RESUMO
Developing management strategies to safeguard public health and environmental sustainability requires a comprehensive understanding of the solubility and mobility of trace and alkaline metals in the event of seawater flooding. This study investigated the effects of seawater flooding, along the duration of flooding, on the release of trace and alkaline metals (Mn, Fe, Cu, Zn, Ca, K, and Mg) in two calcareous soils (Krome and Biscayne) located in southern Florida. Seawater flooding experiments involved two soil types and four flooding durations (1, 7, 14, and 28 days) replicated three times. Freshwater flooding experiments were also conducted for comparison. After each flooding experiment, soil samples were collected at three depths (15, 30, and 45 cm), and analyzed for selected elements. Comparative analysis revealed significant releases of Mn, Fe, and Zn in both soils flooded by seawater compared to freshwater. In most cases, significant increments were evident as early as 1-day exposure to seawater flooding, which further increased with flooding duration. However, the impacts of seawater flooding had notable differences between the two soils. Seawater flooding in Krome soil for 28 days, resulted in higher Mn, Fe, and Zn contents by 58, 340, and 510% compared with freshwater flooding, while corresponding increases in Biscayne soil were 3.3, 130, and 180%, respectively. Comparable marginal increases in Cu content were observed for both soils. Similarly, seawater flooding increased K, Mg, and Na contents from single-day flooding. The interplay between soil type, column depth, flooding duration, and their interactions proved influential factors in determining Mn, Fe, Cu, and Zn releases, with peak levels typically observed on the 28th day of flooding and at bottom depths. Overall, these findings highlight the release of these elements, raising concerns about potential plant toxicity and groundwater or surface water contamination due to leaching and runoff.
RESUMO
Minimizing the consumption of agrochemicals, particularly nitrogen, is the ultimate goal for achieving sustainable agricultural production with low cost and high economic and environmental returns. The use of biopolymers instead of petroleum-based synthetic polymers for CRFs can significantly improve the sustainability of crop production since biopolymers are biodegradable and not harmful to soil quality. Lignin is one of the most abundant biopolymers that naturally exist.In this study, controlled-release fertilizers were developed using a biobased nanocomposite of lignin and bentonite clay mineral as a coating material for urea to increase nitrogen use efficiency. Five types of controlled-release urea (CRU) were prepared using two ratios of modified bentonite as well as techniques. The efficiency of the five controlled-release nano-urea (CRU) fertilizers in improving the growth of tomato plants was studied under field conditions. The CRU was applied to the tomato plants at three N levels representing 100, 50, and 25% of the recommended dose of conventional urea. The results showed that all CRU treatments at the three N levels significantly enhanced plant growth parameters, including plant height, number of leaves, fresh weight, and dry weight, compared to the control. Additionally, most CRU fertilizers increased total yield and fruit characteristics (weight, length, and diameter) compared to the control. Additionally, marketable yield was improved by CRU fertilizers. Fruit firmness and acidity of CRU treatments at 25 and 50% N levels were much higher than both the 100% CRU treatment and the control. The vitamin C values of all CRU treatments were lower than the control. Nitrogen uptake efficiencies (NUpE) of CRU treatments were 47-88%, which is significantly higher than that of the control (33%). In conclusion, all CRU treatments at an N level of 25% of the recommended dose showed better plant growth, yield, and fruit quality of tomatoes than the conventional fertilizer.
