Rapid PCR kit: lateral flow paper strip with Joule heater for SARS-CoV-2 detection.

Polymerase chain reaction (PCR)-based diagnostic kits for point-of-care (POC) testing are highly desirable to prevent the spread of infectious diseases. Here, we demonstrate a rapid PCR testing kit that involves integrating a lateral flow paper strip with a nichrome-based thin film heater. The use of a paper membrane as a PCR-solution container results in fast thermocycling without a cooler because the membrane can contain the solution with a high specific surface area where Joule heating is applied. After PCR, amplified products are simultaneously detected at the lateral flow paper strip with the naked eye. Severe acute respiratory syndrome ß-coronavirus RNA can be detected within 30 min after PCR solution injection. This work reveals that the paper membrane can act as not only a capillary flow channel but also as a promising platform for fast PCR and detection.

Wafer-Scale LSPR Substrate: Oblique Deposition of Gold on a Patterned Sapphire Substrate.

Label-free detection of biomolecules using localized surface plasmon resonance (LSPR) substrates is a highly attractive method for point-of-care (POC) testing. One of the remaining challenges to developing LSPR-based POC devices is to fabricate the LSPR substrates with large-scale, reproducible, and high-throughput. Herein, a fabrication strategy for wafer-scale LSPR substrates is demonstrated using reproducible, high-throughput techniques, such as nanoimprint lithography, wet-etching, and thin film deposition. A transparent sapphire wafer, on which SiO2-nanodot hard masks were formed via nanoimprint lithography, was anisotropically etched by a mixed solution of H2SO4 and H3PO4, resulting in a patterned sapphire substrate (PSS). An LSPR substrate was finally fabricated by oblique deposition of Au onto the PSS, which was then applied to label-free detection of the binding events of biomolecules. To the best of our knowledge, this paper is the first report on the application of the PSS used as an LSPR template by obliquely depositing a metal.

Gold nanocap-supported upconversion nanoparticles for fabrication of a solid-phase aptasensor to detect ochratoxin A.

Solid-phase, single-step biosensors are crucial for the development of portable, reusable, and convenient biosensors, otherwise known as point-of-care (POC) testing. Although high-performance single-step biosensors based on the principle of Förster resonance energy transfer (FRET) and using upconversion nanoparticles (UCNPs) functionalized with aptamers have been suggested as easy-to-use platforms, they lack portability and reusability when used for solution-phase biosensing. In this study, we describe a solid-phase, single-step aptasensor that showed higher performance than those of solution-phase aptasensors, as well as promising reusability. The solid-phase, single-step aptasensor was developed based on Au nanocap-supported UCNPs (Au/UCNPs), which were partially embedded in a solid substrate (e.g. polydimethylsiloxane, PDMS). The Au nanocaps allowed the UCNPs to emit upconverted light only from the restricted areas of the UCNPs, i.e., where they were not covered by the nanocaps and PDMS. Functionalization of an aptamer labeled with a quencher on the restricted area enabled the effective quenching of upconverted light from Au/UCNP via FRET after target (ochratoxin A, OTA) detection. The solid-phase, single-step aptasensor showed a linear range of 0.1-1000 ng mL-1 and limit of detection of 0.022 ng mL-1 within 30 min toward OTA. Furthermore, reusability of the solid-phase aptasensor was evaluated for three cycles of detection and regeneration, establishing its apparent reusability via heat treatment. Hence, such solid-phase, single-step aptasensors pave the path to the development of a portable and reusable biosensor platform for POC testing.

Improved sensing characteristics of dual-gate transistor sensor using silicon nanowire arrays defined by nanoimprint lithography.

This work describes the construction of a sensitive, stable, and label-free sensor based on a dual-gate field-effect transistor (DG FET), in which uniformly distributed and size-controlled silicon nanowire (SiNW) arrays by nanoimprint lithography act as conductor channels. Compared to previous DG FETs with a planar-type silicon channel layer, the constructed SiNW DG FETs exhibited superior electrical properties including a higher capacitive-coupling ratio of 18.0 and a lower off-state leakage current under high-temperature stress. In addition, while the conventional planar single-gate (SG) FET- and planar DG FET-based pH sensors showed the sensitivities of 56.7 mV/pH and 439.3 mV/pH, respectively, the SiNW DG FET-based pH sensors showed not only a higher sensitivity of 984.1 mV/pH, but also a lower drift rate of 0.8% for pH-sensitivity. This demonstrates that the SiNW DG FETs simultaneously achieve high sensitivity and stability, with significant potential for future biosensing applications.

Enzyme-coupled nanoplasmonic biosensing of cancer markers in human serum.

As the use of biosensors for early in-vitro diagnosis of malignant diseases has expanded, issues associated with ultra-sensitivity and wide dynamic range have become paramount. In this study, we designed a sub-zeptomolar sensor for detecting the alpha-feto protein (AFP) that utilizes localized surface plasmon resonance (LSPR) assisted by bio-catalytic reaction and a self-controlled detection scheme. A gold nanodot array (GNA), serving as a plasmonic material, was fabricated using an improved UV nanoimprint lithography (NIL) method that employs a sacrificial layer. In the new approach, LSPR observation is highly stable because it employs a back reflection mode, which avoids passing the signal through the sample solution. An enzyme-precipitation reaction was conducted on the AFP antigen-antibody complex on the surface of the gold nanodot (nano-ELISA) using a procedure that was described previously. To extend the AFP detection limit below femtomolar concentrations, a scheme involving self-controlled detection was employed to lower the limit. In this method, the sample including the target simultaneously plays the role of both sample and negative control. Using this scheme, AFP can be detected at concentrations as low as 14 aM (0.7 zeptomole in 50µL serum) and with the wide dynamic range of 10fgmL(-1)-10ngmL(-1). Importantly, the new method provides a platform for studying and monitoring interactions between biochemically active substances that are present in very low concentrations. Finally, the general strategy used to design the detection method can be easily adapted to the ultra-sensitive detection of other biomarkers and pathogens.

