An Overview of Recycling Phenolic Resin.

Over a century ago, phenolic formaldehyde (PF) resin was developed and continues to increase in yield due to its diverse applications. However, PF resin is a thermosetting plastic lacking fluidity and moldability, which are nondegradable in natural environments, leading to severe threats to fossil resources as well as global environmental crises. As a result, recycling PF resin is extremely important. In this review, we provide the recent advances in the recycling of PF resin, which includes mechanical recycling, chemical recycling, and utilization of carbon-based materials. The advantages and disadvantages of each strategy are evaluated from a green chemistry perspective. This article aims to attract interest in PF resin design, synthesizing, application and recycling, offering useful suggestions.

Baltic Sea coastal sediment-bound eukaryotes have increased year-round activities under predicted climate change related warming.

Climate change related warming is a serious environmental problem attributed to anthropogenic activities, causing ocean water temperatures to rise in the coastal marine ecosystem since the last century. This particularly affects benthic microbial communities, which are crucial for biogeochemical cycles. While bacterial communities have received considerable scientific attention, the benthic eukaryotic community response to climate change remains relatively overlooked. In this study, sediments were sampled from a heated (average 5°C increase over the whole year for over 50 years) and a control (contemporary conditions) Baltic Sea bay during four different seasons across a year. RNA transcript counts were then used to investigate eukaryotic community changes under long-term warming. The composition of active species in the heated and control bay sediment eukaryotic communities differed, which was mainly attributed to salinity and temperature. The family level RNA transcript alpha diversity in the heated bay was higher during May but lower in November, compared with the control bay, suggesting altered seasonal activity patterns and dynamics. In addition, structures of the active eukaryotic communities varied between the two bays during the same season. Hence, this study revealed that long-term warming can change seasonality in eukaryotic diversity patterns. Relative abundances and transcript expression comparisons between bays suggested that some taxa that now have lower mRNA transcripts numbers could be favored by future warming. Furthermore, long-term warming can lead to a more active metabolism in these communities throughout the year, such as higher transcript numbers associated with diatom energy production and protein synthesis in the heated bay during winter. In all, these data can help predict how future global warming will affect the ecology and metabolism of eukaryotic community in coastal sediments.

Novel hydrophobic butyl rubber damping composites modified with bio-based PF/DBA via the construction of a three-dimensional network.

It is of interest to develop wide-temperature domain damped hydrophobic materials. In this paper, we designed incorporating bio-based phenolic resin into the IIR matrix and introducing dibenzyl fork acetone (DBA) into the main chain structure with sodium hydroxide activation to construct three-dimensional network. In this paper, we designed incorporating bio-based phenolic resin into the IIR matrix and introducing dibenzyl fork acetone (DBA) into the main chain structure with sodium hydroxide activation to construct three-dimensional network. The added bio-based phenolic resin has reticulated structure blended with butyl rubber, combined with sodium hydride activation-modified IIR. The results show that sodium hydride activated modification of DBA is introduced into the main chain structure of IIR by infrared and 1H NMR analysis. The material hydrophobic is realized by the introduction of DBA with static water contact angle of 103.5°. The addition of 10phr lignin-based phenolic resin (LPF) is compatible with IIR, and the torque can reach 7.0 N-m. The tensile elongation of the modified butyl rubber composite can reach 2400% with tensile strength up to 11.43 MPa, while the damping factor can reach 0.37 even at 70 °C. The thermal stability of the composites is enhanced with mass retention rate of 28%. The bio-based PF/NaH activation-modified butyl rubber damping material has potential applications in damping hydrophobicity with wide temperature range.

Endogenous and microbial biomarkers for periodontitis and type 2 diabetes mellitus.