RESUMO
Controlled- or slow-release urea can improve crop nitrogen use efficiencies and yields in many agricultural production systems. The effect of controlled-release urea on the relationships between levels of gene expression and yields has not been adequately researched. We conducted a 2 year field study with direct-seeded rice, which included treatments of controlled-release urea at four rates (120, 180, 240, and 360 kg N ha-1), a standard urea treatment (360 kg N ha-1), and a control treatment without applied nitrogen. Controlled-release urea improved the inorganic nitrogen concentrations of root-zone soil and water, functional enzyme activities, protein contents, grain yields, and nitrogen use efficiencies. Controlled-release urea also improved the gene expressions of nitrate reductase [NAD(P)H] (EC 1.7.1.2), glutamine synthetase (EC 6.3.1.2), and glutamate synthase (EC 1.4.1.14). With the exception of glutamate synthase activity, there were significant correlations among these indices. The results showed that controlled-release urea improved the content of inorganic nitrogen within the rice root zone. Compared with urea, the average enzyme activity of controlled-release urea increased by 50-200%, and the relative gene expression was increased by 3-4 times on average. The added soil nitrogen increased the level of gene expression, allowing enhanced synthesis of enzymes and proteins for nitrogen absorption and use. Hence, controlled-release urea improved the nitrogen use efficiency and the grain yield of rice. Controlled-release urea is an ideal nitrogen fertilizer showing great potential for improving rice production.
RESUMO
Herein, hydrogen (H·) radical was observed as a new pathway to produce hydroxyl (OH·) radicals that promoted cadmium sulfide (CdS) dissolution and thus Cd solubility in paddy soils. In soil incubation experiments, the bioavailable Cd concentrations in flooded paddy soils were increased by 8.44 % as the soil was aerated for 3d. For the first time, the H· radical was observed in aerated soil sludge. The association of CdS dissolution with free radicals was thereafter confirmed in an electrolysis experiment. Both H· and OH· radicals in electrolyzed water were confirmed by the electron paramagnetic resonance analysis. In the system with CdS, water electrolysis increased soluble Cd2+ concentration by 60.92 times, which was compromised by 43.2 % when the radical scavenger was introduced. This confirmed the free radicals can lead to oxidative dissolution of CdS. The H· radical was generated in systems with fulvic acid or catechol irradiated by ultraviolet lights, indicating soil organic carbon could be an important precursor for H· and OH· radicals. Biochar application decreased soil DTPA-Cd by 22-56 % invoking mechanisms besides adsorption. First, biochar quenched radicals and reduced CdS dissolution by 23.6 % in electrolyzed water in which -C-OH of biochar was oxidized to CO. Second, biochar boosted Fe/S-reducing bacteria and thus compromised CdS dissolution, as affirmed by a reversal correlation between soil available Fe2+ and DTPA-Cd concentrations. A similar phenomenon occurred in Shewanella oneidensis MR-1-inoculated soils. This study provided new insights into the bioavailability of Cd and offered feasible measures to remediate Cd-contaminated paddy soils with biochars.
Assuntos
Oryza , Poluentes do Solo , Cádmio/análise , Disponibilidade Biológica , Carbono/metabolismo , Solo , Poluentes do Solo/análise , Carvão Vegetal/metabolismo , Água/análise , Ácido Pentético/metabolismo , Oryza/metabolismoRESUMO
Bio-based controlled release fertilizers (BCRFs) are cost-effective and renewable thus gradually replacing petroleum-based controlled release fertilizers (CRFs). However, most of the study mainly focused on modifying BCRFs to improve controlled-release performance. It is necessary to further increase the functionality of BCRF for expanding the application. A multifunctional double layered bio-based CRF (DCRF) was prepared. Urea was used as the core of fertilizer, bio-based polyurethane was used as the inner coating, and sodium alginate and copper ions formed the hydrogel as the outer coating. In addition, mesoporous silica nanoparticles loaded with sodium selenate was used to modify the sodium alginate hydrogel (MSN@Se hydrogel). The results showed that the nitrogen longevity of the DCRF was much better than that of urea and BCRF. The selenium nutrient longevity of the DCRF was 40 h, much longer than that of sodium selenate. The DCRF improved the yield and nutritive value of cherry radish (Raphanus sativus L. var.radculus pers) with the elevated contents of selenium, an essential trace element. Moreover, the DCRF showed inhibitory effect on Fusarium oxysporum Schltdl. and could resist soil-borne fungal diseases continuously. Overall, this multifunctional fertilizer has great potential for expanding the use of BCRFs for sustainable development of agriculture.
