoresponsive Polymer Architecture to Enhance Antifouling and Fouling Reversibility of Membranes.

Cleaning a fouled membrane using warm water, instead of commonly used fouling control chemicals, is an approach advocated in resource-limited settings, where small-scale membrane filtration is used to provide clean water. Thermoresponsive polymers coated onto membranes undergo a conformational change across their lower critical solution temperature (LCST), enabling foulant removal during such temperature-swing cleaning. However, their intrinsic hydrophobicity above the LCST poses a fundamental material challenge. In this study, we examine how thermoresponsive polymers can be optimally copolymerized with hydrophilic polymers by precisely manipulating monomer arrangement of thermoresponsive N-isopropylacrylamide and hydrophilic 2-[2-(2-methoxyethoxy)ethoxy]ethyl acrylate. We successfully grafted these copolymers with different monomer arrangements onto poly(ether sulfone) ultrafiltration membranes while maintaining other polymer characteristics, such as the degree of polymerization and grafting density, constant. We found that placing hydrophilic polymer blocks at the outermost surface above the thermoresponsive polymer blocks is critical to achieving high surface hydrophilicity while preserving the thermoresponsive functionality. We demonstrate enhanced fouling resistance and efficient temperature-swing cleaning with optimized copolymer design based on their interaction with bovine serum albumin during static adsorption, filtration, and cleaning processes. These findings emphasize the importance of accurately tailoring the polymer architecture to enable more efficient filtration with reduced fouling and the capability to effectively clean the fouled membrane by simply using warm water.

Diagnosing Polypoidal Choroidal Vasculopathy Using Color Fundus Photography, Optical Coherence Tomography, and Optical Coherence Tomography Angiography.

PURPOSE: To compare the diagnostic accuracy of differentiating polypoidal choroidal vasculopathy (PCV) from exudative age-related macular degeneration (AMD), using color fundus photography (CFP), optical coherence tomography (OCT), and swept-source OCT angiography (SS-OCTA) without using indocyanine green angiography (ICGA). METHODS: Treatment-naive eyes with exudative AMD that underwent CFP, OCT, SS-OCTA, and ICGA imaging before treatment were identified. Images of each patient were categorized into two sets (set A, CFP + OCT; set B, CFP + SS-OCTA). In set B, both the en face and cross-sectional B scans were analyzed. Each set was reviewed by two graders, and it was determined whether the presumed diagnosis was PCV. Sensitivity, specificity, and area under the receiver operating characteristic curve (AUC) for the diagnosis of PCV were assessed for each set by comparing diagnoses that included ICGA. The number of polypoidal lesions in each set was calculated and compared to ICGA. RESULTS: A total of 94 eyes from 94 patients with AMD were included in the study, of which 66.0% were male, and the mean age was 71.8 ± 9.0 years. The PCV diagnosis rate using ICGA was 45.7%. The sensitivity was 0.88 for set A and 0.93 for set B, while the specificity was 0.94 for set A and 0.96 for set B. The AUC was 0.90 (95% confidence interval [CI], 0.83-0.97) for set A and 0.96 (95% CI, 0.90-1.00) for set B. Set A detected 1.28 ± 0.91 polypoidal lesions, while set B detected 1.47 ± 1.01; ICGA showed 1.51 ± 0.86. CONCLUSIONS: This study highlights that, without using ICGA, both CFP combined with OCT and CFP combined with SS-OCTA demonstrate high sensitivity, specificity, and AUC in diagnosing PCV. It is evident that SS-OCTA contributes to enhancing sensitivity, specificity, and AUC for PCV diagnosis.

Size-Selective Ionic Crosslinking Provides Stretchable Mixed Ionic-Electronic Conductors.

Mechanically compliant conductors are of utmost importance for the emerging fields of soft electronics and robotics. However, the development of intrinsically deformable organic conductors remains a challenge due to the trade-off between mechanical performance and charge mobility. In this study, we report a solution to this issue based on size-selective ionic crosslinking. This rationally designed crosslinking mediated by length-regulated oligo(ethylene glycol) pendant groups and metal ions simultaneously improved the softness and toughness and ensured excellent mixed ionic-electronic conductivity in poly(3,4-ethylenedioxythiophene):polystyrene sulfonate composite materials. Moreover, the added ions remarkably promoted accumulation of charge carriers in response to temperature gradient, thus offering a viable approach to stretchable thermoelectric generators with enhanced stability against humidity.

The AT-hook is an evolutionarily conserved auto-regulatory domain of SWI/SNF required for cell lineage priming.

