Neural sensory stimulation does not interfere with the H-reflex in individuals with lower limb amputation.

Introduction: Individuals with lower limb loss experience an increased risk of falls partly due to the lack of sensory feedback from their missing foot. It is possible to restore plantar sensation perceived as originating from the missing foot by directly interfacing with the peripheral nerves remaining in the residual limb, which in turn has shown promise in improving gait and balance. However, it is yet unclear how these electrically elicited plantar sensation are integrated into the body's natural sensorimotor control reflexes. Historically, the H-reflex has been used as a model for investigating sensorimotor control. Within the spinal cord, an array of inputs, including plantar cutaneous sensation, are integrated to produce inhibitory and excitatory effects on the H-reflex. Methods: In this study, we characterized the interplay between electrically elicited plantar sensations and this intrinsic reflex mechanism. Participants adopted postures mimicking specific phases of the gait cycle. During each posture, we electrically elicited plantar sensation, and subsequently the H-reflex was evoked both in the presence and absence of these sensations. Results: Our findings indicated that electrically elicited plantar sensations did not significantly alter the H-reflex excitability across any of the adopted postures. Conclusion: This suggests that individuals with lower limb loss can directly benefit from electrically elicited plantar sensation during walking without disrupting the existing sensory signaling pathways that modulate reflex responses.

Enhancing quorum quenching media with 3D robust electrospinning coating: A novel biofouling control strategy for membrane bioreactors.

Bacterial quorum quenching (QQ) is an effective strategy for controlling biofouling in membrane bioreactor (MBR) by interfering the releasing and degradation of signal molecules during quorum sensing (QS) process. However, due to the framework feature of QQ media, the maintenance of QQ activity and the restriction of mass transfer threshold, it has been difficult to design a more stable and better performing structure in a long period of time. In this research, electrospun fiber coated hydrogel QQ beads (QQ-ECHB) were fabricated by using electrospun nanofiber coated hydrogel to strengthen layers of QQ carriers for the first time. The robust porous PVDF 3D nanofiber membrane was coated on the surface of millimeter-scale QQ hydrogel beads. Biocompatible hydrogel entrapping quorum quenching bacteria (sp.BH4) was employed as the core of the QQ-ECHB. In MBR with the addition of QQ-ECHB, the time to reach transmembrane pressure (TMP) of 40 kPa was 4 times longer than conventional MBR. The robust coating and porous microstructure of QQ-ECHB contributed to keeping a lasting QQ activity and stable physical washing effect at a very low dosage (10g beads/5L MBR). Physical stability and environmental-tolerance tests also verified that the carrier can maintain the structural strength and keep the core bacteria stable when suffering long-term cyclic compression and great fluctuations in sewage quality.

Long-term impacts of polyethylene terephthalate (PET) microplastics in membrane bioreactor.

Due to the mass production and daily use of plastic products, the potential toxicity of microplastics to the water environment has attracted worldwide attention. In this work, the effect of typical microplastics (PET) on the performance of activated sludge from membrane bioreactors (MBR) was evaluated. The impacts on biological removal efficiency were unconspicuous with continuous dosing of 60 particles/L. However, further investigations revealed that PET particle accumulation caused adverse impacts on settleability and dewaterability. The SVI value increased from 53.3 ml/g MLSS to 69.9 ml/g MLSS and the CST in the PET reactor increased by 22%. Nevertheless, hydrophobicity was reduced by 49.2%. Mechanism studies exposed that the PET microplastics accumulation improved extracellular polymeric substances (EPS) from 116.96 mg/L to 138.70 mg/L and caused cell membrane damage. The abundance and diversity of microbial community reduced in activated sludge in PET reactor compared with control reactor. These phenomena revealed a possible hypothesis that the microplastic particles increased EPS and cytotoxicity of activated sludge. However, the rate of transmembrane pressure (TMP) build-up was significantly mitigated in PET-MBR compared to that in a control-MBR (1.27 folds), which attributes that physical scour of particles may still alleviate membrane contamination in MBR.