Assuntos
Raphanus , Selênio , Poliuretanos , Fertilizantes/análise , Preparações de Ação Retardada , Antifúngicos , Ácido Selênico , Solo , Nitrogênio/análise , UreiaRESUMO
The accumulation of cadmium (Cd) in grains and edible parts of crops poses a risk to human health. Because rice is the staple food of more than half of the world population, reducing Cd uptake by rice is critical for food safety. HydroPotash (HYP), an innovative potassium fertilizer produced with a hydrothermal process, has the characteristics of immobilizing heavy metals and potential use for remediating Cd-contaminated soils. The objective of this study was to evaluate the HYP as a soil amendment to immobilize Cd in acidic soils and to reduce the accumulation of Cd in rice tissues. The experiment was performed in a greenhouse with a Cecil sandy loam soil (pH 5.3 and spiked with 3 mg Cd kg-1) under either flooding conditions (water level at 4 cm above the soil surface) or at field capacity. Two hydrothermal materials (HYP-1 and HYP-2) were compared with K-feldspar + Ca(OH)2 (the raw material used for producing HYP), Ca(OH)2, zeolite, and a control (without amendment). After 30 days of soil incubation, HydroPotashs, the raw material, and Ca(OH)2 increased both soil solution pH and electrical conductivity. These materials also decreased soluble Cd concentration (up to 99.7%) compared with the control (p < 0.05). After 145 days, regardless of the materials applied, plant growth was favored (up to 35.8%) under the flooded regime. HydroPotash-1 was more effective for increasing dry biomass compared with other amendments under both water regimes. HydroPotashs reduced extractable Cd in soil, Cd content in plant biomass at tillering and maturing stage, and were efficient in minimizing Cd accumulation in rice grains.
Assuntos
Metais Pesados , Oryza , Poluentes do Solo , Zeolitas , Silicatos de Alumínio , Cádmio/análise , Fertilizantes , Humanos , Oryza/química , Potássio/farmacologia , Compostos de Potássio , Solo/química , Poluentes do Solo/análise , Água , Zeolitas/farmacologiaRESUMO
Salinity affects over 33% of irrigated farmland globally. Developing a low-cost, safe, and effective material as a soil salinity mitigation option would be of significant importance. This study proposed to synthesize a hydrogel using liquefied biomass from sugarcane bagasse, polyvinyl alcohol, and sodium tetraborate decahydrate. The effectiveness of the produced hydrogel in mitigating soil salinity was evaluated based on an incubation experiment at two salinity levels (5 and 10 dS m-1). The experiment was conducted by mixing liquefied hydrogel with soil at four application rates (0, 1, 2, and 3% w/w) with three replications. Porewater and soil samples were tested for pH and electrical conductivity (EC). Soil samples were also analyzed for selected cations and anions. The results demonstrated that hydrogel significantly reduced porewater EC at both 5 and 10 dS m-1 salt solutions. In addition, hydrogel reduced Cl-, P, Ca2+, and Al3+ concentrations in soil samples with maximum reductions observed from 3% hydrogel treatment. However, pH of porewater showed a consistent increase with hydrogel application. The application of hydrogel also increased NH4-N at high salt level. Overall, hydrogel has shown promising results in reducing soil salinity and could potentially be used as a soil amendment for saline soils.
Assuntos
Saccharum , Solo , Salinidade , Celulose , Biomassa , Hidrogéis , Álcool de Polivinil , Cloreto de Sódio , CátionsRESUMO
Novel green technologies for soil remediation have been focusing on altering soil properties and improving soil health. Hydrothermally-altered feldspar (HYP, HydroPotash), recently developed, is being related as both an efficient amendment to immobilize heavy metals in soils and a plant nutrients source, consisting in a promising technology for revegetation of contaminated sites. In order to evaluate the effectiveness of using HYP for phytostabilization programs, two different soils (Technosol and Oxisol) collected from a smelting site were amended with increasing doses of HYPs (HYP-1 and HYP-2): 15, 30, 60, and 120 Mg ha-1. For comparison, a control (soil without amendment) and a soil amended with zeolite (clinoptilolite) were also included as treatments. After 90 days of incubation, HYPs decreased up to 83.8 % of Cd availability and reduced exchangeable Al up to 100 %. HydroPotash increased pH, cation exchange capacity, and contents of potassium, calcium, and phosphorus, as well as microbial biomass carbon, and fluorescein diacetate hydrolysis of soils. Andropogon gayanus, Eucalyptus grandis, and Heterocondylus vitalbae started growing from the dose of 15 Mg ha-1 HYPs in the Oxisol and 60 Mg ha-1 HYPs in the Technosol. Principal component analysis indicates that plant shoot dry weight was negatively correlated with extractable Cd and Zn and positively with pH, CEC, and Ca content. Besides promoting plant growth, HYPs reduced heavy metals (Cd and Zn) absorption by plants, indicating that HYP has potential use as an amendment in phytostabilization programs.
