[Radiographic parameters and influencing factors of paraspinal muscle degeneration in healthy people].

Objective: To measure the paraspinal muscle parameters, explore the characteristics of paraspinal muscles, and investigate the influence factors of paraspinal muscle degeneration in healthy people. Methods: Eighty-two healthy Chinese people were prospectively recruited between February 2020 and November 2020, including 36 males and 46 females. The age ranged from 21 to 75 years, with a mean of 48.0 years. The height ranged from 150 to 183 cm, with a mean of 165.6 cm. The body mass ranged from 43 to 100 kg, with a mean of 65.4 kg. The body mass index (BMI) ranged from 16.7 to 32.4 kg/m 2, with a mean of 23.7 kg/m 2. Parameters of the paraspinal muscles (multifidus muscle, erector spinae muscle, and psoas major muscle) at L 3, L 4, and L 5 levels were measured by MRI, including the relative total cross-sectional area (rtCSA), relative fatty cross-sectional area (rfCSA), relative signal intensity (rSI), and fatty infiltration (FI). The differences of paraspinal muscle parameters at different genders and different measurement levels were compared; Pearson or Spearman correlation analysis was used to explore the relationship between paraspinal muscle parameters and age, height, body mass, BMI. Results: From L 3 to L 5 level, the rtCSA and rfCSA of multifidus muscle and psoas major muscle as well as the rfCSA of erector spinae muscle increased, while rtCSA of erector spinae muscle decreased. The FI and rSI of paraspinal muscles increased gradually. The parameters of paraspinal muscles at L 4 and L 5 levels were significantly different from those at L 3 levels ( P<0.05). There were significant differences in rtCSA and rfCSA of multifidus muscle, rtCSA, FI, and rSI of erector spinae muscle as well as rtCSA, rfCSA, and FI of psoas major muscle between L 4 and L 5 levels ( P<0.05). Compared with males, the rfCSA and FI of multifidus muscle, FI of erector spinae muscle, and FI of psoas major muscle were significantly higher in females, while the rtCSA of psoas major muscle was significantly lower ( P<0.05). Age was significantly negatively correlated with rtCSA of paraspinal muscles ( P<0.05), but significantly positively correlated with FI of paraspinal muscles, rfCSA and rSI of multifidus and erector spinae muscles ( P<0.05). Height was significantly negatively correlated with rfCSA and FI of paraspinal muscles ( P<0.05). Conclusion: The degree of paraspinal muscle degeneration increases gradually along the spine axis from head to tail. Paraspinal muscle degeneration is related to age, height, and gender. The relationship between the body mass, BMI and paraspinal muscle degeneration needs further study.

Impact of postoperative spinal malalignment on postoperative health-related quality of life after long-level fixation for degenerative lumbar scoliosis: does residual coronal angularity matter?

PURPOSE: This study evaluates the influence of spinal malalignment on health-related quality of life (HRQOL) in a long-level fusion spine. METHODS: This was a retrospective analysis of 121 consecutive patients with DLS after long-segment fusion. HRQOL and radiographic parameters were collected at final follow-up. For postoperative residual Cobb angle (CA), patients were divided as follows: group (0) (CA < 10°), group (+) (CA 10°âˆ¼20 °), and group (++) (CA > 20°). For postoperative coronal vertical axis (CVA), patients were separated as follows: group (0) (CVA < 2 cm), group (+) (CVA 2 ∼ 3 cm), and group (++) (CVA > 3 cm). Patients were also grouped by the sagittal modifiers as group (0), group (+), and group (++) according to the Scoliosis Research Society (SRS)-Schwab classification, respectively. RESULTS: Visual analog scale (VAS) for back was significantly lower in CA 10°âˆ¼20° group compared to other groups. Patients with remnant CA > 20° showed worse Oswestry Disability Index (ODI), SRS-22 and the 36-item Short Form Health Survey (SF-36) - physical component scores (PCS). Sagittal vertical axis (SVA) showed significant correlation with HRQOLs after surgery, and the statistical significance of ODI, SRS-22 and SF-36 scores was observed among subgroups. CONCLUSIONS: In long-level fused spine, residual CA > 20° resulted in worse clinical outcomes and was recommended to avoid during surgery. And 10° to 20° residual CA was acceptable in DLS patients and even better than Cobb angle < 10° in several HRQOLs, therefore strictly pursing upright alignment seems unnecessary. SVA also showed effectiveness in assessing HRQOL in the fixed spine.

Biomechanical analysis of spinal cord injury during scoliosis correction surgery.

