Mechanisms of the Device Property Alteration Generated by the Proton Irradiation in GaN-Based MIS-HEMTs Using Extremely Thin Gate Insulator.

Recently, we reported that device performance degradation mechanisms, which are generated by the γ-ray irradiation in GaN-based metal-insulator-semiconductor high electron mobility transistors (MIS-HEMTs), use extremely thin gate insulators. When the γ-ray was radiated, the total ionizing dose (TID) effects were generated and the device performance deteriorated. In this work, we investigated the device property alteration and its mechanisms, which were caused by the proton irradiation in GaN-based MIS-HEMTs for the 5 nm-thick Si3N4 and HfO2 gate insulator. The device property, such as threshold voltage, drain current, and transconductance varied by the proton irradiation. When the 5 nm-thick HfO2 layer was employed for the gate insulator, the threshold voltage shift was larger than that of the 5 nm-thick Si3N4 gate insulator, despite the HfO2 gate insulator exhibiting better radiation resistance compared to the Si3N4 gate insulator. On the other hand, the drain current and transconductance degradation were less for the 5 nm-thick HfO2 gate insulator. Unlike the γ-ray irradiation, our systematic research included pulse-mode stress measurements and carrier mobility extraction and revealed that the TID and displacement damage (DD) effects were simultaneously generated by the proton irradiation in GaN-based MIS-HEMTs. The degree of the device property alteration was determined by the competition or superposition of the TID and DD effects for the threshold voltage shift and drain current and transconductance deterioration, respectively. The device property alteration was diminished due to the reduction of the linear energy transfer with increasing irradiated proton energy. We also studied the frequency performance degradation that corresponded to the irradiated proton energy in GaN-based MIS-HEMTs using an extremely thin gate insulator.

Thermal Behavior of an AlGaN/GaN-Based Schottky Barrier Diode on Diamond and Silicon Substrates.

Devices based on AlGaN/GaN heterostructures, for example, Schottky barrier diodes (SBDs) and high electron mobility transistors (HEMTs), have been intensively investigated for applications to high-frequency and high-power areas. Presently, the substrates widely distributed are AlGaN/GaN on SiC for its high performance in radio frequency (RF) applications, for examples high cutoff frequency (fT) or high maximum oscillation frequency (fmax), and AlGaN/GaN on Si for its high power performance, for examples high breakdown voltage or high voltage operation. Chemical vapor deposition (CVD) diamond substrates have a thermal conductivity of 12 W/cm·K, and this is a remarkable point because HEMTs or SBDs on AlGaN/GaN on CVD diamonds are one of the promising alternatives for power and RF applications. In comparison, the thermal conductivity of AlGaN/GaN on a sapphire substrate is 0.33 W/cm·K while that of AlGaN/GaN on a Si substrate is 1.3 W/cm·K and that of AlGaN/GaN on a SiC substrate is 4.9 W/cm·K. In this work, we fabricated SBDs with a 137 mm Schottky channel length on AlGaN/GaN on Si and also on a CVD diamond substrate. We also compared the thermal behaviors of these fabricated large scale SBDs on Si and a CVD diamond substrate.

Comprehensive Research of Total Ionizing Dose Effects in GaN-Based MIS-HEMTs Using Extremely Thin Gate Dielectric Layer.

The device performance deterioration mechanism caused by the total ionizing dose effect after the γ-ray irradiation was investigated in GaN-based metal-insulator-semiconductor high electron mobility transistors (MIS-HEMTs) for a 5 nm-thick SiN and HfO2 gate dielectric layer. The γ-ray radiation hardness according to the gate dielectric layer was also compared between the two different GaN-based MIS-HEMTs. Although HfO2 has exhibited strong tolerance to the total ionizing dose effect in Si-based devices, there is no detail report of the γ-ray radiation effects in GaN-based MIS-HEMTs employing a HfO2 gate dielectric layer. The pulsed-mode stress measurement results and carrier mobility behavior revealed that the device properties not only have direct current (DC) characteristics, but radio frequency (RF) performance has also been mostly degraded by the deterioration of the gate dielectric quality and the trapped charges inside the gate insulator. We also figured out that the immunity to the γ-ray radiation was improved when HfO2 was employed instead of SiN as a gate dielectric layer due to its stronger endurance to the γ-ray irradiation. Our results highlight that the application of a gate insulator that shows superior immunity to the γ-ray irradiation is a crucial factor for the improvement of the total ionizing dose effect in GaN-based MIS-HEMTs.

Charging Effect by Fluorine-Treatment and Recess Gate for Enhancement-Mode on AlGaN/GaN High Electron Mobility Transistors.

An enhancement-mode AlGaN/GaN metal-insulator-semiconductor high-electron- mobility-transistor was fabricated using a recess gate and CF4 plasma treatment to investigate its reliable applicability to high-power devices and circuits. The fluorinated-gate device showed hysteresis during the DC current-voltage measurement, and the polarity and magnitude of hysteresis depend on the drain voltage. The hysteresis phenomenon is due to the electron trapping at the Al2O3/AlGaN interface and charging times longer than milliseconds were obtained by pulse I-V measurement. In addition, the subthreshold slope of the fluorinated-gate device was increased after the positive gate bias stress because of the two-dimensional electron gas reduction by ionized fluorine. Our systematic observation revealed that the effect of fluorine ions should be considered for the design of AlGaN/GaN power circuits.

Thermal Analysis and Operational Characteristics of an AlGaN/GaN High Electron Mobility Transistor with Copper-Filled Structures: A Simulation Study.

In this study, we investigated the operational characteristics of AlGaN/GaN high electron mobility transistors (HEMTs) by applying the copper-filled trench and via structures for improved heat dissipation. Therefore, we used a basic T-gate HEMT device to construct the thermal structures. To identify the heat flow across the device structure, a thermal conductivity model and the heat transfer properties corresponding to the GaN, SiC, and Cu materials were applied. Initially, we simulated the direct current (DC) characteristics of a basic GaN on SiC HEMT to confirm the self-heating effect on AlGaN/GaN HEMT. Then, to verify the heat sink effect of the copper-filled thermal structures, we compared the DC characteristics such as the threshold voltage, transconductance, saturation current, and breakdown voltage. Finally, we estimated and compared the lattice temperature of a two-dimensional electron gas channel, the vertical lattice temperature near the drain-side gate head edge, and the transient thermal analysis for the copper-filled thermal trench and via structures. Through this study, we could optimize the operational characteristics of the device by applying an effective heat dissipation structure to the AlGaN/GaN HEMT.

DC Characteristics of AlGaN/GaN High-Electron Mobility Transistor with a Bottom Plate Connected to Source-Bridged Field Plate Structure.

We investigate DC characteristics of AlGaN/GaN high-electron mobility transistors by using a source-bridged field plate and additional bottom plate (BP) structure. The analysis of experimental data was performed with a two-dimensional simulator. Source connected BP structure stabilized threshold voltage and transconductance regardless of various drain voltages. The effect of BP location was also analyzed, which had optimal DC values because of the dependence of breakdown voltage and drain current of the device on BP position between gate and drain. Finally, the optimum distance of 0.8 µm from drain side gate head edge to BP was achieved for optimum DC characteristics and the highest breakdown voltage of 341 V.