It has been well documented that there is a two-way relationship between diabetes mellitus and periodontitis. Diabetes mellitus represents an established risk factor for chronic periodontitis. Conversely, chronic periodontitis adversely modulates serum glucose levels in diabetic patients. Activated immune and inflammatory responses are noted during diabetes and periodontitis, under the modulation of similar biological mediators. These activated responses result in increased activity of certain immune-inflammatory mediators including adipokines and microRNAs in diabetic patients with periodontal disease. Notably, certain microbes in the oral cavity were identified to be involved in the occurrence of diabetes and periodontitis. In other words, these immune-inflammatory mediators and microbes may potentially serve as biomarkers for risk assessment and therapy selection in diabetes and periodontitis. In this review, we briefly provide an updated overview on different potential biomarkers, providing novel diagnostic and therapeutic insights on periodontal complications and diabetes mellitus.

Effects of Salvia miltiorrhiza active compounds on placenta-mediated pregnancy complications.

Placenta-mediated pregnancy complications (PMPCs), including preeclampsia (PE), fetal growth restriction (FGR), and recurrent spontaneous abortion (RSA), occur in approximately 5% of pregnancies and are caused by abnormal placenta development. The development of effective therapies for PMPCs is still challenging due to the complicated pathogenesis, such as disrupted vascular homeostasis and subsequent abnormal placentation. Synthetic drugs have been recommended for treating PMPCs; however, they tend to cause adverse reactions in the mother and fetus. Salvia miltiorrhiza (S. miltiorrhiza) has potential effects on PMPCs owing to its advantages in treating cardiovascular disorders. S. miltiorrhiza and its active compounds could attenuate the symptoms of PMPCs through anticoagulation, vasodilation, antioxidation, and endothelial protection. Thus, in this review, we summarize the literature and provide comprehensive insights on S. miltiorrhiza and its phytochemical constituents, pharmacological activities, and on PMPCs, which would be valuable to explore promising drugs.

Protective Role of ß-Sitosterol in Glucocorticoid-Induced Osteoporosis in Rats Via the RANKL/OPG Pathway.

Introduction: Osteoporosis affects approximately 10% of the population worldwide. ß-sitosterol (BSS), a major phytosterol in plants, has been claimed for centuries to have numerous medical benefits, including bone strengthening. This study aimed to find the benefit of BSS in treating osteoporosis according to traditional methods and to investigate the protective effect of BSS on glucocorticoid-induced osteoporosis in rats. Design: Wistar rats were randomly assigned to one of four groups: the control group, the dexamethasone (DEX) group and one of two BSS-treated osteoporosis groups (100 and 200 mg/kg). Blood samples and femur bones were collected for histopathology, immunohistochemistry, biochemical and mRNA expression analysis. Results: The results indicated that BSS (100 and 200 mg/kg) increased bone length, bone weight and bone mineral density (BMD) and suppressed DEX-induced reduction in body weight, dose-dependently. Mechanistically, BSS (100 and 200 mg/kg) treatment alleviated the increase of bone resorption markers and the decline of osteogenic markers, which might be partially mediated by regulation of nuclear factor kappa-ß ligand/osteoprotegerin (RANKL/OPG) and RunX2 pathways. The immunohistochemical inducible nitric oxide synthase (iNOS) results of the rats' distal femur were negative in all groups. However, except in the DEX group, the endothelial nitric oxide synthase (eNOS) color reaction in osteoblasts was strongly positive in the other 3 groups. These results suggest that BSS showed promising effects in protection against glucocorticoid-induced osteoporosis by protecting osteoblasts and suppressing osteoclastogenesis.

Biomechanical study of extramedullary and intramedullary fixation in the treatment of unstable intertrochanteric reversed-tilt fractures of the femur.

