Efficient Synthesis of 2D Mica Nanosheets by Solvothermal and Microwave-Assisted Techniques for CO2 Capture Applications.

Mica, a commonly occurring mineral, has significant potential for various applications due to its unique structure and properties. However, due to its non-Van Der Waals bonded structure, it is difficult to exfoliate mica into ultrathin nanosheets. In this work, we report a rapid solvothermal microwave synthesis of 2D mica with short reaction time and energy conservation. The resulting exfoliated 2D mica nanosheets (eMica nanosheets) were characterized by various techniques, and their ability to capture CO2 was tested by thermogravimetric analysis (TGA). Our results showed an 87% increase in CO2 adsorption capacity with eMica nanosheets compared to conventional mica. Further characterization by Fourier-transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS), as well as first-principles calculations, showed that the high specific surface area and deposited K2CO3 layer contribute to the increased CO2 adsorption on the mica nanosheets. These results speak to the potential of high-quality eMica nanosheets and efficient synthesis processes to open new avenues for new physical properties of 2D materials and the development of CO2 capture technologies.

Origin of observed narrow bandgap of mica nanosheets.

Mica nanosheets possess peculiar feature of narrowed bandgap with the decrease of thickness but a conclusive theoretical understanding of the narrowing mechanisms is still under development. In this report, first-principles calculations were carried out to investigate the electronic band structure of mica nanosheets with the deposition of K2CO3. Bulk mica shows an indirect bandgap of 4.90 eV. Mica nanosheets show similar electronic structures to bulk mica with a gradually increased bandgap of 4.44 eV, 4.52 eV and 4.67 eV for 1-layer, 2-layers and 3-layers nanosheets, respectively, which is attributed to the lattice relaxation. K2CO3 is found to have strong affinity towards mica nanosheets. The K2CO3 deposited mica nanosheets showed an increased bandgap with the increase of thickness, consistent with experimental observations. The calculated bandgap of K2CO3 deposited mica for 2-layers and 3-layers nanosheets are 2.60 eV and 2.75 eV, respectively, which are comparable with the corresponding experimental values of 2.5 eV and 3.0 eV. Our theoretical findings support the experimental evidence of surface contamination of mica by K2CO3, and provide new insight into the structure and properties of 2D mica.

Morphology Design and Fabrication of Bio-Inspired Nano-MgO-Mg(OH)2 via Vapor Steaming to Enable Bulk CO2 Diffusion and Capture.

The absorption of CO2 on MgO is being studied in depth in order to enhance carbon engineering. Production of carbonate on MgO surfaces, such as MgCO3, for example, has been shown to hinder further carbon lattice transit and lower CO2 collecting efficiency. To avoid the carbonate blocking effect, we mimic the water harvesting nano-surface systems of desert beetles, which use alternate hydrophobic and hydrophilic surface domains to collect liquid water and convey condensed droplets down to their mouths, respectively. We made CO2-philic MgO and CO2-phobic Mg(OH)2 nanocomposites from electrospun nano-MgO by vapor steaming for 2-20 min at 100 °C. The crystal structure, morphology, and surface properties of the produced samples were instrumentally characterized using XRD, SEM, XPS, BET, and TGA. We observed that (1) fiber morphology shifted from hierarchical particle and sheet-like structures to flower-like structures, and (2) CO2 capture capacity shifted by around 25%. As a result, the carbonate production and breakdown processes may be managed and improved using vapor steaming technology. These findings point to a new CO2 absorption technique and technology that might pave the way for more CO2 capture, mineralization, and fuel synthesis options.

Proton-Functionalized Graphitic Carbon Nitride for Efficient Metal-Free Destruction of Escherichia coli under Low-Power Light Irradiation.

Universal access to clean water has been a global ambition over the years. Photocatalytic water disinfection through advanced oxidation processes has been regarded as one of the promising methods for breaking down microbials. The forefront of this research focuses on the application of metal-free photocatalysts for disinfection to prevent secondary pollution. Graphitic carbon nitride (g-C3 N4 ) has achieved instant attention as a metal-free and visible-light-responsive photocatalyst for various energy and environmental applications. However, the photocatalytic efficiency of g-C3 N4 is still affected by its rapid charge recombination and sluggish electron-transfer kinetics. In this contribution, two-dimensionally protonated g-C3 N4 was employed as metal-free photocatalyst for water treatment and demonstrated 100 % of Escherichia coli within 4 h under irradiation with a 23 W light bulb. The introduction of protonation can modulate the surface charge of g-C3 N4 ; this enhances its conductivity and provides a "highway" for the delocalization of electrons. This work highlights the potential of conjugated polymers in antibacterial application.

Nitrogen-doped carbon quantum dots-decorated 2D graphitic carbon nitride as a promising photocatalyst for environmental remediation: A study on the importance of hybridization approach.

Growing concerns of water pollution by dye pollutants from the textile industry has led to vast research interest to find green solutions to address this issue. In recent years, heterogeneous photocatalysis has harvested tremendous attention from researchers due to its powerful potential applications in tackling many important energy and environmental challenges at a global level. To fully utilise the broad spectrum of solar energy has been a common aim in the photocatalyst industry. This study focuses on the development of an efficient, highly thermal and chemical stable, environmentally friendly and metal-free graphitic carbon nitride (g-C3N4) to overcome the problem of fast charge recombination which hinders photocatalytic performances. Nitrogen-doped carbon quantum dots (NCQDs) known for its high electronic and optical functionality properties is believed to achieve photocatalytic enhancement by efficient charge separation through forming heterogeneous interfaces. Hence, the current work focuses on the hybridisation of NCQDs and g-C3N4 to produce a composite photocatalyst for methylene blue (MB) degradation under LED light irradiation. The optimal hybridisation method and the mass loading required for maximum attainable MB degradation were systematically investigated. The optimum photocatalyst, 1 wt% NCQD/g-C3N4 composite was shown to exhibit a 2.6-fold increase in photocatalytic activity over bare g-C3N4. Moreover, the optimum sample displayed excellent stability and durability after three consecutive degradation cycles, retaining 91.2% of its original efficiency. Scavenging tests were also performed where reactive species, photon-hole (h+) was identified as the primary active species initiating the pollutant degradation mechanism. The findings of this study successfully shed light on the hybridisation methods of NCQDs which improve existing g-C3N4 photocatalyst systems for environmental remediation by utilising solar energy.

Two-dimensional bismuth oxybromide coupled with molybdenum disulphide for enhanced dye degradation using low power energy-saving light bulb.

In the present work, two-dimensional bismuth oxybromide (BiOBr) was synthesized and coupled with co-catalyst molybdenum disulphide (MoS2) via a simple hydrothermal process. The photoactivity of the resulting hybrid photocatalyst (MoS2/BiOBr) was evaluated under the irradiation of 15 W energy-saving light bulb at ambient condition using Reactive Black 5 (RB5) as model dye solution. The photo-degradation of RB5 by BiOBr loaded with 0.2 wt% MoS2 (MoBi-2) exhibited more than 1.4 and 5.0 folds of enhancement over pristine BiOBr and titanium dioxide (Degussa, P25), respectively. The increased photocatalytic performance was a result of an efficient migration of excited electrons from BiOBr to MoS2, prolonging the electron-hole pairs recombination rate. A possible charge transfer diagram of this hybrid composite photocatalyst, and the reaction mechanism for the photodegradation of RB5 were proposed.