In vivo demonstration of a self-sustaining, implantable, stimulated-muscle-powered piezoelectric generator prototype.

An implantable, stimulated-muscle-powered piezoelectric active energy harvesting generator was previously designed to exploit the fact that the mechanical output power of muscle is substantially greater than the electrical power necessary to stimulate the muscle's motor nerve. We reduced to practice the concept by building a prototype generator and stimulator. We demonstrated its feasibility in vivo, using rabbit quadriceps to drive the generator. The generated power was sufficient for self-sustaining operation of the stimulator and additional harnessed power was dissipated through a load resistor. The prototype generator was developed and the power generating capabilities were tested with a mechanical muscle analog. In vivo generated power matched the mechanical muscle analog, verifying its usefulness as a test-bed for generator development. Generator output power was dependent on the muscle stimulation parameters. Simulations and in vivo testing demonstrated that for a fixed number of stimuli/minute, two stimuli applied at a high frequency generated greater power than single stimuli or tetanic contractions. Larger muscles and circuitry improvements are expected to increase available power. An implanted, self-replenishing power source has the potential to augment implanted battery or transcutaneously powered electronic medical devices.

Design considerations for an implantable, muscle powered piezoelectric system for generating electrical power.

A totally implantable piezoelectric generator system able to harness power from electrically activated muscle would augment the power systems of implanted functional electrical stimulation devices by reducing the number of battery replacement surgeries or by allowing periods of untethered functionality. The generator design contains no moving parts and uses a portion of the generated power for system operation. A software model of the system was developed and simulations performed to predict the output power as the system parameters were varied within their constraints. Mechanical forces that mimic muscle forces were experimentally applied to a piezoelectric generator to verify the accuracy of the simulations and to explore losses due to mechanical coupling. Depending on the selection of system parameters, software simulations predict that this generator concept can generate up to 690 microW of power, which is greater than the power necessary to drive the generator, conservatively estimated to be 46 microW. These results suggest that this concept has the potential to be an implantable, self-replenishing power source and warrants further investigation.