Background: To investigate the efficacy of the 135° hip screw, 95° intramedullary hip screw (IMHS) and 95° hip screw in the treatment of intertrochanteric reverse dip fracture of the femur. Methods: We retrospectively analyzed 125 matched pairs of human femurs (median age 64 years) which were osteotomized at a 33° angle in the left femur and extended downward from the minor trochanter to simulate a reverse oblique intertrochanteric fracture. The right femur served as a control. The left femur (n=4) was implanted with a 135° hip screw, 95° hip screw, or IMHS. A strain detector was placed distal to the fracture site to monitor fragment strain. The lateral displacement of the proximal femur was measured by a linear variable differential transformer. An Instron tester measured stiffness, strain, and lateral displacement at 25° adduction, and 90° adduction with vertical loads on the femoral head. A 2 cm gap was then formed at the fracture site to simulate comminution and the mechanical test was repeated. Results: Before the formation of the gap, there was no significant difference in stiffness among different bone structures (P>0.05), but after the formation of the gap, the stiffness of all the adduction structures decreased (P=0.03), and the difference in adduction was statistically significant (135° hip screw: 46.6%±3%; 95° hip screw: 22.9%±2%; IMHS: 53.7%±7.8%; P<0.05). Similar results were found for the abduction and buckling positions. There was no significant difference in the lateral displacement of the gap before (P=0.92) and after (P=0.26), but a significant difference in the failure load was found (135° hip screw: 1,222±560 N; 95° hip screw: 2,566±283 N; IMHS: 4,644±518 N; P=0.02). Conclusions: There was no statistically significant difference in stiffness among different structures (P>0.05). However, in the presence of gaps, IMHS bone implant structures are much stiffer than 135° and 95° structures and have a greater destructive load.

SiC Fin-Shaped Gate Trench MOSFET with Integrated Schottky Diode.

A silicon carbide (SiC) trench MOSFET featuring fin-shaped gate and integrated Schottky barrier diode under split P type shield (SPS) protection (FS-TMOS) is proposed by finite element modeling. The physical mechanism of FS-TMOS is studied comprehensively in terms of fundamental (blocking, conduction, and dynamic) performance and transient extreme stress reliability. The fin-shaped gate on the sidewall of the trench and integrated Schottky diode at the bottom of trench aim to the reduction of gate charge and improvement on the third quadrant performance, respectively. The SPS region is fully utilized to suppress excessive electric field both at trench oxide and Schottky contact when OFF-state. Compared with conventional trench MOSFET (C-TMOS), the gate charge, Miller charge, Von at third quadrant, Ron,sp·Qgd, and Ron,sp·Qg of FS-TMOS are significantly reduced by 34%, 20%, 65%, 0.1%, and 14%, respectively. Furthermore, short-circuit and avalanche capabilities are discussed, verifying the FS-TMOS is more robust than C-TMOS. It suggests that the proposed FS-TMOS is a promising candidate for next-generation high efficiency and high-power density applications.

Novel Biallelic DNAH1 Variations Cause Multiple Morphological Abnormalities of the Sperm Flagella.

Sperm motility is vital to human reproduction, and malformed sperm flagella can cause male infertility. Individuals with multiple morphological abnormalities of the flagella mostly have absent, short, coiled, bent, and/or irregular-caliber flagella. In this study, a patient with male infertility underwent a physical examination along with his wife. Genetic testing was performed by whole-exome sequencing of the couple, and Sanger sequencing was performed for validation. Novel biallelic variations in the DNAH1: (NM_015512.4) gene consisting of c.1336G>C (p.E446Q) and c.2912G>A (p.R971H) were identified. In silico structural analysis revealed that the amino acid residues affected by the variation were evolutionarily conserved, and the variant p.R971H influenced the stability of the DNAH1 protein. Morphological studies of the patient's sperm showed defects in its flagella. Results of Papanicolaou staining and scanning electron microscopy demonstrated coiled and short flagella with multiple anomalies. Transmission electron microscopy of the sperm flagella showed that the inner dynein arm and radial spoke were absent, and the dense fiber and microtubule doublets were displaced. Quantitative PCR of the mRNA of the patient's sperm showed that the expression of DNALI1 was dramatically reduced. Collectively, these findings elucidated the genetic cause of the family's infertility and provided insight into the functioning of the DNAH1 gene.

Novel Thermosensitive Core⁻Shell Surface Molecularly Imprinted Polymers Based on SiO2 for the Selective Adsorption of Sulfamethazine.

