Substrate Protection with Corrosion Scales: Can We Depend on Iron Carbonate?

Controlling corrosion with naturally occurring corrosion scales is potentially a more environmentally sustainable alternative to current approaches, including dosing of organic corrosion inhibitors. We report operando grazing incidence X-ray diffractograms correlated with electrochemical measurements to elucidate the growth and corrosion protection properties of a corrosion scale composed of FeCO3 crystallites, which is encountered in various key energy industry applications. Data, acquired as a function of time from high-purity iron immersed in CO2-saturated deionized H2O at pH 6.8 and T = 80 °C, show that the FeCO3 scale not only prevents corrosion of the covered substrate but also acts as a significant interfacial diffusion barrier for corrosion reagents and/or products once sufficient coverage is achieved. Most notably, from a corrosion engineering perspective, however, it is determined that corrosion occurring in gaps between scale crystallites remains appreciable; this important insight is gained through the analysis of electrochemical impedance spectra to estimate the variation in electrochemically active surface area as scale coverage increases. These results indicate that naturally occurring FeCO3 scales are not a tenable solution for corrosion protection, as even in their intact state they are highly likely to be, at best, semiprotective.

Smart Functionalization of Ceramic-Coated AZ31 Magnesium Alloy.

Providing materials with smart functionalities such as self-healing properties is primarily a domain for organic materials, although their applicability is restricted to mild environments and loads because of poor thermal and mechanical properties. This work seeks to achieve the active functionalities obtained in organic materials but in ceramics, which are much more heat resistant and robust. Ceramic coatings were produced by plasma electrolytic oxidation (PEO), which is an environmentally friendly technique that offers an alternative to potentially carcinogenic treatments used widely in the automotive and aircraft industries to protect light alloys against corrosion. The active functionalization was achieved by incorporating corrosion inhibitors encapsulated into halloysite nanotubes (HNTs) into the PEO coatings. This allowed controlled release of active agents when detecting environmental pH changes associated with the corrosion initiation of the metal substrate. Three corrosion inhibitors-vanadate, molybdate salts, and 8-hydroxyquinoline (8-HQ)-were assessed within the PEO-HNT system and demonstrated considerable improvements in the corrosion resistance by decreasing the kinetics of both anodic and cathodic reactions. For immersion times up to 72 h, vanadate offered a consistently higher corrosion resistance, which was followed by molybdate, whereas the positive effect of 8-HQ was time-limited. The improvement in corrosion resistance was associated with the combined enhancement of the barrier and active protection properties of ceramic coatings. All coatings containing corrosion inhibitors were capable of providing self-healing to small scratches, whereas only vanadate could partially restore a more severe damage.

Gemini surfactant as multifunctional corrosion and biocorrosion inhibitors for mild steel.

Biocorrosion is an important type of corrosion which leads to economic losses across oil and gas industries, due to increased monitoring, maintenance, and a reduction in platform availability. Ideally, a chemical compound engineered to mitigate against biocorrosion would possess both antimicrobial properties, as well as efficient corrosion inhibition. Gemini surfactants have shown efficacy in both of these properties, however there still remains a lack of electrochemical information regarding biocorrosion inhibition. The inhibition of corrosion and biocorrosion, by cationic gemini surfactants, of carbon steel was investigated. The results showed that the inhibition efficiency of the gemini surfactants was high (consistently >95%), even at low concentrations. Gemini surfactants also showed strong antimicrobial activity, with a minimum inhibitory concentration (0.018 mM). Corrosion inhibition was investigated by electrochemical impedance spectroscopy (EIS) and linear polarisation resistance (LPR), with biocorrosion experiments carried out in an anaerobic environment. Surface morphology was analysed using scanning electron microscopy (SEM).

Post-extraction mesio-distal gap reduction assessment by confocal laser scanning microscopy - a clinical 3-month follow-up study.

AIM: The aim of this 3-month follow-up study is to quantify the reduction in the mesio-distal gap dimension (MDGD) that occurs after tooth extraction through image analysis of three-dimensional images obtained with the confocal laser scanning microscopy (CLSM) technique. MATERIALS AND METHODS: Following tooth extraction, impressions of 79 patients 1 month and 72 patients 3 months after tooth extraction were obtained. Cast models were processed by CLSM, and MDGD changes between time points were measured. RESULTS: The mean mesio-distal gap reduction 1 month after tooth extraction was 343.4 µm and 3 months after tooth extraction was 672.3 µm. The daily mean gap reduction rate during the first term (between baseline and 1 month post-extraction measurements) was 10.3 µm/day and during the second term (between 1 and 3 months) was 5.4 µm/day. CONCLUSIONS: The mesio-distal gap reduction is higher during the first month following the extraction and continues in time, but to a lesser extent. When the inter-dental contacts were absent, the mesio-distal gap reduction is lower. When a molar tooth is extracted or the distal tooth to the edentulous space does not occlude with an antagonist, the mesio-distal gap reduction is larger. The consideration of mesio-distal gap dimension changes can help improve dental treatment planning.

Confocal laser scanning microscopy for the study of the morphological changes of the postextraction sites.

A better understanding of the remodeling process of postextraction sockets is essential in dental treatment planning. The aim of this study was to evaluate whether confocal laser scanning microscopy (CLSM) can be applied to imaging contour changes of postextraction sites, as well as to its quantification with image analysis of obtained three-dimensional images. This work describes a new application of the CLSM technique. The system used was the OLS3100-USS, LEXT model (Olympus®). CLSM was used for the surface analysis of the extraction site. The measurements taken with CLSM were: (1) mesio-distal distance, (2) alveolar ridge thickness, and (3) vestibular and lingual alveolar ridge height. Results of study cast scanning at baseline, 1 and 3 months after tooth extraction, with CLSM are well-detailed images of postextraction areas. The CLSM technique used in study casts is a valid method to measure the dimensional changes that happen in the edentulous area after tooth extraction. This technique allows the evaluation of changes in mesio-distal distance, thickness of the alveolar ridge and alveolar ridge height based on the measurements on the alveolar contours.