Effect of Chicken Age on Proliferation and Differentiation Abilities of Muscle Stem Cells and Nutritional Characteristics of Cultured Meat Tissue.

This study aimed to investigate effects of chicken age on proliferation and differentiation capacity of muscle satellite cells (MSCs) and to determine total amino acid contents of cultured meat (CM) produced. Chicken MSCs (cMSCs) were isolated from hindlimb muscles of broiler chickens at 5-week-old (5W) and 19-embryonic-day (19ED), respectively. Proliferation abilities (population doubling time and cell counting kit 8) of cMSCs from 19ED were significantly higher than those from 5W (p<0.05). Likewise, both myotube formation area and expression of myosin heavy chain heavy of cMSCs from 19ED were significantly higher than those from 5W (p<0.05). After cMSCs were serially subcultured for long-term cultivation in 2D flasks to produce cultured meat tissue (CMT), total amino acid contents of CMT showed no significant difference between 5W and 19ED chickens (p>0.05). This finding suggests that cMSCs from chicken embryos are more suitable for improving the production efficiency of CM than those derived from young chickens.

Trends in Hybrid Cultured Meat Manufacturing Technology to Improve Sensory Characteristics.

The projected growth of global meat production over the next decade is attributed to rising income levels and population expansion. One potentially more pragmatic approach to mitigating the adverse externalities associated with meat production involves implementing alterations to the production process, such as transitioning to cultured meat, hybrid cultured meat, and meat alternatives. Cultured meat (CM) is derived from animal stem cells and undergoes a growth and division process that closely resembles the natural in vivo cellular development. CM is emerging as a widely embraced substitute for traditional protein sources, with the potential to alleviate the future strain on animal-derived meat production. To date, the primary emphasis of cultured meat research and production has predominantly been around the ecological advantages and ethical considerations pertaining to animal welfare. However, there exists substantial study potential in exploring consumer preferences with respect to the texture, color, cuts, and sustainable methodologies associated with cultured meat. The potential augmentation of cultured meat's acceptance could be facilitated through the advancement of a wider range of cuts to mimic real muscle fibers. This review examines the prospective commercial trends of hybrid cultured meat. Subsequently, the present state of research pertaining to the advancement of scaffolding, coloration, and muscle fiber development in hybrid cultured meat, encompassing plant-based alternatives designed to emulate authentic meat, has been deliberated. However, this discussion highlights the obstacles that have arisen in current procedures and proposes future research directions for the development of sustainable cultured meat and meat alternatives, such as plant-based meat production.

P300 Brain-Computer Interface-Based Drone Control in Virtual and Augmented Reality.

Since the emergence of head-mounted displays (HMDs), researchers have attempted to introduce virtual and augmented reality (VR, AR) in brain-computer interface (BCI) studies. However, there is a lack of studies that incorporate both AR and VR to compare the performance in the two environments. Therefore, it is necessary to develop a BCI application that can be used in both VR and AR to allow BCI performance to be compared in the two environments. In this study, we developed an opensource-based drone control application using P300-based BCI, which can be used in both VR and AR. Twenty healthy subjects participated in the experiment with this application. They were asked to control the drone in two environments and filled out questionnaires before and after the experiment. We found no significant (p > 0.05) difference in online performance (classification accuracy and amplitude/latency of P300 component) and user experience (satisfaction about time length, program, environment, interest, difficulty, immersion, and feeling of self-control) between VR and AR. This indicates that the P300 BCI paradigm is relatively reliable and may work well in various situations.

Melatonin for the prevention of fetal injury associated with intrauterine inflammation.

Intrauterine inflammation is shown to be associated with preterm birth, fetal inflammatory response syndrome, and other pregnancy-related comorbidities such as central nervous system diseases including cerebral palsy and periventricular leukomalacia, pulmonary diseases such as bronchopulmonary dysplasia and respiratory distress syndrome, and necrotizing enterocolitis, to name a few. Many animal studies on intrauterine inflammation demonstrate that ascending infection of reproductive organs or the production of proinflammatory cytokines by some stimuli in utero results in such manifestations. Melatonin, known for its primary function in maintaining circadian rhythm, is now recognized as one of the most potent antioxidant and anti-inflammatory drugs. In some studies, melatonin injection in pregnant animals with intrauterine inflammation significantly reduced the number of preterm births, the severity of structural disintegration of the fetal lungs observed in bronchopulmonary dysplasia, and perinatal brain injuries with improvement in neuromotor function. These implicated benefits of melatonin in pregnant women with intrauterine inflammation seem promising in many research studies, strongly supporting the hypothesis that melatonin has antioxidative and anti-inflammatory properties that can potentially be taken by pregnant women who are at risk of having intrauterine inflammation. In this review, the potential of melatonin for improving outcomes of the pregnancies with intrauterine inflammation will be discussed.

GeTe-Based Alloy Films Prepared by a Room Temperature Solution Process.