In this research, a novel, sulfamethazine, thermosensitive, molecularly-imprinted polymer (MIP) with an obvious core⁻shell structure for the enrichment of sulfamethazine (SMZ), which involved temperature sensitive monomer N-Isopropylacrylamide, functional monomer methacrylic acid and cross-linking agents ethyleneglycol dimethacrylate (EGDMA) and N,N'-methylenebisacrylamide, was successfully compounded using the surface polymerization method. To ensure the best experimental group, we designed and compared three groups of controlled experiments of MIPs with different crosslinking agents. When the adsorption temperature was almost the lower critical solution temperature (LCST) of Poly(N-Isopropylacrylamide), the preparative MIPs showed outstanding adsorption capacity and specific identification to sulfamethazine. Moreover, this allowed the MIPs to better facilitate by combining the template molecules, as well as optimizing the imprinting factor. In addition, after 80 min, the adsorption of the MIPs leveled off and remained constant, and the adsorption quantity reached (a maximum of) at 8.1 mg·g-1.

Antimicrobial and antioxidant capacity of glucosamine-zinc(II) complex via non-enzymatic browning reaction.

Coordination compounds play an important role in the life process, and have been widely used in food, cosmetics and pharmaceutical industry. Herein, we have developed a novel kind of glucosamine-zinc(II) complex (GlcN-ZC) for food additive using non-enzymatic browning reaction. The GlcN-ZC was characterized by FTIR and XRD. Moreover, UV absorbance changes, browning intensity, fluorescence changes, antioxidant activity and antimicrobial assessment of GlcN-ZC were also evaluated. Results showed the GlcN-ZC intermediate compounds were accumulated in non-enzymatic browning while prolonging heating time and melanoidins were produced in the final stage. The fluorescence changes confirmed that fluorophores were formed during the non-enzymatic reaction and fluorescence intensity reached a maximun at 60 min. The highest radical scavenging activity of GlcN-ZC formed after 180 min of heating was 79.2%. Furthermore, GlcN-ZC exhibited excellent antibacterial activity against E. coli and S. aureus. Therefore, GlcN-ZC can be used as a novel promising additive in the food industry.

Highly sensitive and selective ion-imprinted polymers based on one-step electrodeposition of chitosan-graphene nanocomposites for the determination of Cr(VI).

A sensitive and selective electrochemical sensor based on ion-imprinted chitosan-graphene nanocomposites (IIP-S) has been developed for the determination of Cr(VI). The ion-imprinted polymers were constructed by one-step electrodeposition. The morphology and structure of IIP-S were characterized by SEM, TEM, XRD, FTIR and EDS, respectively. Meanwhile, the electrochemical behavior of IIP-S was investigated using CV, EIS and DPV. The linear range of IIP-S was from 1.0 × 10-9 to 1.0 × 10-5 mol/L, with the low detection limit of 6.4 × 10-10 mol/L (S/N = 3). The sensor exhibited high selectivity for the determination of Cr(VI) in the presence of Zn(II), Co(II), Cu(II), Ni(II), Mn(II), MnO4-, C2O42-, S2O62- and MoO42- ions. The IIP-S also provided excellent stability and good repeatability that the sensitivity remained 85% after 9 cycles of rebinding-removal, while the sensitivity retained 87% of its initial response storing at 4 °C for 17 days. Moreover, it was successfully applied to the detection of Cr(VI) ions in tap water and river water.

Hierarchically-structured SiO2-Ag@TiO2 hollow spheres with excellent photocatalytic activity and recyclability.

