Colourfast pigments in silicone hand and maxillofacial prostheses.

This study addresses the clinical problem of long-term discolouration of silicone hand and maxillofacial prostheses. Seven (7) pigment hues, considered essential for achieving a suitable tissue colour-matched prosthesis, were compared for their colourfast property, across three selected proprietary formulations. In all, a series of 21 pigments, were tested for colourfastness. The pigments, presenting as suspensions (PS), pastes (PP) and dry pigments (PD), were exposed, over nine months, to ultraviolet light, elevated temperatures and varying concentrations of salinity. Colour change of the pigments was measured and expressed as Commission International de l'Eclairage (CIE) (L*, a*, b*) units. Pigment discoloration was significantly attributed to ultraviolet light. Pigmented and clear silicone samples showed a "yellowing" (+delta b*) effect. Lighter pigments became darker (-delta L*) in shade. Pigment samples at the elevated temperature of 50 degrees C showed significant but small colour change (delta E, 0.77 to 3.63). Only the master blue pigment (PS-4) recorded a higher delta E, 6.26 at 50 degrees C. At a moderate temperature of 35 degrees C, both pigmented and clear silicone test samples remained relatively colourfast. Comparison was made to control samples, stored in darkness, at 26 degrees C. The pigments were generally colourfast (deltaE<6 units) to saline solutions of 0.15 M and 5.0 M concentrations. Only the monastral red (PD-3) pigment recorded a delta E of 9.33, in 0.15 M normal saline, simulating the vulnerability of this pigment to the salinity of human sweat. Pigment hues were systematically ranked according to colourfastness. Pigment suspensions were more colourfast than pigment pastes.

Esthetic prostheses in minor and major upper limb amputations.

In summary, the impact and value of esthetic prostheses on amputee rehabilitation and their long-term use were demonstrated in this study to have no correlation with the severity of injury and level of amputation. All patients with traumatic amputation should be given equal opportunity to receive prostheses if the service is readily available. Whether use of prostheses is temporary or long-term, they help patients cope with the traumatic life experience of limb loss.

Optimal circumference reduction of finger models for good prosthetic fit of a thimble-type prosthesis for distal finger amputations.

The prosthetic fit of a thimble-type esthetic silicone prosthesis was retrospectively reviewed in 29 patients who were fitted following distal finger amputations. The aim was to correlate prosthetic fit with the magnitudes of circumference reduction in the finger models used to produce the prostheses and to identify the optimum reduction for the best outcome. A good fit is achieved primarily by making the prosthesis circumferentially smaller than the segment of the residual finger (residuum) over which it "cups". The percentage reduction in circumference of the finger model against the residuum model was calculated by dividing the difference in circumference between the residuum model and the finger model by the residuum model circumference and multiplying the result by 100. The computed percentage circumference reduction in the finger models ranged from small (1-3), moderate (5-7), to large (8-9). Twelve of 15 patients whose finger models had between one to three circumference reductions had a loose prosthetic fit. Only two of 14 patients who had a larger model circumference reduction of between five to nine had loose-fitting prostheses. Two of five patients who had eight to nine model circumference reduction had an uncomfortably tight prosthetic fit. A 5-7% circumference reduction in the finger model was shown in this study to best translate into good fit of a thimble-type prosthesis for distal finger amputations.

RTV silicone elastomers in hand prosthetics: properties, applications and techniques.

In this technical note, an overview of RTV (room-temperature-vulcanising) silicone elastomers is provided. The properties and applications of 3 different types of RTV silicones in producing prostheses for the hand are discussed. Vinyl polysiloxanes are excellent silicone impression materials that offer the advantages of a rapid cure, near exact duplication of fine details and ease of removal of the cured impression without permanent deformation. RTV-2 dimethyl polysiloxanes are ideal for mould-making and fabricating prostheses given their favourable qualities that range from ease of pigmentation, adjustable consistency, manageable curing rate and accuracy in recording fine details in the liquid state to excellent stain-resistance, elasticity and biodurability in the vulcanised state. RTV-1 dimethyl polysiloxanes are self-curing, ready-for-use silicones that adhere adequately well to most substrates and are useful for extrinsic hue modifications and waterproofing of the prosthesis. The basic techniques for each of these applications are also discussed. The cure-inhibition of addition-curing RTV silicones by sulphur-, tin- and nitrogen-containing contaminants and its damaging consequence is highlighted. A compilation of known contaminating agents is provided so that prior contact with these objects can be avoided when working with addition-curing silicones. The precautionary measures to prevent the problem are also outlined.

Metamerism in aesthetic prostheses under three standard illuminants--TL84, D65 and F.

This study looks at the effect of metamerism in colour-matching and the assessment of multi-layered silicone rubber finger prostheses. The aim was to identify the choice of illuminants for colour matching the prostheses that would give rise to the least metameric effect between the prostheses and the human skin or the best colour match. The prostheses were prepared and colour matched to a fair-skinned subject under 3 reference illuminants--TL84, D65, F and a combination of illuminants--TL84, D65 and F. The prostheses were then measured for colour using a spectrophotometer based on the CIE indices L*, a*, b* with each prosthesis assessed separately against the subject's index finger under the reference illuminants--TL84, D65 and F. The prostheses were also assessed by a panel of 50 observers and scored according to colour-match. Colour differences between the skin and prosthesis were measured in the illuminant under which the prostheses were prepared and then under the other reference illuminants. A relationship was obtained between the measured mean colour difference, deltaE*, and the mean visual assessment score for each prosthesis. This paper points out the concerns related to the optical phenomenon of metamerism with the colour pigments used. This can affect the colour match of the prosthesis as perceived by the patient. The findings seem to suggest that this metameric colour difference can be minimised if the prosthesis is matched under a combination of lights, which were found to give the best-perceived match.