Introduction: Surgical correction is a common treatment for severe scoliosis. Due to the significant spinal deformation that occurs with this condition, spinal cord injuries during corrective surgery can occur, sometimes leading to paralysis. Methods: Such events are associated with biomechanical changes in the spinal cord during surgery, however, their underlying mechanisms are not well understood. Six patient-specific cases of scoliosis either with or without spinal complications were examined. Finite element analyses (FEA) were performed to assess the dynamic changes and stress distribution of spinal cords after surgical correction. The FEA method is a numerical technique that simplifies problem solving by replacing complex problem solving with simplified numerical computations. Results: In four patients with poor prognosis, there was a concentration of stress in the spinal cord. The predicted spinal cord injury areas in this study were consistent with the clinical manifestations of the patients. In two patients with good prognosis, the stress distribution in the spinal cord models was uniform, and they showed no abnormal clinical manifestations postoperatively. Discussion: This study identified a potential biomechanical mechanism of spinal cord injury caused by surgical correction of scoliosis. Numerical prediction of postoperative spinal cord stress distribution might improve surgical planning and avoid complications.

Posterior thoracic antedisplacement and fusion surgery for a special type of ossification of the posterior longitudinal ligament in the thoracic spine: indications and preliminary clinical results of 2-year follow-up.

OBJECTIVES: To describe a novel technique, posterior thoracic antedisplacement and fusion (PTAF), for a special type of ossification of the posterior longitudinal ligament in the thoracic spine (T-OPLL), and to evaluate its safety and efficacy. METHODS: From July to December 2020, five consecutive patients with beak-type T-OPLL located at the thoracic vertebral body (VB) level underwent PTAF surgery. Their demographic data, radiological parameters, perioperative complications, and surgery-related findings were recorded and analyzed. The surgical outcomes were assessed using a modified Japanese Orthopedic Association (mJOA) scale, and the recovery rate (RR) was calculated using the Hirabayashi's method. RESULTS: All patients were followed up for at least two years. The mean thickness of OPLL was 9.4 ± 1.0 mm, and the OPLL spinal canal occupying ratio was 67.7% ± 8.5%. Postoperatively, the mean antedisplacement distance of OPLL was 8.1 ± 1.8 mm, and the average shortened distance of the spinal column was 6.0 ± 1.13 mm. The mean operation time and blood loss were 158.2 ± 26.3 min and 460 ± 89.4 mL, respectively. Perioperative complications were cerebrospinal fluid leakage and instrument failure, 2 cases each. The mean mJOA score was increased from 3.6 ± 2.9 before surgery to 9.4 ± 3.0 at the last follow-up, and the average RR was 84.2 ± 30.5%. CONCLUSION: The preliminary clinical outcomes indicate that PTAF is a safe and effective method for the treatment of beak-type T-OPLL, which has its apex located at the VB level and has a high spinal canal occupation ratio.

Revealing the novel metabolism-related genes in the ossification of the ligamentum flavum based on whole transcriptomic data.

Backgrounds: The ossification of the ligamentum flavum (OLF) is one of the major causes of thoracic myelopathy. Previous studies indicated there might be a potential link between metabolic disorder and pathogenesis of OLF. The aim of this study was to determine the potential role of metabolic disorder in the pathogenesis of OLF using the strict bioinformatic workflow for metabolism-related genes and experimental validation. Methods: A series of bioinformatic approaches based on metabolism-related genes were conducted to compare the metabolism score between OLF tissues and normal ligamentum flavum (LF) tissues using the single sample gene set enrichment analysis. The OLF-related and metabolism-related differentially expressed genes (OMDEGs) were screened out, and the biological functions of OMDEGs were explored, including the Gene Ontology enrichment analysis, Kyoto Encyclopedia of Genes and Genomes enrichment analysis, and protein-protein interaction. The competing endogenous RNA (ceRNA) network based on pairs of miRNA-hub OMDEGs was constructed. The correlation analysis was conducted to explore the potential relationship between metabolic disorder and immunity abnormality in OLF. In the end, the cell experiments were performed to validate the roles of GBE1 and TNF-α in the osteogenic differentiation of LF cells. Results: There was a significant difference of metabolism score between OLF tissues and normal LF tissues. Forty-nine OMDEGs were screened out and their biological functions were determined. The ceRNA network containing three hub OMDEGs and five differentially expressed miRNAs (DEmiRNAs) was built. The correlation analysis between hub OMDEGs and OLF-related infiltrating immune cells indicated that metabolic disorder might contribute to the OLF via altering the local immune status of LF tissues. The cell experiments determined the important roles of GBE1 expression and TNF-α in the osteogenic differentiation of LF cells. Conclusions: This research, for the first time, preliminarily illustrated the vital role of metabolic disorder in the pathogenesis of OLF using strict bioinformatic algorithms and experimental validation for metabolism-related genes, which could provide new insights for investigating disease mechanism and screening effective therapeutic targets of OLF in the future.

Searching for the optimal precondition procedure for mesenchymal stem/stromal cell treatment: Facts and perspectives.

Mesenchymal stem/stromal cells are potential optimal cell sources for stem cell therapies, and pretreatment has proven to enhance cell vitality and function. In a recent publication, Li et al explored a new combination of pretreatment conditions. Here, we present an editorial to comment on their work and provide our view on mesenchymal stem/stromal cell precondition.