Investigation of the adsorption behavior of Pb(II) onto natural-aged microplastics as affected by salt ions.

In this study, the adsorption behavior of Pb(II) on natural-aged and virgin microplastics in different electrolyte solutions was investigated. The results demonstrated that natural-aged microplastics exhibited higher adsorption capacity for Pb(II) compared to virgin ones, and the addition of CaCl2 strongly inhibited the adsorption amount of Pb(II). The adsorption kinetics of Pb(II) adsorption were better fitted by the pseudo-second order model and Elovich equation, and were slowed down greatly at higher ionic strength. The rate-limiting steps of adsorption process were dominated by intra-particle diffusion. The adsorption isotherm of Pb(II) onto microplastics affected by salt ions can be well described by Freundlich model, the greater adsorption efficiency of natural-aged microplastics proved that adsorption process was multilayer and heterogeneous. In addition, pH significantly influenced the adsorption of Pb(II) due to the changes electrostatic interactions. The effect of fulvic acid in the electrolyte solutions was also revealed and attributed to the complexation with Na+ and Ca2+. Furthermore, the higher pH and ionic strength in different environmental water dramatically decreased adsorption capacity onto microplastics. Finally, it's confirmed that the adsorption mechanisms affected by salt ions mainly involve electrostatic interaction, surface complexation, and ionic exchange. These findings indicate that salt ions exert an important influence on the adsorption of heavy metals for MPs, which should be further concerned.

Effect of potassium persulphate addition on sludge disintegration of a mesophilic anaerobic fermentation system.

Persulphates, an advanced oxidation process, has been recently used as an alternative pretreatment method to enhance short-chain fatty acids (SCFAs) yield from waste-activated sludge (WAS) anaerobic fermentation (AF). But so far, the effects of peroxydisulphate (PDS) dosages on mesophilic anaerobic fermentation are still not studied fully. Herein, we explored the influences of potassium PDS addition on mesophilic AF of WAS. Notably, the addition of PDS could drastically accelerate WAS solubilization and hydrolysis, which was proportional to the amount of PDS. The maximal total SCFAs yield of 249.14 mg chemical oxygen demand/L was obtained with 120 mg PDS/g suspended solids addition at 6 days of AF, which was 2.2-fold that of the control one. Tightly bound extracellular polymeric substances (EPSs) were transformed into loosely bound EPS and dissolved organic matters, and aromatic proteins and humic-like substances of EPSs were disintegrated, which were caused by the devastating effects of PDS treatments on EPSs disruption. The intracellular constituents of microbial cells in the sludge were released accordingly. As a result, there was release of soluble substrates derived from the disintegration of both EPSs and cells, the amounts of which were proportional to the dose of PDS. Moreover, microbial diversity and richness were both decreased in the presence of PDS, and the relative abundance of phyla Actinobacteria increased with the increase of the PDS dosage. In addition, the stability of sludge flocs was destroyed in the presence of PDS, the distribution of particle size tended to be small and dispersive, and dewaterability of the sludge was deteriorated.

Microplastics as a vehicle of heavy metals in aquatic environments: A review of adsorption factors, mechanisms, and biological effects.

Microplastics (MPs) have recently attracted much attention due to their widespread distribution in the aquatic environment. Microplastics can act as a vector of heavy metals in the aquatic environment, causing a potential threat to aquatic organisms and human health. This review mainly summarized the occurrence of microplastics in the aquatic environment and their interaction with heavy metals. Then, we considered the adsorption mechanisms of MPs and heavy metals, and further critically discussed the effects of microplastics properties and environmental factors (e.g., pH, DOM, and salinity) on the adsorption of heavy metals. Finally, the potential risks of combined exposure of MPs and heavy metals to aquatic biota were briefly evaluated. This work aims to provide a theoretical summary of the interaction between MPs and heavy metals, and is expected to serve as a reference for the accurate assessment of their potential risks in future studies.