Assuntos
Metais Pesados , Poluentes do Solo , Silicatos de Alumínio , Metais Pesados/análise , Metais Pesados/toxicidade , Compostos de Potássio , Solo , Poluentes do Solo/análise , Poluentes do Solo/toxicidadeRESUMO
Hydrothermally-altered feldspar (HydroPotash, HYP) possesses, among other physicochemical properties, high pH buffering and cation exchange capacity. Therefore, it may potentially remove heavy metals from aqueous solutions and immobilize these metals in contaminated soil. This study aimed to evaluate the capabilities of two types of HydroPotash (HYP-1 and HYP-2) and a zeolite sample (a commercial adsorbent) for immobilizing cadmium (Cd), zinc (Zn), and lead (Pb) from both aqueous solution and contaminated soils from a Zn-smelting area (classified as soilhigh, soilintermediate, and soillow based on their level of soluble metal concentration). Sorption studies in natural suspension pH showed that HYPs removed 63.8-99.9% Zn, 20.6-40.7% Cd, and 68.4-99.7% Pb from aqueous solution. In the batch test with controlled pH (at pH 5.5), HYPs sorbed more Cd than zeolite. Analyses of scanning electron microscopy-energy dispersive X-ray spectroscopy after desorption showed the presence of Pb at HYP-2, indicating that this metal was effectively adsorbed. In soilhigh HYPs immobilized 99.9% of Zn, Cd, and Pb after one week of soil incubation with these products. The HYPs immobilization effect persisted up to 84 days of soil incubation with these products. The increased soil pH promoted by HYPs appears to be the main factor controlling metal sorption. In conclusion, HydroPotash can be used as an adsorbent/amendment to effectively immobilize heavy metals in both water and contaminated soils by precipitation and adsorption. Our findings indicate the high potential of this material for Cd, Zn, and Pb stabilization, which is of great relevance when recovering areas affected by mining/smelting activities with multi-element contamination.
Assuntos
Metais Pesados , Poluentes do Solo , Silicatos de Alumínio , Cádmio/análise , Metais Pesados/análise , Compostos de Potássio , Solo , Poluentes do Solo/análise , TecnologiaRESUMO
The combination of mineral multi-elements with chemometrics can effectively trace the geographical origin of tea (Camellia sinensis). However, the role of soil mineral multi-elements in discriminating the origin of tea was unknown. This study aimed to further validate whether the geographical origin of tea can be authenticated based on mineral multi-elements, the concentrations of which in tea leaves were significantly correlated with those in soil. Eighty-seven tea leaves samples and paired soils from Meitan and Fenggang (MTFG), Anshun, and Leishan in China were sampled, and 24 mineral elements were measured. The data were processed using one-way analysis of variance (ANOVA), Pearson correlation analysis, principal component analysis (PCA), and stepwise linear discriminant analysis (SLDA). Results indicated that tea and soil samples from different origins differed significantly (p < 0.05) in terms of most mineral multi-elemental concentrations. Conversely, the intra-regional differences of different cultivars of the same origin were relatively minor. Seventeen mineral elements in tea leaves were significantly correlated with those in soils. The SLDA model, based on the 17 aforementioned elements, produced a 98.85% accurate classification rate. In addition, the origin was also identified satisfactorily with 94.25% accuracy when considering the cultivar effect. In conclusion, the tea plant cultivars unaffected the accuracy of the discrimination rate. The geographical origin of tea could be authenticated based on the mineral multi-elements with significant correlation between tea leaves and soils. Soil mineral multi-elements played an important role in identifying the geographical origin of tea.