Patient-specific 3D-printed Brace for Adolescent Idiopathic Scoliosis: A Prospective Cohort Study.

OBJECTIVE: To evaluate the efficacy, safety of patient-tailored 3D printed brace in the treatment of adolescent idiopathic scoliosis (AIS), and to compare the health-related quality of life (HRQoL) of patients treated with two different types of brace. MATERIALS AND METHODS: From September 2017 to August 2020, 103 AIS patients requiring non-operative management were prospectively recruited in this study. All patients were followed up every 6 months, clinical and radiological examination were assessed at each follow-up time. Full-length anteroposterior X-ray of the spine in the standing position was performed obtained. At the last follow-up, each patient completed a standardized HRQoL questionnaire. Compliance is defined as that the patient insists on wearing the brace for ≥ 23h every day (full-time wearing) and follow-up every 6 months until bone maturity.The rate of major curve Cobb progression was defined that maximum Cobb Angle of major curve greater than 6° compared with that at the initial diagnosis, or aggravated to more than 45° so that orthopedic surgery was recommended during treatment, which was defined as the rate of conversion to surgery. The effects of these two types of braces on the rate of major curve Cobb progression and HRQoL were analyzed by independent sample t-test ad Chi-square test. RESULTS: The thickness was 4 mm for thoracolumbosacral orthosis (TLSO) and 3 mm for 3D-printed brace (3DPB). In addition, compared with the material used in TLSO, the weight (600-800 grams) of the 3DPB materials with the same area is reduced by about 25-30%. 55 patients (49.1%) and 48 patients (33.1%) were respectively included in the 3DPB cohort and the TLSO cohort.The maximum Cobb angle of major curve in the 3DPB cohort was significantly lower than those in the TLSO cohort at 6 months, 12 months and the last follow-up (p < 0.01). The thoracic kyphosis (TK) and lumbar lordosis (LL) of the two cohorts at the last follow-up were lower than those before brace treatment, in addition, there was a significant difference in TK (p = 0.001) and LL (p = 0.004) between the two cohorts at the follow-up. The scores of physical function, pain, self-image, mental health and treatment satisfaction in the Chinese version of SRS-22 in the 3DPB cohort were higher than those in the TLSO cohort (p < 0.01 and p < 0.05, respectively). The scores of the 3DPB cohort were significantly higher than those of the TLSO group in the four dimensions (p = 0.008, 0.013, 0.015, and 0.002, respectively) of the EuroQol-5D health description system except for mobility, and the overall health status of EuroQol-5D was higher for the 3DPB cohort (p < 0.001). At the last follow-up, One patient in the 3DPB cohort and ten patients in the TLSO cohort had major curve Cobb progression of greater than 6°, and the rate of major curve Cobb progression in 3DPB cohort was significantly lower than that in the TLSO cohort (OR 14.2, 95% CI 1.7∼115.8, p < 0.01). One patient in the 3DPB and seven patients in the TLSO cohorts received subsequent surgery or was recommended for surgery, and the rate of conversion to surgery was significantly lower than in the 3DPB cohort (OR 9.2, 95% CI 1.1∼77.9, p < 0.05). CONCLUSIONS: Patient-tailored 3D-printed brace is lighter, thinner, and more comfortable than conventional braces in the treatment of AIS. It can substantially improve the HRQoL of patients and can significantly reduce the progression of major curve Cobb progression and rate of conversion of surgery.

Paraspinal muscle endurance and morphology (PMEM) score: a new method for prediction of postoperative mechanical complications after lumbar fusion.

