Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 8 de 8
Filtrar
Mais filtros










Base de dados
Intervalo de ano de publicação
1.
Nature ; 630(8017): 636-642, 2024 Jun.
Artigo em Inglês | MEDLINE | ID: mdl-38811732

RESUMO

Chemical vapour deposition (CVD) synthesis of graphene on copper has been broadly adopted since the first demonstration of this process1. However, widespread use of CVD-grown graphene for basic science and applications has been hindered by challenges with reproducibility2 and quality3. Here we identify trace oxygen as a key factor determining the growth trajectory and quality for graphene grown by low-pressure CVD. Oxygen-free chemical vapour deposition (OF-CVD) synthesis is fast and highly reproducible, with kinetics that can be described by a compact model, whereas adding trace oxygen leads to suppressed nucleation and slower/incomplete growth. Oxygen affects graphene quality as assessed by surface contamination, emergence of the Raman D peak and decrease in electrical conductivity. Epitaxial graphene grown in oxygen-free conditions is contamination-free and shows no detectable D peak. After dry transfer and boron nitride encapsulation, it shows room-temperature electrical-transport behaviour close to that of exfoliated graphene. A graphite-gated device shows well-developed integer and fractional quantum Hall effects. By highlighting the importance of eliminating trace oxygen, this work provides guidance for future CVD system design and operation. The increased reproducibility and quality afforded by OF-CVD synthesis will broadly influence basic research and applications of graphene.

2.
Nanoscale ; 11(11): 4864-4875, 2019 Mar 14.
Artigo em Inglês | MEDLINE | ID: mdl-30821309

RESUMO

Chemical vapor deposition of CH4 on Ge(001) can enable anisotropic growth of narrow, semiconducting graphene nanoribbons with predominately smooth armchair edges and high-performance charge transport properties. However, such nanoribbons are not aligned in one direction but instead grow perpendicularly, which is not optimal for integration into high-performance electronics. Here, it is demonstrated that vicinal Ge(001) substrates can be used to synthesize armchair nanoribbons, of which ∼90% are aligned within ±1.5° perpendicular to the miscut. When the growth rate is slow, graphene crystals evolve as nanoribbons. However, as the growth rate increases, the uphill and downhill crystal edges evolve asymmetrically. This asymmetry is consistent with stronger binding between the downhill edge and the Ge surface, for example due to different edge termination as shown by density functional theory calculations. By tailoring growth rate and time, nanoribbons with sub-10 nm widths that exhibit excellent charge transport characteristics, including simultaneous high on-state conductance of 8.0 µS and a high on/off conductance ratio of 570 in field-effect transistors, are achieved. Large-area alignment of semiconducting ribbons with promising charge transport properties is an important step towards understanding the anisotropic nanoribbon growth and integrating these materials into scalable, future semiconductor technologies.

3.
J Phys Chem Lett ; 7(9): 1667-74, 2016 05 05.
Artigo em Inglês | MEDLINE | ID: mdl-27097073

RESUMO

We report on real time observations of the sublimation of exfoliated black phosphorus layers throughout annealing using in situ low energy electron microscopy. We found that sublimation manifests itself above 375 ± 20 °C through the nucleation and expansion of asymmetric, faceted holes with the long axis aligned along the [100] direction and sharp tips defined by edges consisting of alternating (10) and (11) steps. This thermally activated process repeats itself via successive sublimation of individual layers. Calculations and simulations using density functional theory and kinetic Monte Carlo allowed to determine the involved atomic pathways. Sublimation is found to occur via detachments of phosphorus dimers rather than single atoms. This behavior and the role of defects is described using an analytical model that captures all essential features. This work establishes an atomistic-level understanding of the thermal stability of exfoliated black phosphorus and defines the temperature window available for material and device processing.

4.
Phys Chem Chem Phys ; 17(43): 29150-60, 2015 Nov 21.
Artigo em Inglês | MEDLINE | ID: mdl-26462749

RESUMO

The growth of the first ten layers of organic thin films on a smooth metallic substrate has been investigated in real-time using the model system PTCDA on Ag(111). The complex behaviour is comprehensively studied by electron microscopy, spectroscopy and diffraction in a combined PEEM/LEEM instrument revealing several new phenomena and yielding a consistent picture of this layer growth. PTCDA grows above room temperature in a Stranski-Krastanov mode, forming three-dimensional islands on a stable bi-layer, in competition with metastable 3rd and 4th layers. Around room temperature this growth mode changes into a quasi layer-by-layer growth, while at temperatures below about 250 K a Vollmer-Weber-like behaviour is observed. By means of laterally resolved soft X-ray absorption spectroscopy the orientation of all adsorbed molecules is found to be homogeneously flat lying on the surface, even during the growth process. The films grow epitaxially, showing long-range order with rotational domains. For the monolayer these domains could be directly analysed, showing an average size of several micrometers extending over substrate steps.

