Fabrication Technology and Characteristics of a Magnetic Sensitive Transistor with nc-Si:H/c-Si Heterojunction.

This paper presents a magnetically sensitive transistor using a nc-Si:H/c-Si heterojunction as an emitter junction. By adopting micro electro-mechanical systems (MEMS) technology and chemical vapor deposition (CVD) method, the nc-Si:H/c-Si heterojunction silicon magnetically sensitive transistor (HSMST) chips were designed and fabricated on a p-type <100> orientation double-side polished silicon wafer with high resistivity. In addition, a collector load resistor ( R L ) was integrated on the chip, and the resistor converted the collector current ( I C ) to a collector output voltage ( V out ). When I B = 8.0 mA, V DD = 10.0 V, and R L = 4.1 kΩ, the magnetic sensitivity ( S V ) at room temperature and temperature coefficient ( α C ) of the collector current for HSMST were 181 mV/T and -0.11%/°C, respectively. The experimental results show that the magnetic sensitivity and temperature characteristics of the proposed transistor can be obviously improved by the use of a nc-Si:H/c-Si heterojunction as an emitter junction.

Performance enhancement of ZnO UV photodetectors by surface plasmons.

Surface plasmons, a unique property of metal nanoparticles, have been widely applied to enhance the performance of optical and electrical devices. In this study, a high quality zinc oxide (ZnO) thin film was grown on a quartz substrate by a radio frequency magnetron sputtering technique, and a metal-semiconductor-metal structured ultraviolet detector was prepared on the ZnO film. The responsivity of the photodetector was enhanced from 0.836 to 1.306 A/W by sputtering metal (Pt) nanoparticles on the surface of the device. In addition, the absorption of the ZnO thin film was enhanced partly in the ultraviolet band. It is revealed that Pt nanoparticles play a key role in enhancing the performance of the photodetectors, where surface plasma resonance occurs.

Triggering and guiding high-voltage discharge in air by single and multiple femtosecond filaments.

The abilities to trigger and guide high-voltage discharge by using single and multiple filaments (MFs) are experimentally studied. It is shown that the discharge voltage threshold can be reduced significantly in both regimes of single and MF; however, the MF does not gain a larger reduction than a single filament. This behavior of the MF is attributed to the single discharge path rather than simultaneous multiple ones as one might expect during the discharge process.