BACKGROUND CONTEXT: Although the relationships between paraspinal muscles and lumbar degenerative disorders have been acknowledged, paraspinal muscle evaluation has not been incorporated into clinical therapies. PURPOSE: We aimed to establish a novel paraspinal muscle endurance and morphology (PMEM) score to better predict mechanical complications after lumbar fusion. STUDY DESIGN: Prospective cohort study. PATIENT SAMPLE: A total of 212 patients undergoing posterior lumbar interbody fusion with at least 1 year of follow-up were finally included. OUTCOME MEASURES: Mechanical complications including screw loosening, pseudarthrosis and other complications like cage subsidence, and patient-reported outcomes were evaluated at last follow-up. METHODS: The PMEM score comprised 1 functional muscular parameter (the performance time of the endurance test) and 2 imaging muscular parameters (relative functional cross-sectional area [rFCSA] of paraspinal extensor muscles [PEM] and psoas major [PS] on magnetic resonance imaging). The score was established based on a weighted scoring system created by rounding ß regression coefficients to the nearest integer in univariate logistic regression. The diagnostic performance of the PMEM score was determined by binary logistic regression model and receiver operating characteristic (ROC) curve with the area under the curve (AUC). Additionally, pairwise comparisons of ROC curves were conducted to compare the diagnostic performance of the PMEM score with conventional methods based on a single muscular parameter. Moreover, differences of mechanical complications and patient-reported outcomes among the PMEM categories were analyzed using Chi-square test with Bonferroni correction. RESULTS: The PMEM score, calculated by adding the scores for each parameter, ranges from 0 to 5 points. Patients with higher PMEM scores exhibited higher rates of mechanical complications (p<.001). Binary logistic regression revealed that the PMEM score was an independent factor of mechanical complications (p<.001, OR=2.002). Moreover, the AUC of the PMEM score (AUC=0.756) was significantly greater than those of the conventional methods including the endurance test (AUC=0.691, Z=2.036, p<.05), PEM rFCSA (AUC=.690, Z=2.016, p<.05) and PS rFCSA (AUC=0.640, Z=2.771, p<.01). In terms of the PMEM categories, a score of 0-1 was categorized as low-risk muscular state of mechanical complications; 2-3, as moderate; and 4-5, as high-risk state. Moving from the low-risk state to the high-risk state, there was a progressive increase in the rates of mechanical complications (13.8% vs. 32.1% vs. 72.7%; p<.001), and a decrease in the rates of clinically significant improvement of patient-reported outcomes (all p<.05). CONCLUSIONS: The PMEM score might comprehensively evaluate paraspinal muscle degeneration and exhibit greater ability in predicting mechanical complications than the conventional evaluations after lumbar fusion. Surgeons might develop individualized treatment strategy tailored to different muscle degeneration statuses reflected by the PMEM score for decreasing the risk of mechanical complications.

An overview of magnesium-based implants in orthopaedics and a prospect of its application in spine fusion.

Due to matching biomechanical properties and significant biological activity, Mg-based implants present great potential in orthopedic applications. In recent years, the biocompatibility and therapeutic effect of magnesium-based implants have been widely investigated in trauma repair. In contrast, the R&D work of Mg-based implants in spinal fusion is still limited. This review firstly introduced the general background for Mg-based implants. Secondly, the mechanical properties and degradation behaviors of Mg and its traditional and novel alloys were reviewed. Then, different surface modification techniques of Mg-based implants were described. Thirdly, this review comprehensively summarized the biological pathways of Mg degradation to promote bone formation in neuro-musculoskeletal circuit, angiogenesis with H-type vessel formation, osteogenesis with osteoblasts activation and chondrocyte ossification as an integrated system. Fourthly, this review followed the translation process of Mg-based implants via updating the preclinical studies in fracture fixation, sports trauma repair and reconstruction, and bone distraction for large bone defect. Furthermore, the pilot clinical studies were involved to demonstrate the reliable clinical safety and satisfactory bioactive effects of Mg-based implants in bone formation. Finally, this review introduced the background of spine fusion surgeryand the challenges of biological matching cage development. At last, this review prospected the translation potential of a hybrid Mg-PEEK spine fusion cage design.

Modified pedicle subtraction osteotomy for osteoporotic vertebral compression fractures: a retrospective study of 104 patients.

BACKGROUND: Osteoporotic vertebral compression fractures (OVCF) caused by osteoporosis is a common clinical fracture type. There are many surgical treatment options for OVCF, but there is a lack of comparison among different options. Therefore, we counted a total of 104 cases of OVCF operations with different surgical plans, followed up the patients, and compared the surgical outcome indications before, after and during the follow-up. METHOD: 104 patients who underwent posterior osteotomy (Modified PSO, SPO, PSO, VCR) and kyphosis correction surgery at our hospital between April 2006 and August 2021 with a minimum follow-up period of 24 months were included. All cases were injuries induced by a fall incurred while standing or lifting heavy objects without high-energy trauma. The mean CT value was 71 HU, which was below 110 HU, indicating severe osteoporosis. The indications for surgery included gait disturbance due to severe pain with pseudarthrosis, increased kyphotic angle, and progressive neurological symptoms. Pre- and postoperative CL, TLK, TK, PrTK, TKmax, GK, LL, PI, SS, PT, SVA, TPA, were investigated radiologically. Additionally, We evaluated estimated blood loss, surgical time and perioperative symptom. RESULT: The results show, after operation, TLK (37.32 ± 10.61° vs. 11.01 ± 8.06°, P < 0.001), TK (35.42 ± 17.64° vs. 25.62 ± 12.24°, P < 0.001), TKmax (49.71 ± 16.32° vs. 24.12 ± 13.34°, P < 0.001), SVA (44.91 ± 48.67 vs. 23.52 ± 30.21, P = 0.013), CL (20.23 ± 13.21° vs. 11.45 ± 9.85°, P = 0.024) and TPA (27.44 ± 12.76° vs. 13.91 ± 9.24°, P = 0.009) were improved significantly in modified Pedicle subtraction osteotomy (mPSO) after operation. During follow-up, TLK (37.32 ± 10.61° vs. 13.88 ± 10.02°, P < 0.001) and TKmax (49.71 ± 16.32° vs. 24.12 ± 13.34°, P < 0.001) were improved significantly in Modified PSO group. In additon, estimated blood loss (790.0 ± 552.2 ml vs. 987.0 ± 638.5 ml, P = 0.038), time of operation (244.1 ± 63.0 min vs. 292.4 ± 87.6 min, P = 0.025) were favorable in Modified PSO group compared to control group. CONCLUSION: To conclude, mPSO could acquire a favorable degree of kyphosis correction as well as fewer follow-up complications. Compared with other surgical methods, it also has the advantages of less surgical trauma and shorter operation time. It can be an effective solution for the treatment of OVCF.