5.
Nat Commun ; 6: 8006, 2015 Aug 10.
Artigo em Inglês | MEDLINE | ID: mdl-26258594

RESUMO

Graphene can be transformed from a semimetal into a semiconductor if it is confined into nanoribbons narrower than 10 nm with controlled crystallographic orientation and well-defined armchair edges. However, the scalable synthesis of nanoribbons with this precision directly on insulating or semiconducting substrates has not been possible. Here we demonstrate the synthesis of graphene nanoribbons on Ge(001) via chemical vapour deposition. The nanoribbons are self-aligning 3° from the Ge〈110〉 directions, are self-defining with predominantly smooth armchair edges, and have tunable width to <10 nm and aspect ratio to >70. In order to realize highly anisotropic ribbons, it is critical to operate in a regime in which the growth rate in the width direction is especially slow, <5 nm h(-1). This directional and anisotropic growth enables nanoribbon fabrication directly on conventional semiconductor wafer platforms and, therefore, promises to allow the integration of nanoribbons into future hybrid integrated circuits.

6.
Nat Mater ; 14(8): 826-32, 2015 Aug.
Artigo em Inglês | MEDLINE | ID: mdl-26006004

RESUMO

Thin layers of black phosphorus have recently raised interest owing to their two-dimensional (2D) semiconducting properties, such as tunable direct bandgap and high carrier mobilities. This lamellar crystal of phosphorus atoms can be exfoliated down to monolayer 2D-phosphane (also called phosphorene) using procedures similar to those used for graphene. Probing the properties has, however, been challenged by a fast degradation of the thinnest layers on exposure to ambient conditions. Herein, we investigate this chemistry using in situ Raman and transmission electron spectroscopies. The results highlight a thickness-dependent photoassisted oxidation reaction with oxygen dissolved in adsorbed water. The oxidation kinetics is consistent with a phenomenological model involving electron transfer and quantum confinement as key parameters. A procedure carried out in a glove box is used to prepare mono-, bi- and multilayer 2D-phosphane in their pristine states for further studies on the effect of layer thickness on the Raman modes. Controlled experiments in ambient conditions are shown to lower the A(g)(1)/A(g)(2) intensity ratio for ultrathin layers, a signature of oxidation.

7.
J Phys Chem Lett ; 4(7): 1100-3, 2013 Apr 04.
Artigo em Inglês | MEDLINE | ID: mdl-26282027

RESUMO

A systematic study has been conducted to investigate the role of hydrogen in the etching reaction of graphene films grown on copper foils. The results at 825 °C and 500 mTorr showed no evidence of graphene etching by purified ultrahigh purity (UHP)-grade hydrogen, whereas graphene films exposed to unpurified UHP-grade hydrogen were considerably etched due to the presence of oxygen or other oxidizing impurities. This finding reveals not only the major impact of oxidizing impurities in the graphene etching reaction, but also entails understanding and controlling the graphene chemical vapor deposition mechanism on copper substrates.

8.
Nano Lett ; 11(1): 132-7, 2011 Jan 12.
Artigo em Inglês | MEDLINE | ID: mdl-21141990

RESUMO

Graphene field effect transistors (FETs) are extremely sensitive to gas exposure. Charge transfer doping of graphene FETs by atmospheric gas is ubiquitous but not yet understood. We have used graphene FETs to probe minute changes in electrochemical potential during high-purity gas exposure experiments. Our study shows quantitatively that electrochemistry involving adsorbed water, graphene, and the substrate is responsible for doping. We not only identify the water/oxygen redox couple as the underlying mechanism but also capture the kinetics of this reaction. The graphene FET is highlighted here as an extremely sensitive potentiometer for probing electrochemical reactions at interfaces, arising from the unique density of states of graphene. This work establishes a fundamental basis on which new electrochemical nanoprobes and gas sensors can be developed with graphene.


Assuntos
Grafite/química , Oxigênio/química , Água/química , Eletroquímica , Transporte de Elétrons , Oxirredução , Transistores Eletrônicos
SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA
...