Palmar reconstruction using full-thickness skin grafts from the groin and lateral malleolus regions: A comparison of long-term outcomes.

Using the skin of the lateral malleolus region for reconstruction of smaller areas of the palm may yield better outcomes than using the skin of the groin region. However, no previous study has provided long-term data comparing the groin and lateral malleolus regions as donor sites for full-thickness skin grafts (FTSGs) in palmar reconstruction. Therefore, this study aimed to compare the groin and lateral malleolus regions as donor sites for FTSGs in palmar reconstruction over a long-term follow-up period. The patients were classified into groin and lateral malleolus region groups (n = 15 each). Measurements were obtained at the graft site, the contralateral site corresponding to the graft site, and the donor site. A chromameter was used to measure skin color, and the Patient and Observer Scar Assessment Scale (POSAS) was used to evaluate the scar at the skin graft site. Compared to the groin region group, the lateral malleolus region group showed skin colors that were closer to the original color of the palm in terms of lightness and red/green values. Additionally, the lateral malleolus region group received better esthetic ratings in the POSAS. Our results revealed that using the lateral malleolus region for FTSGs in palmar reconstruction resulted in better outcomes than using the groin region, even over a long period.

Solitary fibrous tumor in the temporalis muscle: a case report and literature review.

Solitary fibrous tumor (SFT) is an infrequently occurring neoplasm most commonly observed in the pleura, but it can develop in the head and neck region in occasional cases. However, no reports have described SFT in the temporalis muscle. Herein, we present the first known case of SFT in the temporalis muscle. A 47-year-old man complained of a painless palpable mass on his right temple. Facial enhanced computed tomography identified a 4.0× 2.9× 1.4 cm mass presenting as a vascular tumor in the right temporalis muscle under the zygomatic arch. The mass was excised from the right temporalis muscle under general anesthesia. A histopathologic examination revealed that the mass was an SFT. No complications occurred after surgery, including functional disability or sensory loss. The patient was followed up for 3 months without complications. Although SFT in extrapulmonary regions is rare, it should be considered in the differential diagnosis of masses that occur in the temporal area.

Relationship between midfacial fractures and maxillary sinus pathology.

BACKGROUND: Midfacial fractures frequently involve the maxillary sinus, leading to maxillary sinus pathology. We aimed to examine the incidence and contributing factors of maxillary sinus pathology in patients who underwent open reduction and internal fixation (ORIF) for midfacial fractures. METHODS: A retrospective analysis was conducted on patients who underwent ORIF for midfacial fractures at our department over the past 10 years. The incidence of maxillary sinus pathology was identified clinically and/or by computed tomography findings. Factors that significantly influenced the groups with and without maxillary sinus pathology were examined. RESULTS: The incidence of maxillary sinus pathology in patients who underwent ORIF for midfacial fractures was found to be 11.27%, with sinusitis being the most common pathology. Maxillary sinus pathology was significantly associated with the presence of a blowout fracture involving both the medial and the inferior orbital walls. Factors such as sex, age, diabetes mellitus, hypertension, smoking, inflammatory disease, follow-up period, use of absorbable plates, and use of titanium plates did not have a significant impact on the development of maxillary sinus pathology. CONCLUSION: The incidence of maxillary sinus pathology in patients who underwent ORIF for midfacial fractures was relatively low, and in most cases, it resolved without the need for specific treatment. Consequently, there may not be a significant need for concern regarding postoperative maxillary sinus pathology.

Myxoid pleomorphic liposarcoma in the teres minor muscle: A case report.

RATIONALE: Myxoid pleomorphic liposarcoma (MPL) is a rare aggressive adipocytic tumor that mainly presents in children and adolescents. It is most frequently observed in the mediastinum and rarely in the head and neck, perineal region, or back. Herein, we report the first published case of MPL of the teres minor muscle. PATIENT CONCERNS: A 24-years-old woman presented with a painless palpable mass in her right shoulder. DIAGNOSES: Magnetic resonance imaging identified a 9.0 × 7.0 × 4.0 cm mass suspected to be a sarcoma in the teres minor muscle. Positron emission tomography/computed tomography revealed no evidence of distant metastasis. Histopathological examination revealed the mass to be an MPL, which was assigned a histologic grade of 3 according to the French Federation of Cancer Centers Sarcoma Group system. No tumor cells were observed along the resected margins. INTERVENTIONS: Under general anesthesia, the right teres minor muscle containing the mass was excised en bloc and frozen biopsy confirmed that the tumor cells did not invade the surrounding tissues. OUTCOMES: The patient underwent radiotherapy and was followed up for 6 months without complications. LESSONS: Although MPL in the teres minor muscle is rare, it should be considered in the differential diagnosis in patients with a mass in the teres minor muscle due to its poor prognosis.

