Semi-rational evolution of ω-transaminase from Aspergillus terreus for enhancing the thermostability / 生物工程学报

ω-transaminase (ω-TA) is a natural biocatalyst that has good application potential in the synthesis of chiral amines. However, the poor stability and low activity of ω-TA in the process of catalyzing unnatural substrates greatly hampers its application. To overcome these shortcomings, the thermostability of (R)-ω-TA (AtTA) from Aspergillus terreus was engineered by combining molecular dynamics simulation assisted computer-aided design with random and combinatorial mutation. An optimal mutant AtTA-E104D/A246V/R266Q (M3) with synchronously enhanced thermostability and activity was obtained. Compared with the wild- type (WT) enzyme, the half-life t1/2 (35 ℃) of M3 was prolonged by 4.8-time (from 17.8 min to 102.7 min), and the half deactivation temperature (T1050) was increased from 38.1 ℃ to 40.3 ℃. The catalytic efficiencies toward pyruvate and 1-(R)-phenylethylamine of M3 were 1.59- and 1.56-fold that of WT. Molecular dynamics simulation and molecular docking showed that the reinforced stability of α-helix caused by the increase of hydrogen bond and hydrophobic interaction in molecules was the main reason for the improvement of enzyme thermostability. The enhanced hydrogen bond of substrate with surrounding amino acid residues and the enlarged substrate binding pocket contributed to the increased catalytic efficiency of M3. Substrate spectrum analysis revealed that the catalytic performance of M3 on 11 aromatic ketones were higher than that of WT, which further showed the application potential of M3 in the synthesis of chiral amines.

Increasing the thermostability of glutamate decarboxylase from Lactobacillus brevis by introducing proline / 生物工程学报

Glutamate decarboxylase, a unique pyridoxal 5'-phosphate-dependent enzyme, catalyzes α-decarboxylation of L-glutamate to γ-aminobutyrate. However, glutamate decarboxylase from different sources has the common problem of poor thermostability that affects its application in industry. In this study, proline was introduced at 13 different positions in glutamate decarboxylase by using the design strategy of homologous sequence alignment between Thermococcus kodakarensis and Lactobacillus brevis CGMCC No.1306. A mutant enzyme G364P with higher thermostability was obtained. Compared to the wild type, thermostability of the mutant G364P was significantly improved, the half-life time (t1/2) at 55 °C and the semi-inactivation temperature (T₅₀ ¹⁵) of the mutant G364P increased 19.4 min and 5.3 °C, respectively, while kcat/Km of the mutant enzyme remained nearly unchanged. Further analysis of their thermostability by molecular dynamics simulations were performed. The root mean square deviation of G364P and root mean square fluctuation in the loop region including G364 were lower than the wild type at 313 K for 10 ns, and G364P increased one hydrophobic interaction in the loop region. It proves that mutation of flexible 364-Gly to rigid proline endows glutamate decarboxylase with enhanced thermostability.

Deletion of a dynamic surface loop improves thermostability of (R)-selective amine transaminase from Aspergillus terreus / 生物工程学报

Chiral amines are important building blocks for the synthesis of pharmaceutical products and fine chemicals. Highly stereoselective synthesis of chiral amines compounds through asymmetric amination has attracted more and more attention. ω-transaminases (ω-TAs) are a promising class of natural biocatalysts which provide an efficient and environment-friendly access to production of chiral amines with stringent enantioselectivity and excellent catalytic efficiency. Compared with (S)-ω-TA, the research focused on (R)-ω-TA was relatively less. However, increasing demand for chiral (R)-amines as pharmaceutical intermediates has rendered industrial applications of (R)-ω-TA more attractive. Improving the thermostability of (R)-ω-TA with potential biotechnological application will facilitate the preparation of chiral amines. In this study, the dynamic surface loop with higher B-factor from Aspergillus terreus (R)-ω-TA was predicted by two computer softwares (PyMOL and YASARA). Then mutant enzymes were obtained by deleting amino acid residues of a dynamic surface loop using site-directed mutagenesis. The results showed that the best two mutants R131del and P132-E133del improved thermostability by 2.6 ℃ and 0.9 ℃ in T₅₀¹⁰ (41.1 ℃ and 39.4 ℃, respectively), and 2.2-fold and 1.5-fold in half-life (t1/2) at 40 ℃ (15.0 min and 10.0 min, respectively), compared to that of wild type. Furtherly, the thermostability mechanism of the mutant enzymes was investigated by molecular dynamics (MD) simulation and intermolecular interaction analysis. R131del in the loop region has lower root mean square fluctuation (RMSF) than the wild type at 400 K for 10 ns, and mutant enzyme P132-E133del increases four hydrogen bonds in the loop region. In this study, we obtain two stability-increased mutants of (R)-ω-TA from A. terreus by deleting its dynamic surface loop and also provide methodological guidance for the use of rational design to enhance the thermal stability of other enzymes.

