Nano antenna-assisted quantum dots emission into high-index planar waveguide.

Integrated quantum photonic circuits require the efficient coupling of photon sources to photonic waveguides. Hybrid plasmonic/photonic platforms are a promising approach, taking advantage of both plasmon modal confinement for efficient coupling to a nearby emitter and photonic circuitry for optical data transfer and processing. In this work, we established directional quantum dot (QD) emission coupling to a planar TiO2waveguide assisted by a Yagi-Uda antenna. Antenna on waveguide is first designed by scaling radio frequency dimensions to nano-optics, taking into account the hybrid plasmonic/photonic platform. Design is then optimized by full numerical simulations. We fabricate the antenna on a TiO2planar waveguide and deposit a few QDs close to the Yagi-Uda antenna. The optical characterization shows clear directional coupling originating from antenna effect. We estimate the coupling efficiency and directivity of the light emitted into the waveguide.

Unraveling the time cross correlations of an emitter switching between two states with the same fluorescence intensity.

The autocorrelation function of the fluorescence intensity of a nanoemitter is measured with the standard Hanbury-Brown and Twiss setup. Time-tagging of the photodetection events during all the experiment has opened new possibilities in terms of post-selection techniques that enable to go beyond the blinking and antibunching characterization. Here, we first present a new method developed to investigate in detail the antibunching of a fluorophore switching between two emitting states. Even if they exhibit the same fluorescence intensity, their respective amount of antibunching can be measured using the gap between their respective decay rates. The method is then applied to a nanoemitter consisting in a colloidal quantum dot coupled to a plasmonic resonator. The relative quantum efficiency of the charged and neutral biexcitons are determined.

Generalization of the polar representation in time domain fluorescence lifetime imaging microscopy for biological applications: practical implementation.

The polar representation or phasor, which provides a fast and visual indication on the number of exponentials present in the intensity decay of the fluorescence lifetime images is increasingly used in time domain fluorescence lifetime imaging microscopy experiments. The calculations of the polar coordinates in time domain fluorescence lifetime imaging microscopy experiments involve several experimental parameters (e.g. instrumental response function, background, angular frequency, number of temporal channels) whose role has not been exhaustively investigated. Here, we study theoretically, computationally and experimentally the influence of each parameter on the polar calculations and suggest parameter optimization for minimizing errors. We identify several sources of mistakes that may occur in the calculations of the polar coordinates and propose adapted corrections to compensate for them. For instance, we demonstrate that the numerical integration method employed for integrals calculations may induce errors when the number of temporal channels is low. We report theoretical generalized expressions to compensate for these deviations and conserve the semicircle integrity, facilitating the comparison between fluorescence lifetime imaging microscopy images acquired with distinct channels number. These theoretical generalized expressions were finally corroborated with both Monte Carlo simulations and experiments.

Quantitative comparison of polar approach versus fitting method in time domain FLIM image analysis.

We calculate here analytically the performance of the polar approach (or phasor) in terms of signal-to-noise ratio and F values when performing time-domain Fluorescence Lifetime Imaging Microscopy (FLIM) to determine the minimal number of photons necessary for FLIM measurements (which is directly related to the F value), and compare them to those obtained from a well-known fitting strategy using the Least Square Method (LSM). The importance of the fluorescence background on the lifetime measurement precision is also investigated. We demonstrate here that the LSM does not provide the best estimator of the lifetime parameter for fluorophores exhibiting mono-exponential intensity decays as soon as fluorescence background is superior to 5%. The polar approach enables indeed to determine more precisely the lifetime values for a limited range corresponding to usually encountered fluorescence lifetime values. These theoretical results are corroborated with Monte Carlo simulations. We finally demonstrate experimentally that the polar approach allows distinguishing in living cells two fluorophores undetectable with usual time-domain LSM fitting software.

Control of pulse-to-pulse fluctuations in visible supercontinuum.

Long-pulse supercontinuum sources are initiated by modulation instability and consequently suffer from stochastic shot-to-shot variations of their spectral power density. In this paper, we provide a measurement of pulse-to-pulse fluctuations over the whole supercontinuum spectrum, and we show that their spectral dependence follows the group index curve of the fiber. Then, we demonstrate a significant reduction of supercontinuum pulse-to-pulse fluctuations in the visible by using a photonic crystal fiber with longitudinally tailored guidance properties. We finally show numerically that this new source would allow a significant improvement of the signal-to-noise ratio in fluorescence microscopy.