QQ-PAC core-shell structured quorum quenching beads for potential membrane antifouling properties.

Quorum quenching (QQ) has been proven to be an effective method to reduce MBR membrane biological contamination. In this paper, a novel and efficient QQ-PAC core-shell beads were prepared for mitigating the membrane contamination. The bead was composed of two parts: QQ bacteria embedded in the core and PAC in the shell. The microstructure of the bead was observed by scanning electron microscopy (SEM) and the functional groups were revealed by Fourier transform infrared spectroscopy (FTIR). Meanwhile, the mechanical strength, swelling property, penetration property and QQ activity of the core bead, the core shell-without PAC bead and the core shell-with PAC bead were compared. The core shell-with PAC structure improved the adsorption capacity under good mass transfer conditions. Besides, the combined effect of QQ bacteria and PAC enhanced the QQ effect and alleviated the process of MBR membrane biological contamination consequently. Therefore, the QQ-PAC core-shell beads have a potential possibility in MBR membrane fouling control as the immobilization technology of QQ bacteria.

Optimization of startup and shutdown operation of simulated moving bed chromatographic processes.

This paper presents new multistage optimal startup and shutdown strategies for simulated moving bed (SMB) chromatographic processes. The proposed concept allows to adjust transient operating conditions stage-wise, and provides capability to improve transient performance and to fulfill product quality specifications simultaneously. A specially tailored decomposition algorithm is developed to ensure computational tractability of the resulting dynamic optimization problems. By examining the transient operation of a literature separation example characterized by nonlinear competitive isotherm, the feasibility of the solution approach is demonstrated, and the performance of the conventional and multistage optimal transient regimes is evaluated systematically. The quantitative results clearly show that the optimal operating policies not only allow to significantly reduce both duration of the transient phase and desorbent consumption, but also enable on-spec production even during startup and shutdown periods. With the aid of the developed transient procedures, short-term separation campaigns with small batch sizes can be performed more flexibly and efficiently by SMB chromatography.

Optimization of simulated moving bed chromatography with fractionation and feedback: part I. Fractionation of one outlet.

A novel modification of simulated moving bed (SMB) technology, referred to as fractionation and feedback SMB (FF-SMB), has been introduced recently. This concept is based on fractionating one or both outlet streams and feeding the off-spec fractions back into the unit alternatingly with the original feed mixture. In this paper, the optimization problem of FF-SMB realizing one outlet fractionation is considered. A mathematical optimization framework based on a detailed process model is presented which allows to evaluate quantitatively the potential of this operating scheme. Detailed optimization studies have been carried out for a difficult separation characterized by small selectivity and low column efficiency. The results reveal that the proposed fractionation and feedback regime can be significantly superior to the classical SMB chromatography, in terms of both feed throughput and desorbent consumption. The effect of the feeding sequence on the performance of FF-SMB is also examined.

Optimization of simulated moving bed chromatography with fractionation and feedback: part II. Fractionation of both outlets.

A new improvement based on outlet fractionation and feedback has been developed for simulated moving bed (SMB) chromatography. In this contribution, this fractionation and feedback SMB (FF-SMB) concept is extended to the general scenario which integrates a simultaneous fractionation of both outlet streams. A model-based optimization approach, previously adopted to investigate single fractionation, is extended to consider this flexible fractionation policy. Quantitative optimization studies based on a specific separation problem reveal that the double fractionation is the most efficient operating scheme in terms of maximum feed throughput, while the two existing single fractionation modes discussed in our previous study are also significantly superior to the conventional SMB operation. The advantages of the double fractionation extension are further demonstrated in terms of several more detailed performance criteria. In order to evaluate the applicability of the fractionation and feedback modification, the effect of product purity, adsorption selectivity, column efficiency and column number on the relative potential of FF-SMB over SMB is examined.