The SWI/SNF ATP-dependent chromatin remodeler is a master regulator of the epigenome, controlling pluripotency and differentiation. Towards the C-terminus of the catalytic subunit of SWI/SNF is a motif called the AT-hook that is evolutionary conserved. The AT-hook is present in many chromatin modifiers and generally thought to help anchor them to DNA. We observe however that the AT-hook regulates the intrinsic DNA-stimulated ATPase activity aside from promoting SWI/SNF recruitment to DNA or nucleosomes by increasing the reaction velocity a factor of 13 with no accompanying change in substrate affinity (KM). The changes in ATP hydrolysis causes an equivalent change in nucleosome movement, confirming they are tightly coupled. The catalytic subunit's AT-hook is required in vivo for SWI/SNF remodeling activity in yeast and mouse embryonic stem cells. The AT-hook in SWI/SNF is required for transcription regulation and activation of stage-specific enhancers critical in cell lineage priming. Similarly, growth assays suggest the AT-hook is required in yeast SWI/SNF for activation of genes involved in amino acid biosynthesis and metabolizing ethanol. Our findings highlight the importance of studying SWI/SNF attenuation versus eliminating the catalytic subunit or completely shutting down its enzymatic activity.

Unraveling chirality transfer mechanism by structural isomer-derived hydrogen bonding interaction in 2D chiral perovskite.

In principle, the induced chirality of hybrid perovskites results from symmetry-breaking within inorganic frameworks. However, the detailed mechanism behind the chirality transfer remains unknown due to the lack of systematic studies. Here, using the structural isomer with different functional group location, we deduce the effect of hydrogen-bonding interaction between two building blocks on the degree of chirality transfer in inorganic frameworks. The effect of asymmetric hydrogen-bonding interaction on chirality transfer was clearly demonstrated by thorough experimental analysis. Systematic studies of crystallography parameters confirm that the different asymmetric hydrogen-bonding interactions derived from different functional group location play a key role in chirality transfer phenomena and the resulting spin-related properties of chiral perovskites. The methodology to control the asymmetry of hydrogen-bonding interaction through the small structural difference of structure isomer cation can provide rational design paradigm for unprecedented spin-related properties of chiral perovskite.

A supramolecular gel-elastomer system for soft iontronic adhesives.

Electroadhesion provides a promising route to augment robotic functionalities with continuous, astrictive, and reversible adhesion force. However, the lack of suitable conductive/dielectric materials and processing capabilities have impeded the integration of electroadhesive modules into soft robots requiring both mechanical compliance and robustness. We present herein an iontronic adhesive based on a dynamically crosslinked gel-elastomer system, including an ionic organohydrogel as adhesive electrodes and a resilient polyurethane with high electrostatic energy density as dielectric layers. Through supramolecular design and synthesis, the dual-material system exhibits cohesive heterolayer bonding and autonomous self-healing from damages. Iontronic soft grippers that seamlessly integrate actuation, adhesive prehension, and exteroceptive sensation are devised via additive manufacturing. The grippers can capture soft and deformable items, bear high payload under reduced voltage input, and rapidly release foreign objects in contrast to electroadhesives. Our materials and iontronic mechanisms pave the way for future advancement in adhesive-enhanced multifunctional soft devices.

Hybrid Perovskite-Based Wireless Integrated Device Exceeding a Solar to Hydrogen Conversion Efficiency of 11.

A wireless solar water splitting device provides a means to achieve an inexpensive and highly distributed solar-to-fuel system owing to its portability, flexible scale, and simple design. Here, a highly efficient hydrogen-generating artificial leaf is introduced, which is a wireless configuration for converting solar energy into chemical energy, by integrating a hybrid perovskite (PSK) as the light absorber with catalysts for electrochemical reaction. First, a single integrated photoelectrochemical photocathode, and a spatially decoupled hydrogen evolution reaction catalyst, are fabricated. A decoupled geometry is adopted to enable the physical protection of the PSK layer from the electrolyte, thus allowing excellent stability for over 85 h. Additionally, an efficient dual photovoltaic module photocathode is fabricated to produce sufficient photovoltage to drive water splitting reactions, as well as a high photocurrent to achieve the applied-bias photoconversion efficiency (13.5%). To investigate the overall water splitting performance, a NiFe-OH catalyst is employed, and the device with a wired configuration achieves a photocurrent density of 9.35 mA cm-2 , corresponding to a solar to hydrogen (STH) efficiency of 11.5%. The device with a fully integrated wireless artificial leaf configuration exhibited a similar STH efficiency of over 11%, demonstrating the effectiveness of this cell design.

