Optical and transport properties correlation driven by amorphous/crystalline disorder in InP nanowires.

Indium phosphide nanowires with a single crystalline zinc-blend core and polycrystalline/amorphous shell were grown from a reliable route without the use of hazardous precursors. The nanowires are composed by a crystalline core covered by a polycrystalline shell, presenting typical lengths larger than 10 µm and diameters of 80-90 nm. Raman spectra taken from as-grown nanowires exhibited asymmetric line shapes with broadening towards higher wave numbers which can be attributed to phonon localization effects. It was found that optical phonons in the nanowires are localized in regions with average size of 3 nm, which seems to have the same order of magnitude of grain sizes in the polycrystalline shell. Regardless of the fact that the nanowires exhibit a crystalline core, any considerable degree of disorder can lead to a localized behaviour of carriers. In consequence, the variable range hopping was observed as the main transport instead of the usual thermal excitation mechanisms. Furthermore the hopping length was ten times smaller than nanowire cross-sections, confirming that the nanostructures do behave as a 3D system. Accordingly, the V-shape observed in PL spectra clearly demonstrates a very strong influence of the potential fluctuations on the exciton optical recombination. Such fluctuations can still be observed at low temperature regime, confirming that the amorphous/polycrystalline shell of the nanowires affects the exciton recombination in every laser power regime tested.

LaNiO3 nanotubes produced using a template-assisted method.

We have studied the experimental conditions needed to produce LaNiO3 (LNO) nanostructures using a template-assisted method. In this route, a mesoporous anodic aluminum oxide template was filled with a chemical solution that had been prepared with polymeric precursors route. The precursor solutions and synthesized samples were characterized by X-ray diffraction (XRD), thermogravimetric analysis, infrared spectroscopy and high-resolution scanning electron microscopy (HRSEM). The XRD results for the samples that were heat-treated at 700 degrees C revealed that these samples crystallize in a perovskite-like LaNiO3 structure. HRSEM images revealed that the samples prepared with different deposition times (0.5, 1 and 2 h) promoted the formation of LaNiO3 nanotubes with different wall thicknesses.

Photoluminescence of barium titanate and barium zirconate in multilayer disordered thin films at room temperature.

The emission of wide band photoluminescence showed a synergic effect on barium zirconate and barium titanate thin films in alternate multilayer system at room temperature by 488 nm exiting wavelength. The thin films obtained by spin-coating were annealed at 350, 450, and 550 degrees C for 2 h. The X-ray patterns revealed the complete separation among the BaTiO3 and BaZrO3 phases in the adjacent films. Visible and intense photoluminescence was governed by BaZrO3 thin films in the multilayer system. Quantum mechanics calculations were used in order to simulate ordered and disordered thin films structures. The disordered models, which were built by using the displacement of formers and modifier networks, showed a different symmetry in each system, which is in accordance with experimental photoluminescence emission, thus allowing to establish a correlation among the structural and optical properties of these multilayered systems.

Study of structural and photoluminescent properties of Ca8Eu2(PO4)6O2.

In this work it is presented for the first time the nanostructured hydroxyapatites doped with 0.5, 1.0 and 2.0 wt% of Eu(3+) prepared at room temperature by the mechanical alloying technique. X-ray diffraction powder (XRD), infrared (IR) and Raman scattering spectroscopy, scanning electron microscopy (SEM), microhardness measurements as well as luminescent data of Eu(3+) were used to investigate the structural and optical properties of these nanomaterials. The electrical and dielectrical analyses were used with the intention of having a better comprehension about the electromagnetic fields in pure and doped hydroxyapatites.

Charge density alterations in human hair fibers: an investigation using electrostatic force microscopy.

A new method for high-resolution analyses of hair surface charge density under ambient conditions is presented in this paper. Electrostatic force microscopy (EFM) is used here to analyze changes in surface charge density in virgin hair, bleached hair, and hair treated with a cationic polymer. The atomic force microscopy technique is used concomitantly to analyze morphological changes in hair roughness and thickness. The EFM images depict exactly how the polymer is distributed on the surface of the hair fiber. The EFM's powerful analytical tools enabled us to evaluate the varying degrees of interaction between the hair fiber surface charge density and the cationic polymer. The surface charge density and the polymer's distribution in the hair fibers are presented in the light of EFM measurements.

UV radiation: aggressive agent to the hair--AFM, a new methodology of evaluation.

A new method for morphological hair analysis at high resolution and under ambient conditions is presented in this paper. The AFM has been used in these experiments to analyze morphological changes in hair roughness and thickness after UV radiation. Through the powerful analytical AFM tools, changes in hair morphology can be proven. A new quantitative methodology to evaluate hair structure is presented in this paper.

Synthesis of metal-oxide matrix with embedded nickel nanoparticles by a bottom-up chemical process.

Here we describe a new chemical route for obtaining highly dispersed nanometric Ni particles embedded in different matrices based on Al2O3, MgO, and TiO2 and in the heterogeneous matrices CeO2-doped Al2O3 and MgO-doped Al2O3. The synthesis method is based on a modification of the polymeric precursor method. The Ni nanoparticles (particles in the range of 1-40 nm) were obtained in a single process, without the use of an external reducing agent (hydrogen atmosphere).

Application of Ni:SiO2 nanocomposite to control the carbon deposition on the carbon dioxide reforming of methane.

Stable Ni nanoparticles embedded in a mesoporous silica material were used as catalysts for the conversion of methane into synthesis gas. This catalyst has the singular properties of controlling the carbon deposition and deactivation of active sites. A comparative study of our nanocomposites with conventional catalysts showed that impregnation material presented a preferential encapsulation and growth of carbon nanotubes on the metal surface. The impregnated catalyst showed a higher tendency for carbon nanotube and whiskers formation.

Synthesis of SnO2 nanoribbons by a carbothermal reduction process.

This communication describes, for the first time, the growth of SnO2 nanoribbons by a controlled carbothermal reduction process. An analysis of the transmission electron microscopy image revealed that these nanoribbons have a well-defined shape, with a typical width in the range of 70-300 nm. In general, the nanostructured ribbons were more than 100 microns in length. The results reported here support the hypothesis that this ribbon-like nanostructured material grows by a vapor-solid process. This study introduces two hypotheses to explain the SnO2 nanoribbon growth process.

Synthesis of mesoporous silica with embedded nickel nanoparticles for catalyst applications.

Here we describe a new route for the synthesis of nanometric Ni particles embedded in a mesoporous silica material with excellent potential for catalytic applications. Mesoporous silica with a surface area in the range of 202-280 m2/g, with narrow pore size distribution and Ni nanoparticles (particles in the range of 3-41 nm) were obtained in a direct process. A different approach was adopted to process such a nanocomposite. This new approach is based on the formation of a polymer with the silicon oxianion and nickel cation chelated to the macromolecule structure and on the control of the pyrolysis step. The CO/CO2 atmosphere resulting from the pyrolysis of the organic material promotes the reduction of the Ni citrate.