This article describes the preparation of GeTe-based alloy films using a solution-based technique. The dissolution behavior of GeTe was initially examined by comparing the weight loss of GeTe powder in different solvents, and it was found that, unlike in the cases of n-butylamine and NH4OH, KOH fully dissolved GeTe to form an agglomerate-free solution. X-ray diffraction analysis revealed that the reaction between GeTe and KOH resulted in the formation of rhombohedral GeTe, cubic GeTe4, and hexagonal Te structures after drying. GeTe-based alloy films were then prepared by the spin coating of the GeTe-containing solutions on a silicon substrate. The surface morphology and reflectance properties of the prepared films were found to be highly dependent on the spin speed, with optimization of the spin coating parameter resulting in the deposition of a continuous and smooth film.

Decrease of 14-3-3 proteins by glutamate exposure in the cerebral cortex of newborn rats.

Glutamate is a representative excitatory neurotransmitter. However, excessive glutamate exposure causes neuronal cell damage by generating neuronal excitotoxicity. Excitotoxicity in neonates caused by glutamate treatment induces neurological deficits in adults. The 14-3-3 family proteins are conserved proteins that are expressed ubiquitously in a variety of tissues. These proteins contribute to cellular processes, including signal transduction, protein synthesis, and cell cycle control. We proposed that glutamate induces neuronal cell damage by regulating 14-3-3 protein expression in newborn animals. In this study, we investigated the histopathological changes and 14-3-3 proteins expressions as a result of glutamate exposure in the neonatal cerebral cortex. Rat pups at post-natal day 7 were intraperitoneally administrated with vehicle or glutamate (10 mg/kg). Animals were sacrificed 4 h after treatment, and brain tissues were fixed for histological study. Cerebral cortices were isolated and frozen for proteomic study. We observed serious histopathological damages including shrunken dendrites and atypical neurons in glutamate-treated cerebral cortices. In addition, we identified that 14-3-3 family proteins decreased in glutamate-exposed cerebral cortices using a proteomic approach. Moreover, Western blot analysis provided results that glutamate treatment in neonates decreased 14-3-3 family proteins expressions, including the ß/α, ζ/δ, γ, ε, τ, and η isoforms. 14-3-3 proteins are involved in signal transduction, metabolism, and anti-apoptotic functions. Thus, our findings suggest that glutamate induces neonatal neuronal cell damage by modulating 14-3-3 protein expression.

Evaluation of Bioabsorbable Mg-Mn Alloy with Anodic Oxidation Treatment.

Magnesium alloys as biodegradable materials have been examined that may replace bone screws and plates in recent studies. But the velocity control of magnesium alloy is very difficult. Until now, the magnesium alloys degrade very fast, thus it couldn't maintain the function in clinical field. Thus the purpose of this study is to evaluate the degradability of anodized magnesium alloy for control the velocity. For this experiment, a Mg-xMn (x = 0, 0.5, 1 wt%) binary alloy was cast in argon gas (99.99%) atmosphere. The specimens of the surface treatment group were anodized for 15 minutes at a voltage of 120 V at room temperature using calcium gluconate, sodium hexametaphosphate, and sodium hydroxide electrolyte. For the mechanical test, SEM, roughness test, hardness test were examined. The degradation test was conducted to measure the hydrogen gas formation volume. For biologic test, cell viability were tested. After anodic oxidation treatment, the surface showed the crater formation, the size of craters were about 200~300 nm. Among nonanodized group, the Mg-0.5Mn showed the highest Vickers hardness and cell viability. However for biodegradability test, Mg-1Mn showed the lowest the hydrogen gas formation. For anodic oxidation treatment, anodic oxidation treatment makes rougher surface, higher hardness, good cell response and lower degradation rate. Overall, anodized Mg-1Mn showed the possibility for clinical application in bone screw and bone plate.

Optimized hybrid endoscopic submucosal dissection for colorectal tumors: a randomized controlled trial.

BACKGROUND AND AIMS: Colorectal endoscopic submucosal dissection (ESD) is difficult and time consuming. Optimization of ESD with snaring (optimized hybrid ESD) may shorten the procedure time. The purpose of this study was to prospectively compare ESD and optimized hybrid ESD in the colorectum. METHODS: We prospectively enrolled 70 patients with colorectal neoplasia ≥20 mm. The patients were randomized to receive either ESD (36 patients) or optimized hybrid ESD (34 patients). In the optimized hybrid ESD group, snare resection was performed after an adequate amount of submucosal dissection. The primary outcome was procedure time. Secondary outcomes were en bloc and complete resection rates and adverse event rates. RESULTS: ESD could not be completed in 5 patients (13.9%) in the ESD group because of technical difficulties. We tried hybrid ESD to finish the resection, and en bloc resection was achieved in 4 patients (80%). The mean procedure time was shorter in the optimized hybrid ESD group compared with the ESD group (27.4 vs 40.6 minutes; P = .005). The en bloc resection rates were similar (94.1% vs 100%; P = .493), as were the complete resection rates (91.2% vs 93.5%; P > .999) and perforation rates (3 patients [8.8%] vs 2 patients [6.5%]; P > .999). CONCLUSIONS: Optimized hybrid ESD achieves shorter procedure times than ESD, with similar en bloc resection rates and adverse event rates. Optimized hybrid ESD in the colorectum may offer an easy alternative to colorectal ESD and a rescue method for failed ESD cases. ( CLINICAL TRIAL REGISTRATION NUMBER: NCT01944540.).