Sealing Ability of AH Plus and GuttaFlow Bioseal.

The objective of root canal obturation is to achieve a fluid-tight seal. Recently, GuttaFlow bioseal (GB), a root canal sealer composed of polydimethylsiloxane, gutta-percha particles, and bioactive glass ceramics, has been developed, to enhance the sealing ability of root canal filling material. The objective of this study was to assess the sealing ability of GB using a subnanoliter-scaled fluid-flow measuring device and to compare with that of AH Plus (AH). The fluid flow in root canal-filled teeth using either gutta-percha cone (GP) with AH (GAR; n = 10) or GP with GB (GBR; n = 10) and in GP inserted in AH blocks (GA; n = 10) or GP inserted in GB blocks (GB; n = 10) was measured. In addition, fluid flow in sealer blocks of AH (A; n = 10) and GB (B; n = 10), which served as negative controls, was measured. Root canal-filled teeth using GP without any sealer (GR) acted as positive controls (n = 10). The leakage was obtained by calculating the volume of moved water by time (s), after stabilization of the fluid flow was achieved. Statistical analysis was performed using the Kruskal-Wallis test and Mann-Whitney U-test with Bonferroni correction. A p value less than 0.00238 (0.05/21) was considered significantly different. The mean leakages (nL/s) in the groups are as follows: GAR, 0.0958 ± 0.0543; GBR, 0.0223 ± 0.0246; GA, 0.0644 ± 0.0803; GB, 0.0267 ± 0.0182; A, 0.0055 ± 0.0057; B, 0.0052 ± 0.005; and GR, 0.2892 ± 0.3018. The mean leakage in the GBR group was lower than that in the GAR group (p = 0.001), while the mean leakages in the GA and GB groups were not significantly different. GuttaFlow bioseal can be useful in single-cone obturation technique.

Torsional and Bending Properties of V Taper 2H, ProTaper NEXT, NRT, and One Shape.

Nickel-titanium (NiTi) rotary files have enabled efficient root canal preparations that maintain the canal center with fewer aberrations compared to hand files. However, NiTi rotary files are susceptible to fracture, which can thereby compromise root canal treatment. Therefore, NiTi files have been developed to enhance fracture resistance by modifying design and thermal treatment. The objective of this study was to compare the torsional fatigue resistance and bending resistance of NiTi files manufactured from different alloys and treatments. ProTaper NEXT X2 (PTN; M-wire), V taper 2H (V2H; controlled memory wire), NRT (heat-treated), and One Shape (OS; conventional alloy) instruments of tip size #25 were compared. Torsional fatigue was evaluated by embedding the 3 mm tip of each instrument (N = 10/brand) in resin and the repetitive application of torsional stress (300 rpm, 1.0 N·cm) by an endodontic motor with autostop when the file fractured. The number of loading cycles to fracture was recorded and analyzed by Kruskal-Wallis and Mann-Whitney U tests with Bonferroni's correction. Bending resistance of the instruments was tested using a cantilever bending test to the 3 mm point from the tip (N = 10/brand). The stress was measured when deflection of 3 mm was subjected and statistically analyzed with a one-way analysis of variance and Tukey's honest significance difference test (α = 0.05). V2H withstood the highest number of load applications during torsional fatigue testing (p < 0.05), followed by NRT, PTN, and OS, where the differences between NRT and PTN (p=0.035) and between PTN and OS (p=0.143) were not statistically significant. V2H showed the lowest bending stiffness, followed by NRT, PTN, and OS (p < 0.001). Thermal treatment of NiTi wire resulted in improved mechanical properties, and controlled memory wire provided improved flexibility and torsional fatigue resistance.