Quantum bath suppression in a superconducting circuit by immersion cooling.

Quantum circuits interact with the environment via several temperature-dependent degrees of freedom. Multiple experiments to-date have shown that most properties of superconducting devices appear to plateau out at T ≈ 50 mK - far above the refrigerator base temperature. This is for example reflected in the thermal state population of qubits, in excess numbers of quasiparticles, and polarisation of surface spins - factors contributing to reduced coherence. We demonstrate how to remove this thermal constraint by operating a circuit immersed in liquid 3He. This allows to efficiently cool the decohering environment of a superconducting resonator, and we see a continuous change in measured physical quantities down to previously unexplored sub-mK temperatures. The 3He acts as a heat sink which increases the energy relaxation rate of the quantum bath coupled to the circuit a thousand times, yet the suppressed bath does not introduce additional circuit losses or noise. Such quantum bath suppression can reduce decoherence in quantum circuits and opens a route for both thermal and coherence management in quantum processors.

Electronuclear Transition into a Spatially Modulated Magnetic State in YbRh_{2}Si_{2}.

The nature of the antiferromagnetic order in the heavy fermion metal YbRh_{2}Si_{2}, its quantum criticality, and superconductivity, which appears at low mK temperatures, remain open questions. We report measurements of the heat capacity over the wide temperature range 180 µK-80 mK, using current sensing noise thermometry. In zero magnetic field we observe a remarkably sharp heat capacity anomaly at 1.5 mK, which we identify as an electronuclear transition into a state with spatially modulated electronic magnetic order of maximum amplitude 0.1 µ_{B}. We also report results of measurements in magnetic fields in the range 0 to 70 mT, applied perpendicular to the c axis, which show eventual suppression of this order. These results demonstrate a coexistence of a large moment antiferromagnet with putative superconductivity.

Fragility of surface states in topological superfluid 3He.

Superfluid 3He, with unconventional spin-triplet p-wave pairing, provides a model system for topological superconductors, which have attracted significant interest through potential applications in topologically protected quantum computing. In topological insulators and quantum Hall systems, the surface/edge states, arising from bulk-surface correspondence and the momentum space topology of the band structure, are robust. Here we demonstrate that in topological superfluids and superconductors the surface Andreev bound states, which depend on the momentum space topology of the emergent order parameter, are fragile with respect to the details of surface scattering. We confine superfluid 3He within a cavity of height D comparable to the Cooper pair diameter ξ0. We precisely determine the superfluid transition temperature Tc and the suppression of the superfluid energy gap, for different scattering conditions tuned in situ, and compare to the predictions of quasiclassical theory. We discover that surface magnetic scattering leads to unexpectedly large suppression of Tc, corresponding to an increased density of low energy bound states.

Fabrication of microfluidic cavities using Si-to-glass anodic bonding.

We demonstrate the fabrication of ∼1.08 µm deep microfluidic cavities with characteristic size as large as 7 mm × 11 mm or 11 mm diameter, using a silicon-glass anodic bonding technique that does not require posts to act as separators to define cavity height. Since the phase diagram of 3He is significantly altered under confinement, posts might act as pinning centers for phase boundaries. The previous generation of cavities relied on full wafer-bonding which is more prone to failure and requires dicing post-bonding, whereas these cavities are made by bonding a pre-cut piece of Hoya SD-2 glass to a patterned piece of silicon in which the cavity is defined by etching. Anodic bonding was carried out at 425 °C with 200 V, and we observe that pressurizing the cavity to failure (>30 bars pressure) results in glass breaking, rather than the glass-silicon bond separation. In this article, we discuss the detailed fabrication of the cavity, its edges, and details of the junction between the coin silver fill line and the silicon base of the cavity that enables a low internal-friction joint. This feature is important for mass coupling torsional oscillator experimental assays of the superfluid inertial contribution where a high quality factor (Q) improves frequency resolution. The surface preparation that yields well-characterized smooth surfaces to eliminate pinning sites, the use of transparent glass as a cover permitting optical access, low temperature capability, and attachment of pressure-capable ports for fluid access may be features that are important in other applications.