Kinetic and thermodynamic studies of sulforaphane adsorption on macroporous resin.

The adsorption equilibrium, kinetic and thermodynamic of sulforaphane (SF) adsorption onto macroporous resin in aqueous phase were studied. The SP850 resin was screened as the appropriate resin for SF purification. From the equilibrium studies, the Redlich-Peterson model was found to be the best for description of the adsorption behavior of SF onto SP850 resin, followed by the Freundlich model and the Langmuir model. Batch equilibrium experiments demonstrated that, in the examined temperature range, the equilibrium adsorption capacity of SP850 resin decreased with increasing adsorption temperature. Thermodynamics studies indicated that the adsorption of SF was a physical, exothermic, and spontaneous process. The adsorption kinetics revealed that the pseudo-second-order kinetic model was suitable to characterize the kinetics of adsorption of SF onto SP850. Finally, the intra-particle diffusion model demonstrated that SF diffused quickly into macropores, and that diffusion slowed down in the meso- and micropores.

Enhancing glutamate decarboxylase activity by site-directed mutagenesis: an insight from Ramachandran plot / 生物工程学报

Glutamate decarboxylase (GAD) can catalyze the decarboxylation of glutamate into γ-aminobutyrate (GABA) and is the only enzyme of GABA biosynthesis. Improving GAD activity and thermostability will be helpful for the highly efficient biosynthesis of GABA. According to the Ramachandran plot information of GAD 1407 three-dimensional structure from Lactobacillus brevis CGMCC No. 1306, we identified the unstable site K413 as the mutation target, constructed the mutant GAD by site-directed mutagenesis and measured the thermostability and activity of the wide type and mutant GAD. Mutant K413A led to a remarkably slower inactivation rate, and its half-life at 50 °C reached 105 min which was 2.1-fold higher than the wild type GAD1407. Moreover, mutant K413I exhibited 1.6-fold higher activity in comparison with the wide type GAD1407, although it had little improvement in thermostability of GAD. Ramachandran plot can be considered as a potential approach to increase GAD thermostability and activity.

Improving the activity of cytochrome P450 BM-3 catalyzing indole hydroxylation by directed evolution.

Cytochrome P450 BM-3 (A74G/F87V/L188Q) could catalyze indole to produce indigo. To further improve this capability, random mutagenesis was performed on the heme domain of P450 BM-3 (A74G/F87V/L188Q) with error-prone PCR. A single mutant V445A was selected out from the error-prone library and exhibited the highest specific activity toward indole among the mutants obtained. The kinetic parameters of V445A were also highly improved. Compared with the parent enzyme, the turnover rate (k cat) of V445A was increased by 7.5 times, while its K m value decreased by 9.2 %. Consequently, the catalytic efficiency (k cat/K m) of V445A was raised to 8.2 times than that of the parent enzyme. Moreover, alanine was confirmed as the best amino acid substitution by saturated mutagenesis in Val445 position. Three-dimensional structure analysis was also used to rationalize the effect on the enzyme properties of the mutation. This study showed that random mutagenesis was efficient to identify mutants with potential values in industry and increased our insight into P450 BM-3.

Purification of cytochrome P450 BM-3 as a monooxygenase.

After investigating two anion-exchange resins, the purification factor and activity yields of P450 BM-3 were higher with Resource Q than with DEAE-Sepharose FF. Screening of HIC media showed that Source 15ISO was the most suitable for purification of P450 BM-3. An effective isolation and purification procedure of P450 BM-3 was developed and included three steps: 35%-70% saturation (NH(4))(2)SO(4) precipitation, Source 15ISO hydrophobic interaction chromatograph and Sephacryl S-200 gel filtration chromatography. Using this protocol, the purification factor and P450 BM-3 activity recovery was 13.5 and 13.7%, respectively.