RESUMO
With 2-COOH and 4-SH donors all packed onto the benzene ring, tetrasulfanyl terephthalic acid (TST) is a simple yet fully equipped ligand to move the field of metal-coordination materialsâit is now accomplished. The hard-soft carboxyl-thiol synergy is leveraged here in selectively bonding the carboxyl units to Zr(IV) ions to form the same cubic net of UiO-66 (this being based on the terephthalic linker)âwith the free-standing dithiolene units equipping the grid of ZrTST. The 3D network of ZrTST averages about 7.6 connections [as in Zr6O4(OH)4(C8H4O4S4)3.8], with the other 4.4 sealed by acetate ions. The ZrTST solid is stable in boiling water (it is formed in water/acetic acid/ethane dithiol) and remains ordered even above 300 °C. The thiol-enabled ZrTST (powder) takes up mercury from water with a high distribution coefficient Kd (e.g., 1.2 × 106 mL·g-1); it also shows proton conductivity (1.9 × 10-3 S·cm-1 at 90 °C and 90% relative humidity), which, most notably, increases to a highest value of 3.7 × 10-1 S·cm-1 after oxidizing the -SH into the -SO3H groups.
RESUMO
Despite the notable progress in perovskite solar cells, maintaining long-term operational stability and minimizing potentially leaked lead (Pb2+) ions are two challenges that are yet to be resolved. Here we address these issues using a thiol-functionalized 2D conjugated metal-organic framework as an electron-extraction layer at the perovskite/cathode interface. The resultant devices exhibit high power conversion efficiency (22.02%) along with a substantially improved long-term operational stability. The perovskite solar cell modified with a metal-organic framework could retain more than 90% of its initial efficiency under accelerated testing conditions, that is continuous light irradiation at maximum power point tracking for 1,000 h at 85 °C. More importantly, the functionalized metal-organic framework could capture most of the Pb2+ leaked from the degraded perovskite solar cells by forming water-insoluble solids. Therefore, this method that simultaneously tackles the operational stability and lead contamination issues in perovskite solar cells could greatly improve the feasibility of large-scale deployment of perovskite photovoltaic technology.
RESUMO
We employ facile aromatic nucleophilic substitution between the mercapto (-SH) and arylfluoro (Ar-F) groups to achieve extensive and robust cross-linking of a coordination host by porphyrin guests that also serve the purpose of versatile postsynthetic functionalization. For this, a tritopic linker with three trident-like thiol-flanked carboxyl units are reacted with ZrOCl2·8H2O to afford a two-dimensional (3,6-connected) net. The wide aperture of the porous framework solid, together with its stability in both air and boiling water, facilitates the entry of bulky metalloporphyrin guests and the subsequent property studies. On the porphyrin side, four pentafluorophenyl (C6F5-) groups offer multiple fluoro groups to facilitate their replacement by the thiol groups from the host net. The inserted metalloporphyrin bridges impart to the metal-organic framework (MOF) host stable and recyclable activities for photocatalytic hydrogen production. We also disclose an improvement in synthetic methodology, in which BBr3 is used to simultaneously cleave the ester and benzyl thioether groups to more efficiently access thiol-equipped carboxylic acid building block.
RESUMO
Finely dispersed Co(0) and CoO species were efficiently loaded into a stable metal-organic framework to impart catalytic activities to the porous solid. The metalation of the MOF host is facilitated by the dense arrays of accessible alkyne units that boost the alkyne-Co2(CO)8 interaction. The tetrakis(4-carboxylphenylethynyl)pyrene linker, with eight symmetrically backfolded alkyne side arms, features strong fluorescence and a dendritic Sierpinski shape. The resultant Zr(IV)-MOF features NU-901 topology (scu net, with rhombus channels) and breathing properties (e.g., the contracted (porous) phase reverts to the as-made phase upon contact with DMF (dimethylformamide)). The inserted Co2(CO)8 guests quickly react with air to form atomically dispersed CoO species (nondiffracting), and subsequent thermal treatment at 600 °C of the CoO-loaded solid generates an electrocatalyst for the oxygen evolution reaction (OER).