The A-B transition in superfluid helium-3 under confinement in a thin slab geometry.

The influence of confinement on the phases of superfluid helium-3 is studied using the torsional pendulum method. We focus on the transition between the A and B phases, where the A phase is stabilized by confinement and a spatially modulated stripe phase is predicted at the A-B phase boundary. Here we discuss results from superfluid helium-3 contained in a single 1.08-µm-thick nanofluidic cavity incorporated into a high-precision torsion pendulum, and map the phase diagram between 0.1 and 5.6 bar. We observe only small supercooling of the A phase, in comparison to bulk or when confined in aerogel, with evidence for a non-monotonic pressure dependence. This suggests that an intrinsic B-phase nucleation mechanism operates under confinement. Both the phase diagram and the relative superfluid fraction of the A and B phases, show that strong coupling is present at all pressures, with implications for the stability of the stripe phase.

Primary current-sensing noise thermometry in the millikelvin regime.

The use of low-temperature platforms with base temperatures below 1 K is rapidly expanding, for fundamental science, sensitive instrumentation and new technologies of potentially significant commercial impact. Precise measurement of the thermodynamic temperature of these low-temperature platforms is crucial for their operation. In this paper, we describe a practical and user-friendly primary current-sensing noise thermometer (CSNT) for reliable and traceable thermometry and the dissemination of the new kelvin in this temperature regime. Design considerations of the thermometer are discussed, including the optimization of a thermometer for the temperature range to be measured, noise sources and thermalization. We show the procedure taken to make the thermometer primary and contributions to the uncertainty budget. With standard laboratory instrumentation, a relative uncertainty of 1.53% is obtainable. Initial comparison measurements between a primary CSNT and a superconducting reference device traceable to the PLTS-2000 (Provisional Low Temperature Scale of 2000) are presented between 66 and 208 mK, showing good agreement within the k=1 calculated uncertainty.

Phase diagram of the topological superfluid 3He confined in a nanoscale slab geometry.

The superfluid phases of helium-3 ((3)He) are predicted to be strongly influenced by mesoscopic confinement. However, mapping out the phase diagram in a confined geometry has been experimentally challenging. We confined a sample of (3)He within a nanofluidic cavity of precisely defined geometry, cooled it, and fingerprinted the order parameter using a sensitive nuclear magnetic resonance spectrometer. The measured suppression of the p-wave order parameter arising from surface scattering was consistent with the predictions of quasi-classical theory. Controlled confinement of nanofluidic samples provides a new laboratory for the study of topological superfluids and their surface- and edge-bound excitations.

Anodically bonded submicron microfluidic chambers.

We demonstrate the use of anodic bonding to fabricate cells with characteristic size as large as 7 x 10 mm(2), with height of approximately 640 nm, and without any internal support structure. The cells were fabricated from Hoya SD-2 glass and silicon wafers, each with 3 mm thickness to maintain dimensional stability under internal pressure. Bonding was carried out at 350 degrees C and 450 V with an electrode structure that excluded the electric field from the open region. We detail fabrication and characterization steps and also discuss the design of the fill line for access to the cavity.

Effects of haloperidol on human plasma magnesium.

The effect of haloperidol treatment on human plasma levels of magnesium (Mg), calcium (Ca) and phosphorus (P) was assessed. Haloperidol treatment significantly reduced plasma Mg but not plasma Ca or P levels. This finding contrasts with studies using other neuroleptics where reductions in both Mg and Ca concentrations were observed. The addition of lithium to haloperidol treatment resulted in an elevation of plasma Mg, but not Ca or P, to levels significantly greater than those at baseline. The reduction of Mg levels by haloperidol may reflect the ion's involvement in the pathology of psychosis and/or in the mechanism of generating extrapyramidal side effects.