Three-dimensional polar representation for multispectral fluorescence lifetime imaging microscopy.

Multispectral fluorescence lifetime imaging microscopy is a promising and powerful technique for discriminating multiply labeled samples and for detecting molecular interactions inside thick, heterogeneous, and light-scattering milieu such as tissue. The fast and correct analysis of the spectral and lifetime images constitutes a major challenge, which requires a high level of expertise. We present here a new approach that considerably simplifies this analysis avoiding complex fitting algorithm strategies and permitting a fast and visual graphical representation of the fluorescence lifetimes. By transforming the experimental data from time domain to frequency domain for each spectral channel, we calculate the multispectral polar representation and demonstrate its interest on multiply fluorescent labeled sample. We further apply it on Förster resonance energy transfer (FRET) experiments and demonstrate that FRET measurements with a high level of precision can be performed. With addition of emission wavelength as third dimension in the polar representation, autofluorescence emitted by the sample is thus clearly identified. Analysis artifacts induced by the sample or by fitting algorithm choice become then totally inexistent.

Enhanced background rejection in thick tissue with differential-aberration two-photon microscopy.

When a two-photon excited fluorescence (TPEF) microscope is used to image deep inside tissue, out-of-focus background can arise from both ballistic and nonballistic excitation. We propose a solution to largely reject TPEF background in thick tissue. Our technique is based on differential-aberration imaging with a deformable mirror. By introducing extraneous aberrations in the excitation beam path, we preferentially quench in-focus TPEF signal while leaving out-of-focus TPEF background largely unchanged. A simple subtraction of an aberrated, from an unaberrated, TPEF image then removes background while preserving signal. Our differential aberration (DA) technique is simple, robust, and can readily be implemented with standard TPEF microscopes with essentially no loss in temporal resolution when using a line-by-line DA protocol. We analyze the performance of various induced aberration patterns, and demonstrate the effectiveness of DA-TPEF by imaging GFP-labeled sensory neurons in a mouse olfactory bulb and CA1 pyramidal cells in a hippocampus slice.

Organization and orientation of amphiphilic push-pull chromophores deposited in Langmuir-Blodgett monolayers studied by second harmonic generation and atomic force microscopy.

Orientation and organization of two amphiphilic push-pull chromophores mixed with two phospholipids (dipalmitoylphosphatidylcholine and dioleoylphosphatidylcholine) in Langmuir-Blodgett (LB) monolayers are investigated by second harmonic generation. The LB monolayers have also been characterized by atomic force microscopy and UV-vis spectroscopy. The effective molecular orientations and hyperpolarizabilities of the chromophores are studied as a function of the phospholipid concentrations. The experimental results are discussed within the frame of a model of orientational distribution of the chromophores which gives the orientational mean angle and bounds on the orientational disorder. The mean orientation of the chromophores is found to be within 45-55 degrees whereas their hyperpolarizability coefficients, measured with respect to quartz, are estimated to be in the range (0.3-0.7) x 10(-27) esu taking account of the maximal orientational disorder.

Potential efficacy of a delta 5-aminolevulinic acid bioadhesive gel formulation for the photodynamic treatment of lesions of the gastrointestinal tract in mice.

A delta 5-aminolevulinic acid (ALA) bioadhesive gel has been developed and evaluated in an in-vivo mouse model for photodynamic treatment of gastric cancer or Barrett's oesophagus. Four gels were tested: noveon AA-1, keltrol T, lutrol and blanose. An initial in-vitro study of gel adhesion showed that noveon and keltrol had longer polyethylene transit times than lutrol and blanose. In-vivo assays indicated that protoporphyrin IX was synthesized by gastric mucosa when ALA-noveon and ALA-lutrol were used (preferable results for noveon). Keltrol was eliminated from the study after these investigations. Only ALA-noveon gel was retained for studies of the relationship between ALA dose and fluorescence. Fluorescence measurements in-vivo showed that ALA concentration and application time had an influence on protoporphyrin IX synthesis. Maximum intensity (2091 counts s-1) was found with 2 mg mL-1 ALA, and fluorescence intensities differed with application time, reaching 1805 counts s-1 after 240 min. ALA-noveon, showing good adhesion and enabling efficient diffusion of ALA at a pH < 6, was considered the best formulation for maintaining ALA stability.