RESUMO
Materials that demonstrate near-infrared (NIR) absorption and can simultaneously convert the electromagnetic irradiation into heat are promising for photothermal therapy. Traditionally, such a material is either pure inorganic, such as CuS, Ag2S, and carbon nanotube, or pure organic, such as polyaniline, polypyrrole, and conjugated polymers. Here we show that strong NIR photothermal effect can also be achieved in inorganic-organic hybrid coordination polymers (CPs) or metal-organic frameworks (MOFs). Our strategy is to construct CPs with inorganic Ag-S components that are interlinked by the organic ligands into a higher-dimensional hybrid network. Interestingly, the two resulting CPs, [Ag(Py-4-CSS)] n 1 and [Ag2(Py-4-CSS)(Py-4-CSSS)] n 2 (Py-4-CSS = pyridine-4-dithiocarboxylate; Py-4-CSSS = pyridine-4-perthiocarboxylate), show disparate structures due to the varied coordination mode of the pyridine group. For 1, the N atom coordinates to the Ag+ center and forms a two-dimensional square framework, while for 2, such a Ag-N bond is disconnected and forms only a one-dimensional structure. Interestingly, this difference leads to the distinct absorption properties in the NIR region. Under 800 nm radiation, the temperature of 1 can rise up to 24.5 °C in 3 min with photothermal conversion efficiency of 22.1%, which is about 2× that of pure inorganic Ag2S material and among the highest compared to various known inorganic materials, for example, Au nanoshells (13%), nanorods (21%), and Cu2- xSe nanocrystals (22%) irradiated with 800 nm light, while for 2, the NIR absorption is absent. This result first demonstrates that the inorganic-organic hybrid approach can be applied to construct superior NIR photothermal materials, but the control of the structure is vital. Here the coordinating nitrogen atoms in 1 are conceived to be critical in promoting the charge transfer between the dithiocarboxylate ligands. To elucidate the response to NIR irradiation of 1, we measured the heat capacity and dielectric constant of 1 and also performed density functional theory calculations. Significantly, the large dielectric constant and flat energy bands indicates 1 is much easier to be polarized and has a high electron effective mass. Thus, unlike the pure inorganic material, such as Ag2S, in which electron and hole can quantum mechanically combine to give off light, the joint-force of organic ligands in 1 effectively enhances polaronic recombination into heat.
RESUMO
We employ a two-step strategy for accessing crystalline porous covalent networks of highly conjugated π-electron systems. For this, we first assembled a crystalline metal-organic framework (MOF) precursor based on Zr(iv) ions and a linear dicarboxyl linker molecule featuring backfolded, highly unsaturated alkyne backbones; massive thermocyclization of the organic linkers was then triggered to install highly conjugated, fused-aromatic bridges throughout the MOF scaffold while preserving the crystalline order. The formation of cyclized carbon links not only greatly strengthens the precursor coordination scaffold, but also, more importantly, enhances electroactivity and charge transport throughout the polycyclic aromatic grid.
RESUMO
Herein a strategy is reported for capturing and sensing iodine by strong I- â â â I2 â â â I- interaction, confined in a metal-organic framework, [Tb(Cu4 I4 )(ina)3 (DMF)] (1) (ina=isonicotinate). As revealed by single-crystal X-ray crystallography, the uptaken I2 molecules directly contact the {Cu4 I4 }n chains, virtually forming an electronically polarizable tetraiodide anion (I42- ) through strong I- â â â I2 â â â I- interaction. As such, a quasi-copper-iodide layer of {Cu4 I5 }n with semiconducting characteristics results, leading to a significant enhancement (Δσ =107 times) in electrical conductivity over the I2 -free 1. The effect observed is several orders of magnitude higher than those reported due to iodineâ â â aromatic interactions (Δσ =102 times) and by interactions between I2 and a redox-active metal centre (Δσ =104 times). The drastic enhancement in electrical conductivity was used to switch on/off an LED bulb, suggesting the possibility of electrically sensing I2 .