Aluminum Nanoarrays for Plasmon-Enhanced Light Harvesting.

The practical limits of coinage-metal-based plasmonic materials demand sustainable, abundant alternatives with a wide plasmonic range of the solar energy spectrum. Aluminum (Al) is an emerging alternative, but its instability in aqueous environments critically limits its applicability to various light-harvesting systems. Here, we report a design strategy to achieve a robust platform for plasmon-enhanced light harvesting using Al nanostructures. The incorporation of mussel-inspired polydopamine nanolayers in the Al nanoarrays allowed for the reliable use of Al plasmonic resonances in a highly corrosive photocatalytic redox solution and provided nanoscale arrangement of organic photosensitizers on Al surfaces. The Al-photosensitizer core-shell assemblies exhibited plasmon-enhanced light absorption, which resulted in a 300% efficiency increase in photo-to-chemical conversion. Our strategy enables stable and advanced use of aluminum for plasmonic light harvesting.

Strategic model of national rabies control in Korea.

Rabies is an important zoonosis in the public and veterinary healthy arenas. This article provides information on the situation of current rabies outbreak, analyzes the current national rabies control system, reviews the weaknesses of the national rabies control strategy, and identifies an appropriate solution to manage the current situation. Current rabies outbreak was shown to be present from rural areas to urban regions. Moreover, the situation worldwide demonstrates that each nation struggles to prevent or control rabies. Proper application and execution of the rabies control program require the overcoming of existing weaknesses. Bait vaccines and other complex programs are suggested to prevent rabies transmission or infection. Acceleration of the rabies control strategy also requires supplementation of current policy and of public information. In addition, these prevention strategies should be executed over a mid- to long-term period to control rabies.

Nanotransfer molding of free-standing nanowire and porous nanomembranes suspended on microtrenches.

Direct transfer printing of functional materials has been employed in the development of sensors, displays, and energy-harvesting devices. The transfer process can be applied advantageously to depositions onto nonplanar and flexible surfaces at low temperatures. In this work, we fabricated free-standing nanowire arrays and nanomembranes on micrometer-scale trenches by nanotransfer molding. We also investigated how deposition pattern types vary with trench dimensions as well as processing pressure and temperature. Finally, a free-standing polymer membrane fabricated by nanotransfer molding was employed as a novel mask in the preparation of three-dimensional nanodot arrays.

An Antireflective Nanostructure Array Fabricated by Nanosilver Colloidal Lithography on a Silicon Substrate.

An alternative method is presented for fabricating an antireflective nanostructure array using nanosilver colloidal lithography. Spin coating was used to produce the multilayered silver nanoparticles, which grew by self-assembly and were transformed into randomly distributed nanosilver islands through the thermodynamic action of dewetting and Oswald ripening. The average size and coverage rate of the islands increased with concentration in the range of 50-90 nm and 40-65%, respectively. The nanosilver islands were critically affected by concentration and spin speed. The effects of these two parameters were investigated, after etching and wet removal of nanosilver residues. The reflection nearly disappeared in the ultraviolet wavelength range and was 17% of the reflection of a bare silicon wafer in the visible range.

Photovoltaic devices with an active layer from a stamping transfer technique: single layer versus double layer.

In this study, organic photovoltaic devices with single or double-layered active film were prepared from a stamping transfer technique. A P3HT/PCBM single-layered active layer and a ratio-controlled P3HT/PCBM double-layered active can be successfully fabricated with the help of ultraviolet curable polycarbonate films via a stamping transfer technique. The maximum conversion efficiency values 2.85 for a single active layer transferred device and 3.24% for an optimized double active layer transferred device. Even though transferred double layers should have a sharp interface boundary, an intermixed zone with a concentration gradient was generated by the interpenetration of a donor-rich layer and an acceptor-rich layer in a thermal annealing process. The generation of the intermixed zone is confirmed by Auger electron spectroscopy. The enhanced conversion efficiency levels are attributed to the increased efficiency of the carrier transporting process, which is due to the fact that the concentration gradient is combined with the efficient charge generation from the bulk heterojunction layers.

Biomedical named entity recognition using two-phase model based on SVMs.

Named entity (NE) recognition has become one of the most fundamental tasks in biomedical knowledge acquisition. In this paper, we present a two-phase named entity recognizer based on SVMs, which consists of a boundary identification phase and a semantic classification phase of named entities. When adapting SVMs to named entity recognition, the multi-class problem and the unbalanced class distribution problem become very serious in terms of training cost and performance. We try to solve these problems by separating the NE recognition task into two subtasks, where we use appropriate SVM classifiers and relevant features for each subtask. In addition, by employing a hierarchical classification method based on ontology, we effectively solve the multi-class problem concerning semantic classification. The experimental results on the GENIA corpus show that the proposed method is effective not only in reducing computational cost but also in improving performance. The F-score (beta=1) for the boundary identification is 74.8 and the F-score for the semantic classification is 66.7.