Intermixing of MoS2 and WS2 photocatalysts toward methylene blue photodegradation.

Visible-light-driven photocatalysis using layered materials has garnered increasing attention regarding the degradation of organic dyes. Herein, transition-metal dichalcogenides MoS2 and WS2 prepared by chemical vapor deposition as well as their intermixing are evaluated for photodegradation (PD) of methylene blue under solar simulator irradiation. Our findings revealed that WS2 exhibited the highest PD efficiency of 67.6% and achieved an impressive PD rate constant of 6.1 × 10-3 min-1. Conversely, MoS2 displayed a somewhat lower PD performance of 43.5% but demonstrated remarkable stability. The intriguing result of this study relies on the synergetic effect observed when both MoS2 and WS2 are combined in a ratio of 20% of MoS2 and 80% of WS2. This precise blend resulted in an optimized PD efficiency and exceptional stability reaching 97% upon several cycles. This finding underscores the advantageous outcomes of intermixing WS2 and MoS2, shedding light on the development of an efficient and enduring photocatalyst for visible-light-driven photodegradation of methylene blue.

Fouling and non-fouling surfaces produced by plasma polymerization of ethylene oxide monomer.

This paper presents the results of plasma polymerization using diethylene glycol dimethyl ether as a precursor in a capacitively coupled radio frequency system. The chemical structure of the coatings was characterized using several analysis techniques (X-ray photoelectron spectroscopy, Fourier transform-infrared spectroscopy, ellipsometry), while the biological response of these coatings has been tested by protein adsorption and cell culture experiments. The modulation of the input plasma power controls the concentration of polyethylene oxide groups in the coatings and allows the production of films with opposite protein and cell repellent properties. The study of the stability of these coatings in different media (water, acetone, phosphate-buffered saline) reveals that these films could be involved in classical lift-off processes for the production of patterned surfaces.

Plasma-based processes for surface wettability modification.

In this article, we describe a method to create rough features on silicon surfaces by reactive etching of a photoresist layer. The roughness and, consequently, the wettability of the surfaces can be modified by modifying the duration of plasma etching. Hydrophobic materials deposited on the rough silicon surface can be modified until a superhydrophobic behavior is obtained, whereas hydrophilic materials become more hydrophilic. The elaboration technique described herein offers an inexpensive and rapid method for the creation of tunable roughness on silicon surfaces with large areas.

Immobilization of antibodies on biosensing devices by nanoarrayed self-assembled monolayers.

This work presents an original and straightforward technique for antibody immobilization onto a surface, keeping the antibody in a biologically reactive configuration. Self-assembly of molecular monolayers and plasma-based colloidal lithography were combined to create chemical nanopatterns on the surface of a biosensing device. This technique was employed to create an array of 100 nm wide motifs having a hexagonal 2-D crystalline structure, characterized by COOH-terminated nanospots in a CH3-terminated matrix. The quality control of the chemical nanopattern was carried out by combining atomic force microscopy, ellipsometry, and contact angle measurements. Enzyme-linked immunosorbent assay experiments were set up showing that the COOH/CH3 nanopatterned surface constrains the immobilization of the antibodies in a biologically reactive configuration, thus significantly improving the device performances as compared to those of more conventional nonpatterned COOH-terminated or CH3-terminated surfaces.