Preoperative and follow-up variations of psoas major muscle are related to S1 screw loosening in patients with degenerative lumbar spinal stenosis.

BACKGROUND: It was reported the paraspinal muscle played an important role in spinal stability. The preoperative paraspinal muscle was related to S1 screw loosening. But the relationship between preoperative and postoperative change of psoas major muscle (PS) and S1 pedicle screw loosening in degenerative lumbar spinal stenosis (DLSS) patients has not been reported. This study investigated the effects of preoperative and follow-up variations in the psoas major muscle (PS) on the first sacral vertebra (S1) screw loosening in patients with DLSS. METHODS: 212 patients with DLSS who underwent lumbar surgery were included. The patients were divided into the S1 screw loosening group and the S1 screw non-loosening group. Muscle parameters were measured preoperatively and at last follow-up magnetic resonance imaging. A logistic regression analysis was performed to investigate the risk factors for S1 screw loosening. RESULTS: The S1 screw loosening rate was 36.32% (77/212). The relative total cross-sectional areas and relative functional cross-sectional areas (rfCSAs) of the PS at L2-S1 were significantly higher after surgery. The increased rfCSA values of the PS at L3-S1 in the S1 screw non-loosening group were significantly higher than those in the S1 screw loosening group. The regression analysis showed male, lower CT value of L1 and longer segment fusion were independent risk factors for S1 screw loosening, and postoperative hypertrophy of the PS was a protective factor for S1 screw loosening. CONCLUSIONS: Compared to the preoperative muscle, the PS size increased and fatty infiltration decreased after surgery from L2-3 to L5-S1 in patients with DLSS after short-segment lumbar fusion surgery. Postoperative hypertrophy of the PS might be considered as a protective factor for S1 screw loosening. MRI morphometric parameters and postoperative selected exercise of PS for DLSS patients after posterior lumbar fusion surgery might contribute to improvement of surgical outcome.

Mimicking the mechanical properties of cortical bone with an additively manufactured biodegradable Zn-3Mg alloy.

Additively manufactured (AM) biodegradable zinc (Zn) alloys have recently emerged as promising porous bone-substituting materials, due to their moderate degradation rates, good biocompatibility, geometrically ordered microarchitectures, and bone-mimicking mechanical properties. While AM Zn alloy porous scaffolds mimicking the mechanical properties of trabecular bone have been previously reported, mimicking the mechanical properties of cortical bone remains a formidable challenge. To overcome this challenge, we developed the AM Zn-3Mg alloy. We used laser powder bed fusion to process Zn-3Mg and compared it with pure Zn. The AM Zn-3Mg alloy exhibited significantly refined grains and a unique microstructure with interlaced α-Zn/Mg2Zn11 phases. The compressive properties of the solid Zn-3Mg specimens greatly exceeded their tensile properties, with a compressive yield strength of up to 601 MPa and an ultimate strain of >60 %. We then designed and fabricated functionally graded porous structures with a solid core and achieved cortical bone-mimicking mechanical properties, including a compressive yield strength of >120 MPa and an elastic modulus of ≈20 GPa. The biodegradation rates of the Zn-3Mg specimens were lower than those of pure Zn and could be adjusted by tuning the AM process parameters. The Zn-3Mg specimens also exhibited improved biocompatibility as compared to pure Zn, including higher metabolic activity and enhanced osteogenic behavior of MC3T3 cells cultured with the extracts from the Zn-3Mg alloy specimens. Altogether, these results marked major progress in developing AM porous biodegradable metallic bone substitutes, which paved the way toward clinical adoption of Zn-based scaffolds for the treatment of load-bearing bony defects. STATEMENT OF SIGNIFICANCE: Our study presents a significant advancement in the realm of biodegradable metallic bone substitutes through the development of an additively manufactured Zn-3Mg alloy. This novel alloy showcases refined grains and a distinctive microstructure, enabling the fabrication of functionally graded porous structures with mechanical properties resembling cortical bone. The achieved compressive yield strength and elastic modulus signify a critical leap toward mimicking the mechanical behavior of load-bearing bone. Moreover, our findings reveal tunable biodegradation rates and enhanced biocompatibility compared to pure Zn, emphasizing the potential clinical utility of Zn-based scaffolds for treating load-bearing bony defects. This breakthrough opens doors for the wider adoption of zinc-based materials in regenerative orthopedics.