Computer-Aided Breast Surgery Framework Using a Markerless Augmented Reality Method.

This study proposes a markerless Augmented Reality (AR) surgical framework for breast lesion removal using a depth sensor and 3D breast Computed Tomography (CT) images. A patient mesh in the real coordinate system is acquired through a patient 3D scan using a depth sensor for registration. The patient mesh on the virtual coordinate system is obtained by contrast-based skin segmentation in 3D mesh generated from breast CT scans. Then, the nipple area is detected based on the gradient in the segmented skin area. The region of interest (ROI) is set based on the detection result to select the vertices in the virtual coordinate system. The mesh on the real and virtual coordinate systems is first aligned by matching the center of mass, and the Iterative Closest Point (ICP) method is applied to perform more precise registration. Experimental results of 20 patients' data showed 98.35 ± 0.71% skin segmentation accuracy in terms of Dice Similarity Coefficient (DSC) value, 2.79 ± 1.54 mm nipple detection error, and 4.69 ± 1.95 mm registration error. Experiments using phantom and patient data also confirmed high accuracy in AR visualization. The proposed method in this study showed that the 3D AR visualization of medical data on the patient's body is possible by using a single depth sensor without having to use markers.

Mucosal delivery of nanovaccine strategy against COVID-19 and its variants.

Despite the global administration of approved COVID-19 vaccines (e.g., ChAdOx1 nCoV-19®, mRNA-1273®, BNT162b2®), the number of infections and fatalities continue to rise at an alarming rate because of the new variants such as Omicron and its subvariants. Including COVID-19 vaccines that are licensed for human use, most of the vaccines that are currently in clinical trials are administered via parenteral route. However, it has been proven that the parenteral vaccines do not induce localized immunity in the upper respiratory mucosal surface, and administration of the currently approved vaccines does not necessarily lead to sterilizing immunity. This further supports the necessity of a mucosal vaccine that blocks the main entrance route of COVID-19: nasal and oral mucosal surfaces. Understanding the mechanism of immune regulation of M cells and dendritic cells and targeting them can be another promising approach for the successful stimulation of the mucosal immune system. This paper reviews the basic mechanisms of the mucosal immunity elicited by mucosal vaccines and summarizes the practical aspects and challenges of nanotechnology-based vaccine platform development, as well as ligand hybrid nanoparticles as potentially effective target delivery agents for mucosal vaccines.

Promoting Psychological Well-Being at Workplace through Protean Career Attitude: Dual Mediating Effect of Career Satisfaction and Career Commitment.

The management paradigm of SMEs is changing due to the recent Fourth Industrial Revolution and the changing COVID-19 environment. To respond to these changes, companies are focusing on protean career attitude (PCA) and psychological well-being (PWB) of employees to improve corporate performance. Under these circumstances, this study investigated the structural relationship of the dual mediation effects of career commitment and career satisfaction in the relationship between PCA and PWB. To this end, this study targeted 307 employees of Korean small and medium-sized enterprises (SMEs), and the results are as follows. First, PCA was found to have a positive effect on career satisfaction and PCA was found to have a positive effect on career commitment. Second, PCA was found to have a significant effect on PWB. Third, career satisfaction, a parameter of this study, was found to have a positive impact on career commitment; in the relationship between PCA and PWB, the dual mediation effects of career satisfaction and career commitment were found to be significant. Finally, this study provided discussions and theoretical and practical implications based on those results, as well as directions for future research.

Tailoring the Time-Averaged Structure for Polarization-Sensitive Chiral Perovskites.

Chiral perovskites have emerged as promising candidates for polarization-sensing materials. Despite their excellent chiroptical properties, the nature of their multiple-quantum-well structures is a critical hurdle for polarization-based and spintronic applications. Furthermore, as the origin of chiroptical activity in chiral perovskites is still illusive, the strategy for simultaneously enhancing the chiroptical activity and charge transport has not yet been reported. Here, we demonstrated that incorporating a Lewis base into the lattice can effectively tune the chiroptical response and electrical properties of chiral perovskites. Through solid-state nuclear magnetic resonance spectroscopic measurements and theoretical calculations, it was demonstrated that the material property manipulation resulted from the change in the time-averaged structure induced by the Lewis base. Finally, as a preliminary proof of concept, a vertical-type circularly polarized light photodetector based on chiral perovskites was developed, exhibiting an outstanding performance with a distinguishability of 0.27 and a responsivity of 0.43 A W-1.