A new protocol for constructing sandwich-like SiO2-Ag@TiO2 hollow spheres (SAT) is introduced, in which SiO2 acts as an efficient support for the Ag nanoparticles (Ag NPs) immobilization, while TiO2 maintains its hierarchical structure and prevents the aggregation of Ag NPs during the photocatalytic reaction. As a photocatalytic agent, the inner and outer surfaces of TiO2 can be fully occupied by pollutants molecules because of its unique structure, which faster boosts the photo-generated electrons to transfer the substrates, leading to an enhanced photocatalytic performance. Compared with Ag NPs deposited on the surface of SiO2@TiO2 (STA), the as-synthesized SAT exhibits a markedly enhanced visible-light and UV light activity than STA for degrading tetracycline and traditional dyes. The excellent photocatalytic performances are ascribed to the enhanced transport paths of photo-generated electrons, reduced recombination probability of e-/h+ pairs, and decreased threat of oxidation and corrosion. Especially, the SAT still maintains its photocatalytic efficiency after five consecutive runs even though the sample is recovered under visible-light irradiation, far beyond the reusability of STA under the same conditions. Therefore, the outstanding photocatalytic activity and excellent recyclability make SAT more potential to purify aquatic contaminants and to meet the demands of future environmental issues.

VEGF-A regulates sFlt-1 production in trophoblasts through both Flt-1 and KDR receptors.

Studies have shown that sFlt-1 overproduction stimulated by excess VEGF of deciduous origin in trophoblasts can cause preeclampsia. However, the mechanism underlying how VEGF regulates sFtl-1 expression in trophoblasts remains unknown. To address this issue, JEG3 and HTR-8/SV neo (HTR8) trophoblast cell lines were used to investigate the signaling pathways involved in the regulation of sFlt-1 production via VEGF overexpression in vitro. JEG3 (VEGF-GFP-JEG3, V-J) and HTR8 (VEGF-GFP-HTR8, V-H) cells overexpressing VEGF165 were established by infecting the JEG3 and HTR8 cell lines with lentivirus expressing VEGF165. Both the mRNA and protein levels of VEGF and sFlt-1 were dramatically up-regulated in the V-J and V-H cells compared to the JEG3 and HTR8 cells, and they were significantly decreased after treatment with an Flt-1 receptor inhibitor (MK-2461), a KDR receptor inhibitor (XL-184), or an Flt-1 and KDR receptor inhibitor (ABT-869). The mRNA levels of sFlt-1, Flt-1, and KDR were increased in V-H cells after treatment, and the VEGF-A mRNA levels were also elevated. The migration and invasion abilities of JEG3 and HTR8 cells were decreased after VEGF overexpression, and this reduction could be reversed with VEGF receptor inhibitor treatment. In addition, after the different treatments, the cell migration rates of V-J cells were significantly increased compared with the control treatment. Taken together, these results indicate that sFlt-1 up-regulation by VEGF may be mediated by the VEGF/Flt-1 and/or VEGF/KDR signaling pathways. However, elucidating which pathway plays this key role requires further investigation.

Thermoswitchable catalysis controlled by reversible dispersion/aggregation change of nanoreactors in the presence of α-CD polymers.

The present work was aimed at preparing a thermosensitive nanoreactor system which could adjust its dispersion/aggregation status according to external temperature change to achieve the switchable catalysis. The mesoporous silica nanoparticle (MSNP) was selected as the framework material of the nanoreactor, and Ag nanoparticles were encapsulated in the mesoporous silica by an in situ reaction. Dodecyl groups were introduced onto MSNP surface, which could transform reversibly between complexation and disassociation with α-cyclodextrin (CD) cavity upon temperature change. It was found that the nanoreactors aggregated and the catalysis was effectively switched 'off' in the presence of CD polymers at low temperature (20 °C). However, when the temperature increased to 50 °C, the nanoreactors redispersed and catalysis successfully switched 'on'.

A Self-Switchable Polymer Reactor for Controlled Catalytic Chemistry Processes with a Hyperbranched Structure.

A self-switchable polymer reactor with a hyperbranched structure for controlled catalytic chemistry processes is reported. This polymer reactor was made of silver nanoparticles and a polymer carrier consisting of hyperbranched polyethylenimine and hydroxyethyl acrylate that behaved as thermally switchable domains. Below the transfer temperature, relatively strong catalytic reactivity was demonstrated due to the leading role of hydrophilic groups in the switchable domains, which opened access to the substrate for the packaged silver nanoparticles. In contrast, it showed weak catalysis at relatively high temperatures, reducing from the significantly increased hydrophobicity in the switchable domains. In this way, the polymer reactor displays controllable, tunable, catalytic activity based on this approach. This novel design opens up the opportunity to develop intelligent polymer reactors for controlled catalytic processes.