Deep Learning Model Coupling Wearable Bioelectric and Mechanical Sensors for Refined Muscle Strength Assessment.

Muscle strength (MS) is related to our neural and muscle systems, essential for clinical diagnosis and rehabilitation evaluation. Although emerging wearable technology seems promising for MS assessment, problems still exist, including inaccuracy, spatiotemporal differences, and analyzing methods. In this study, we propose a wearable device consisting of myoelectric and strain sensors, synchronously acquiring surface electromyography and mechanical signals at the same spot during muscle activities, and then employ a deep learning model based on temporal convolutional network (TCN) + Transformer (Tcnformer), achieving accurate grading and prediction of MS. Moreover, by combining with deep clustering, named Tcnformer deep cluster (TDC), we further obtain a 25-level classification for MS assessment, refining the conventional 5 levels. Quantification and validation showcase a patient's postoperative recovery from level 3.2 to level 3.6 in the first few days after surgery. We anticipate that this system will importantly advance precise MS assessment, potentially improving relevant clinical diagnosis and rehabilitation outcomes.

Time trends in the burden of low back pain and its associated risk factors in China from 1990 to 2019.

Background: From 1990 to 2019, low back pain (LBP) was the leading cause of years lived with disability (YLDs) in China. However, the change patterns of LBP and its risk factors in China remain unclear. Methods: Data from the Global Burden of Disease Study 2019 were used. We used the join-point regression model and age-period-cohort analysis to evaluate the time trends of attributable risk factors on the burden of LBP. Results: In 2019, the risk factors included in this analysis accounted for 4.36 million YLDs of LBP, representing 42.2% of all YLDs of LBP in China, with 2.86 million due to occupational ergonomic factors, 1.74 million due to smoking, and 0.46 million due to high body mass index (BMI). The age-standardized YLD rates of LBP showed downward trends during 1990-2019, while there was a faster decline between 1990 and 1994. The curves of local drifts, which reflected the average annual percentage change across age groups, showed an increasing trend with age for high BMI and smoking, and a downward trend for occupational ergonomic factors. The YLD rates for LBP increased dramatically with age for high BMI, while it reached a peak at 40-60 years old for occupational ergonomic factors, and 65-80 years old for smoking. The period and cohort rate ratios of LBP YLD decreased in the past 3 decades for occupational ergonomic factors and smoking, while increased for high BMI. Conclusions: Our results provided strong evidence that there were diverse changing patterns for different risk factors, highlighting the need for risk-specific strategies. The translational potential of this article: China has the largest senior population and the fastest aging population in the world. Given that LBP typically occurs in the senior population, there would be an increasing LBP burden on China's health system. This suggests that effective strategies for LBP prevention should be strictly implemented in China, particularly in the senior population, which is of crucial translational potential.

Impact of pelvic anteversion on spinopelvic alignment in an asymptomatic population: a dynamic perspective of standing and sitting.

BACKGROUND CONTEXT: A subgroup of patients with pelvic anteversion can present with an unusually large degree of lumbar lordosis (LL), a highly sloped sacrum, and a relatively small pelvic incidence (PI). Prior to lumbar surgery, it can be important to consider such unique sagittal alignment. However, until now, there has been a lack of a predictive model considering different pelvic alignments. Furthermore, the dynamic characteristics of an anteverted pelvis (AP) subgroup have also been unclear. PURPOSE: To build linear predictive formulas for LL that take pelvic anteversion into consideration and to explore the dynamic characteristics of an AP subgroup. STUDY DESIGN: Monocentric, cross-sectional study. PATIENT SAMPLE: Five hundred and sixty-five asymptomatic Chinese men and women between the ages of 18 and 80 years. OUTCOME MEASURES: Sagittal parameters including LL, lumbar lordosis minus thoracic kyphosis (LL-TK), PI, pelvic tilt (PT), pelvic incidence minus lumbar lordosis (PI-LL), sacral slope (SS), sacral slope divided by pelvic incidence (SS/PI), sagittal vertical axis (SVA), thoracic kyphosis (TK), and T1 (first thoracic vertebra) pelvic angle (TPA) were measured on whole spine radiographs obtained with participants in standing and sitting positions. METHODS: All participants underwent radiography in the standing position; 235 of them underwent additional radiography in the sitting position to allow measurement of sagittal parameters. The participants with pelvic anteversion were placed in an AP (anteverted pelvis) group. Sagittal parameters were compared between the AP group and the non-AP group, and predictive formulas for LL based on PI were created in both groups. In addition, changes in sagittal parameters from standing to sitting were compared in the AP group and a PI-matched control group. RESULTS: Of the 565 participants, 171 (30.3%) had pelvic anteversion. In comparison with the non-AP group, the AP group presented with larger LL, a larger SS, and a smaller PT, with relatively small PI. The predictive formulas for LL were LL=0.60° × PI+21.60° (R2=0.268; p<.001) in the whole cohort, LL=0. 83×PI+18.75° (R2=0.427; p<.001) in AP group, and LL=0.79°×PI+9.66° (R2=0.451; p<.001) in the non-AP group. In moving from standing to sitting, the AP group presented with a larger decrease in SS and LL compared with the control group, indicating different patterns of spinopelvic motion. CONCLUSIONS: In the cohort examined, 30.3% present with pelvic anteversion. Those with AP present with unique characteristics of spinopelvic alignment. In moving from standing to sitting, they exhibit different patterns of spinopelvic motion. We found that identifying the degree of anteversion in each person improves the accuracy of linear models for predicting the degree of LL, which in turn can make plans for spine surgery more accurate.