Fabrication and Characterization of Copper-Based Nanoparticles for Transparent Solar Cell Applications.

This paper reports on the fabrication of copper-based nanoparticles using microemulsions, and their optical properties for use in transparent solar cell applications. Microemulsions, containing pure copper nanoparticles, were prepared using the reaction process of CuCl2 with KBH4. We have confirmed that various sized copper nanoparticles, with a radius of up to 10 nm, form within an aqueous concentration of CuCl2 ≤ 2.0 M. Using microstructural observation, we found that parts of pure copper nanoparticles, synthesized in microemulsions, oxidize into cuprous oxide and agglomerate with one another in a normal atmosphere. The copper-based particles were then transferred to substrates by using a spin-coating process. Variations in spin speed led to significant changes in the transmittance and reflectance of the spin-coated particles. Transparent and anti-reflective properties of the particles were obtained at an optimum condition of spin speed. This suggests that the fabrication of the copper-based nanoparticles can be effectively applied to the manufacturing of transparent solar cells.

Spectral entropy for assessing the depth of propofol sedation.

BACKGROUND: For patients in the intensive care unit (ICU) or under monitored anesthetic care (MAC), the precise monitoring of sedation depth facilitates the optimization of dosage and prevents adverse complications from underor over-sedation. For this purpose, conventional subjective sedation scales, such as the Observer's Assessment of Alertness/Sedation (OAA/S) or the Ramsay scale, have been widely utilized. Current procedures frequently disturb the patient's comfort and compromise the already well-established sedation. Therefore, reliable objective sedation scales that do not cause disturbances would be beneficial. We aimed to determine whether spectral entropy can be used as a sedation monitor as well as determine its ability to discriminate all levels of propofol-induced sedation during gradual increments of propofol dosage. METHODS: In 25 healthy volunteers undergoing general anesthesia, the values of response entropy (RE) and state entropy (SE) corresponding to each OAA/S (5 to 1) were determined. The scores were then analyzed during each 0.5 mcg/ml- incremental increase of a propofol dose. RESULTS: We observed a reduction of both RE and SE values that correlated with the OAA/S (correlation coefficient of 0.819 in RE-OAA/S and 0.753 in SE-OAA/S). The RE and SE values corresponding to awake (OAA/S score 5), light sedation (OAA/S 3-4) and deep sedation (OAA/S 1-2) displayed differences (P < 0.05). CONCLUSIONS: The results indicate that spectral entropy can be utilized as a reliable objective monitor to determine the depth of propofol-induced sedation.

A case of back pain caused by Salmonella spondylitis -A case report-.

Salmonella spondylitis is a rare illness, and it generally occurs in patients who have already had sickle cell anemia, and it is even rarer in patients who are without sickle cell anemia. A 61-year-old male patient was hospitalized for the evaluation of his renal function and then treatment was started for his back pain. His back pain had developed about 2 months previously without any specific trauma. Only a bulging disc was detected on the initial lumbar MRI. Regarding his fever, it was diagnosed as possible atypical pneumonia, scrub typhus, etc., and multiple antibiotic therapy was administered. At the time of transfer, the leucocytes and hs-CRP were normal and the ESR was elevated. A diagnostic epidural block was performed for his back pain, but his symptoms were not improved. Lumbar MRI was performed again and it showed findings of infective spondylitis. Salmonella D was identified on the abscess culture and so he was diagnosed as suffering from Salmonella spondylitis. After antibiotic treatment, his back pain was improved and the patient was able to walk.

Shear bond strength of composite resin to titanium according to various surface treatments.

STATEMENT OF PROBLEM: When veneering composite resin-metal restoration is prepared, the fact that bond strength between Ti and composite resin is relatively weak should be considered. PURPOSE: The purpose of this study is to evaluate the shear bond strength between the veneering composite resin and commercial pure (CP) Ti / Ti-6Al-4V alloy according to the method of surface treatment. MATERIAL AND METHODS: The disks were cast by two types of metal. Their surfaces were treated by sandblasting, metal conditioner, TiN coating and silicoating respectively. After surface treatment, the disks were veneered by composite resin (Tescera™, Bisco, USA) which is 5 mm in diameter and 3 mm in thickness. The specimens were stored in water at 25℃ for 24 hours, and then evaluated for their shear bond strength by universal testing machine (STM-5®, United Calibration, USA). These values were statistically analyzed. RESULTS: 1. All methods of surface treatment were used in this study satisfied the requirements of ISO 10477 which is the standard of polymer-based crown and bridge materials. 2. The metal conditioner treated group showed the highest value in shear bond strength of CP Ti, silicoated group, TiN coated group, sandblasted group, in following order. 3. The silicoated group showed the highest value in shear bond strength of Ti-6Al-4V alloy, metal conditioner treated group, sandblasted group, TiN coated group, in following order. CONCLUSION: Within the limitations of this study, all methods of surface treatment used in this study are clinically available.