An enzyme-like imprinted-polymer reactor with segregated quantum confinements for a tandem catalyst.

This study was aimed at addressing the present challenge in tandem catalysts, as to how to furnish catalysts with tandem catalytic-ability without involving the precise control and man-made isolation of different types of catalytic sites. This objective was realized by constructing an enzyme-like imprinted-polymer reactor made of a unique polymer composite inspired from the compartmentalization of cells, a composite of a reactive imprinted polymer (containing acidic catalytic sites), and encapsulated metal nanoparticles (acting as catalytic reduction sites). The compilation of two types of catalytic sites with admissible access allowed this reactor to behave like compartments of cells for enzymatic reactions and hence catalytically constituted two quantum interaction-segregated domains, which led to the occurrence of catalytic tandem processes. Unlike the reported functional reactors that run tandem catalysis by largely depending on the precise control and man-made isolation of different types of catalytic sites, tandem catalysis in this reactor run naturally with segregated quantum confinements, which does not involve the precise control and isolation of different types of catalytic sites. This protocol presents new opportunities for the development of functional catalysts for complicated chemical processes.

A thermoresponsive nanorattle containing two different catalysts for controllable one-pot tandem catalysis.

In the present work, a thermoresponsive nanorattle with a Ag nanoparticle (NP) core (one catalyst in the nanorattle), and a poly(N-isopropylacrylamide) shell was developed. An imidazole group was grafted on the polymer shell by copolymerization as the other catalyst. Owing to the catalytic activities of the imidazole group and Ag NP with regards to hydrolysis and reduction, respectively, this nanorattle exhibited tandem-reaction catalytic abilities. In addition, because of the shrinkage of the poly(N-isopropylacrylamide) shell at high temperatures, the tandem reaction could be controlled to stop at the first reaction step. That is to say, only the hydrolysis reaction was catalyzed by the imidazole group being grafted on the surface of the shell. The reduction step in the tandem reaction catalyzed by the Ag particle, however, was switched off by the shrinkage of the poly(N-isopropylacrylamide) shell. This protocol opens up an opportunity to develop controllable catalysts for complicated chemical processes.

A convenient separation method for di(2-ethylhexyl)phthalate by novel superparamagnetic molecularly imprinted polymers.

Through a surface molecular imprinting technique and coating superparamagnetic Fe3O4 nanoparticles with molecularly imprinted polymers (MIPs), a novel magnetic molecularly imprinted polymer (MMIP) was successfully fabricated for the convenient separation of di(2-ethylhexyl)phthalate (DEHP) with methacrylic acid as functional monomer, ethylene glycol dimethacrylate as cross linker and 2,2-azobis(isobutyronitrile) as initiator. A magnetic non-molecularly imprinted polymer (MNIP) was also prepared for comparison purposes. The morphology structure and the magnetic properties of MMIP were characterized by transmission electron microscopy (TEM), Fourier transform infrared spectrometry (FT-IR), X-ray diffraction, vibrating sample magnetometry (VSM) and thermo gravimetric analysis (TGA). The adsorption properties of MMIP and MNIP were investigated by static and dynamic adsorption experiments. The results show that the diameter of the synthesized MMIP microspheres is about 300-500 nm with good dispersibility in solvent. The prepared MMIP shows superparamagnetic properties with the maximum saturation magnetic intensity of 43.97 emu g-1, and it can be conveniently separated using an external magnetic field. Compared with MNIP, MMIP has a higher adsorption capacity and better adsorption selectivity for DEHP, and the imprinting factor reaches 3.012. The regeneration adsorption experiment illuminates that the novel MMIP can be reused with good separation efficiency.