Involvement of DJ-1 in the pathogenesis of intervertebral disc degeneration via hexokinase 2-mediated mitophagy.

Intervertebral disc degeneration (IDD) is an important pathological basis for degenerative spinal diseases and is involved in mitophagy dysfunction. However, the molecular mechanisms underlying mitophagy regulation in IDD remain unclear. This study aimed to clarify the role of DJ-1 in regulating mitophagy during IDD pathogenesis. Here, we showed that the mitochondrial localization of DJ-1 in nucleus pulposus cells (NPCs) first increased and then decreased in response to oxidative stress. Subsequently, loss- and gain-of-function experiments revealed that overexpression of DJ-1 in NPCs inhibited oxidative stress-induced mitochondrial dysfunction and mitochondria-dependent apoptosis, whereas knockdown of DJ-1 had the opposite effect. Mechanistically, mitochondrial translocation of DJ-1 promoted the recruitment of hexokinase 2 (HK2) to damaged mitochondria by activating Akt and subsequently Parkin-dependent mitophagy to inhibit oxidative stress-induced apoptosis in NPCs. However, silencing Parkin, reducing mitochondrial recruitment of HK2, or inhibiting Akt activation suppressed DJ-1-mediated mitophagy. Furthermore, overexpression of DJ-1 ameliorated IDD in rats through HK2-mediated mitophagy. Taken together, these findings indicate that DJ-1 promotes HK2-mediated mitophagy under oxidative stress conditions to inhibit mitochondria-dependent apoptosis in NPCs and could be a therapeutic target for IDD.

Factors associated with non-fusion after direct pars repair of lumbar spondylolysis with pedicle screw and lamina hook: a clinical and CT-assessed study.

BACKGROUND: Pedicle screw and lamina hook (PSLH) technique is an effective and popular method for direct pars repair of lumbar spondylolysis. There is a lack of studies to explore factors that may influence the healing of spondylolysis after direct pars repair surgery. The present study aimed to investigate the factors associated with non-fusion after direct pars repair of lumbar spondylolysis with PSLH technique. METHODS: A total of 55 subjects (average age 21.1 ± 6.3 years, a total of 120 pars defects) diagnosed with symptomatic spondylolysis and underwent pars repair surgery with PSLH were followed up and their clinical data were analyzed. Subjects were divided into a non-fusion group and fusion group according to whether the pars defect had bony fusion at last follow-up assessed by CT. Radiographic data, data related to spondylolysis and clinical outcomes were collected and compared between groups. RESULTS: The mean follow-up time of the 55 patients was 24.8 ± 12.0 (12-64) months. Among the 120 pars defects, 101 defects were successfully fused and 19 were not fused according to CT. The fusion rate was 84.2%. Multivariable logistic regression analysis showed the factors correlated with non-fusion after pars repair surgery: whether the spondylolysis segment was associated with spina bifida occulta (SBO) (P = 0.001), stage of the defect (P = 0.047), width of the defect (P = 0.002), and disc degeneration (P = 0.014). CONCLUSION: Direct pars repair by PSHL is a reliable treatment for lumbar spondylolysis with a fusion rate of 84.2%. Association with SBO of the spondylolysis segment, a terminal stage of the defect, a wider defect gap, and grade III disc degeneration may be factors associated with non-fusion after direct pars repair of lumbar spondylolysis with PLSH. Non-fusion patients after pars repair appear to have worse clinical results compared to fusion patients.

Imaging signs for preoperative diagnosis of dural ossification in patients with thoracic ossification of the ligamentum flavum: a blind, randomized diagnostic accuracy study.