Creating a model for fabricating a partial hand glove prosthesis using the realigned casts of the contralateral digits.

A method for creating a model for fabricating a partial hand glove prosthesis is described. The realigned casts of the corresponding digits of the contralateral uninjured hand were used to substitute for the lost digits on a cast of the stump. The technique allows an exact reproduction of the anatomical and fine surface details of the digits. It has the advantage of customisation, allowing a close match in the size, shape and surface characteristics of the prosthesis to that of the remaining digits of the hand.

Fitting a hand-glove prosthesis to enhance the reconstructed mutilated hand.

Microsurgical reconstruction of the severely mutilated hand aimed at improving prehensile functions often does not address the esthetic aspects of the hand. The poor appearance of the reconstructed hand affects its active display and use. A hand-glove prosthesis may be prescribed in this instance to enhance the overall form and function of the mutilated hand. We reviewed 16 cases of mutilating hand injuries in which surgical reconstructions were performed and the patients were subsequently fitted with a hand-glove prosthesis to augment the outcome. An improved appearance was achieved in all patients fitted with the prosthesis. The patients' sense of confidence was also enhanced, which in turn promoted the active and open use of the reconstructed hands. While prescribed primarily to improve the appearance of the reconstructed hands, these prostheses were documented to enhance the physical hand functions in 11 cases by increasing the span of the hand and providing an opposable post and a palmar base for holding and for anchorage. The prosthesis enhanced assistive functions of the reconstructed hands and freed the contralateral normal hand for use in bimanual activities, such as holding a wallet and taking out money, supporting a note pad for writing, and holding a plate at buffet receptions. At the 18-month follow-up visit, 13 (87%) of the patients continued to use their prosthesis. Wear and tear were problems associated with the frequent use of the prosthesis. The expected life span of the prosthesis with daily use ranged from 2 to 3 years. All the patients acknowledged that the prosthesis played a role in their rehabilitation and that it helped them to overcome the initial psychological trauma and to come to terms with their physical loss.

Fungal colonisation in digital silicone rubber prostheses.

The fungal discolouration of silicone rubber prostheses is reported in four cases. In two of the cases, the discolouration was caused by the fungus Candida tropicalis. In the other two cases, two different fungal organisms, namely Trichoderma sp. and Scedosporium prolificans were incriminated. The non-porous silicone rubber layers create an enclosed environment in the suction cup of the prosthesis and preclude ventilation at the prosthesis-stump interface. The moisture as a result of sweat and body warmth in the stump assists fungal growth. Residual salts from the sweat, sebum from sebaceous glands and the residues from petroleum jelly (Vaseline) applied to facilitate donning, can adhere to the surfaces of the prosthesis and provide the nutrients for fungal growth. Prolonged continuous usages of the prosthesis, the presence of sweaty palms in the users, donning the prosthesis during manual physical activities which induce perspiration, washing of hands with the prosthesis on and warm humid climatic conditions have been identified as factors predisposing the prosthesis to fungal colonisation. The fungal growth caused a black discolouration and marred the aesthetic quality of the prostheses. As a preventative measure, daily immersion of the prostheses in denture cleaner such as benzalkonium chloride, or water at 60 degrees C for 15 minutes, or decontamination with 70% alcohol is recommended. Prior cleaning to remove organic matter before decontamination is emphasised.

A technique of acrylic nail fixation in multilayered silicone finger prostheses.

A technique for the secure fixation of acrylic nails in multilayered silicone finger prostheses is described. The secure fixation of the nail to the prosthesis is achieved by a method of "sandwiching" portions of the nail between the silicone layers of the prosthesis akin to the overlapping of the nail by the anatomical nail fold and nail wall. In addition the use of a cynoacrylate adhesive ensures strong surface to surface bonding.

Aesthetic life-like finger and hand prostheses: prosthetic prescription and factors influencing choices.

This paper reviews the authors' experience with fitting life-like finger and hand prosthesis. The methodology and technical considerations in producing these prostheses, the prosthetic prescription according to the level of amputation and the challenges faced with each level are discussed. In cases where the amputation is sufficiently distal, a thimble prosthesis has been used. This is compared to fitting a full-length finger prosthesis. Besides allowing free range of motion of the proximal finger joints which would otherwise be covered and restricted with fitting a finger prosthesis, a thimble prosthesis minimises skin coverage for optimal sensibility and is easier to don and doff. In cases of amputations where a digital fitting is precluded, a partial or a total hand is prescribed. A comparison between fitting a finger, a partial hand prosthesis and a total hand prosthesis is also discussed. Cases of a digital, transcarpal and a more proximal transmetacarpal amputations are relatively easy to fit with a prosthesis. An incomplete transmetacarpal amputation where much of the breadth of the hand is preserved presents a difficult challenge as it necessitates fitting with a partial hand prosthesis. Besides the need to cover a large area of the intact skin and the associated problems with reduced sensibility and stump perspiration, a partial hand prosthesis is difficult to don and doff.