Background: Dural ossification (DO) is the leading cause of surgery-related dural tear in patients with ossification of the ligamentum flavum (OLF). An accurate preoperative diagnosis of DO is conducive to the selection of appropriate surgical methods. Although several imaging signs, such as Banner cloud sign (BCs), tram-track sign (TTs), and comma sign (Cs) have been proposed for the preoperative diagnosis of DO, their diagnostic value has not been well studied. The aim of this study was to explore the diagnostic value of BCs, TTs, and Cs, and provide evidence-based data for their clinical application. Methods: This is a blind, randomized diagnostic study using retrospectively collected data from 102 consecutive patients who were diagnosed with OLF and underwent decompression surgery between January 2018 and June 2019. A total of 8 surgeons with different qualifications were recruited to read these imaging signs to identify the presence of DO. Surgical records were used as the reference standard. Sensitivity, specificity, and the area under the receiver operating characteristic (ROC) curve (AUC) were used to evaluate the diagnostic accuracy of each imaging sign and their different combinations. Results: Of the 102 patients, 21 were diagnosed with DO. BCs had a significantly higher diagnostic accuracy than TTs and Cs, with the AUC of 0.704, 0.607, and 0.593, respectively. The specificity of BCs, Cs, TTs, and their combination in diagnosing DO was 91.5%, 92.1%, 68.3%, and 62.2%, respectively. In the combined diagnostic test, the results showed that the combined diagnosis accuracy of BCs and Cs was the highest, and the AUC was 0.738. The combination of BCs, Cs, and TTs increased the sensitivity of diagnosing DO (77.5%), but did not improve the diagnostic accuracy, and the AUC was 0.699. Conclusions: BCs had higher diagnostic accuracy than TTs and Cs. BCs and Cs were highly specific for DO, whereas TTs could be confusing due to their non-specific presentations. The combination of BCs, TTs, and Cs improved the sensitivity of DO diagnosis, but not the specificity and accuracy.

How surface-to-volume ratio affects degradation of magnesium: in vitro and in vivo studies.

Despite the many studies carried out over the past decade to determine the biodegradation performance of magnesium and its alloys, few studies focused on the effect of altered surface area to volume ratio on in vitro and in vivo degradation rate and osteogenesis. Here, high purity magnesium cylindrical rods with gradient of surface area to volume ratio were processed by excavating different numbers of grooves on the side surface. The immersion test in SBF solution and the rat femoral condylar bone defect model were used to evaluate the degradation of magnesium rods in vitro and in vivo, respectively. We demonstrated that, the increased number of grooves on the HP magnesium surface represented a decrease in the percentage of residual volume over time, not necessarily an increase in absolute degradation volume or a regular change in corrosion rate. Furthermore, there were strong linear correlations between the relative degradation volume and the initial surface-to-volume ratio of HP magnesium rods both in vitro and in vivo. The difference in the slope of this relationship in vitro and in vivo might help to determine the possible range of in vivo degradation rates via in vitro data. In addition, the corrosion rate is more suitable for evaluating bone formation surrounding the different HP magnesium rods. Our findings in this work may facilitate adjusting the in vivo degradation and osteogenesis of different kinds of orthopedic implants made of the same magnesium-based material, and thus, accelerate the clinical popularization and application.

Distal Junctional Failures in Degenerative Thoracolumbar Hyperkyphosis.

OBJECTIVE: Degenerative thoracolumbar hyperkyphosis (DTH) is a disease that negatively affects individual health and requires surgical intervention, yet the ideal surgical approach and complications, especially distal junctional failures (DJF), remain poorly understood. This study aims to investigate DJF in DTH and to identify the risk factors for DJF so that we can improve surgical decision-making, and advance our knowledge in the field of spinal surgery to enhance patient outcomes. METHODS: This study retrospectively reviewed 78 cases (late osteoporotic vertebral compression fracture [OVCF], 51; Scheuermann's kyphosis [SK], 17; and degenerative disc diseases [DDD], 10) who underwent corrective surgery in our institute from 2008 to 2019. Clinical outcomes were assessed using health-related quality of life (HRQOL) measures, including the visual analogue scale (VAS) scores for back and leg pain, the Oswestry disability index (ODI), and the Japanese Orthopaedic Association (JOA) scoring system. Multiple radiographic parameters, such as global kyphosis (GK) and thoracolumbar kyphosis (TLK), were assessed to determine radiographic outcomes. Multivariate logistic regression analysis was employed to identify the risk factors associated with DJF. RESULTS: HRQOL improved, and GK, TLK decreased at the final follow-up, with a correction rate of 67.7% and 68.5%, respectively. DJF was found in 13 of 78 cases (16.7%), two cases had wedging in the disc (L3-4) below the instrumentation, one case had a fracture of the lowest instrumented vertebrae (LIV), one case had osteoporotic fracture below the fixation, nine cases had pull-out or loosening of the screws at the LIV and three cases (23.1%) required revision surgery. The DJF group had older age, lower computed tomography Hounsfield unit (CT HU), longer follow-up, more blood loss, greater preoperative sagittal vertical axis (SVA), and poorer postoperative JOA and VAS scores (back). The change in TLK level was larger in the non-DJF group. Post-sagittal stable vertebrae (SSV) moved cranially compared with pre-SSV. CONCLUSION: Age, CT HU, length of follow-up, estimated blood loss, and preoperative SVA were independent risk factors for DJF. We recommend fixation of the two vertebrae below the apex vertebrae for DTH to minimize surgical trauma.