Assuntos
Camellia sinensis , China , Análise Discriminante , Minerais/análise , Folhas de Planta/química , Solo , CháRESUMO
Pulping and paper industries using non-woody feedstocks face the challenge of its notorious waste disposal problem. To resolve this problem, in this study, we evaluated a variety of properties of solid residues reclaimed from the effluents of both wheat straw ammonium sulfate and Kraft pulping processes as organic fertilizers. The results show that both residues from the ammonium sulfate (RAS) and Kraft pulping (RKP) processes possess desirable C/N ratios, appropriate nutritional compositions, and low levels of harmful heavy metals. The high solubilities (>35 g/L) of both residues allow their use for fertigation or foliar applications. The salt index (30-50) is within the range of commercial chemical fertilizers such as potassium sulfate (42.6) and magnum sulfate (44). The E3/E5 ratios of residues suggest that the residues have small molecular sizes, which are similar to fulvic acids. Overall, wheat straw pulping residues demonstrate the potential as the sustainable organic fertilizers and the beneficial soil amendments. This work has the potential to resolve the severer effluent disposal problem faced by the non-woody pulping and papermaking industries, open a door to effectively utilize residues as value-added byproducts, and lead to both environmental sustainability and economic benefits.
Assuntos
Fertilizantes , Poluentes do Solo/análise , Monitoramento Ambiental , Metais Pesados , Eliminação de Resíduos/métodos , Solo/química , TriticumRESUMO
Although solid-phase activation of lignite using a nanocatalyst has great potential in producing low-cost and sustainable humic acid, the large-scale application of this technology still faces challenges because of the high price and toxicity of the nanocatalyst. Additionally, the specific molecular components of humic acid in activated lignite remain unknown. In this work, a multifunctional molybdate-phosphorus hierarchical hollow nanosphere (Mo-P-HH) catalyst was successfully manufactured by a simple way followed by phosphorization. In comparison with a commercial Pd/C catalyst, the multifunctional Mo-P-HH catalyst was more effective in producing water-soluble humic acid with small molecular functional groups from lignite via solid-phase activation. Moreover, Fourier transform ion cyclotron resonance mass spectrometry revealed the molecular compositions of humic acid in activated lignite. Compared with that from raw lignite, the humic acid after Mo-P-HH activation had less aromatic structure but higher content of lipids, proteins, amino sugar, and carbohydrates. In addition, the activated humic acid simulated seed germination and seedling growth. Therefore, this study provided a high-performance hierarchical hollow nanocatalyst for activation of humic acid and also offered the theoretical basis for the application of humic acid in agriculture.
Assuntos
Nanosferas , Oryza , Carvão Mineral , Germinação , Substâncias Húmicas/análise , Molibdênio , Fósforo , Sementes/químicaRESUMO
Despite the numerous benefits of biosolids, concerns over nutrient losses restrict the extent to which biosolids can be beneficially reused. We evaluated the effectiveness of biochar in controlling the lability of nutrients in agricultural land. This study was designed to investigate the potential impacts of co-applying biochar with biosolids or inorganic fertilizer on N and P leaching losses. A companion paper focuses on greenhouse gas responses. Nutrients were surface applied as biosolids (aerobically digested Class B) and inorganic fertilizer (ammonium nitrate and triple superphosphate) to an established perennial pasture at equivalent annual rates typical of field practices. Biochar was applied at an annual rate of 20 Mg ha-1 . Leachate N and P were monitored using passive-capillary drainage lysimeters. Results demonstrated significant temporal variability in leachate N and P, with larger pulses generally occurring during periods of high water table levels or after intensive rainfall. Inorganic fertilizer generally resulted in greater leachate N and P losses than biosolids. No differences in leachate N and P losses between biosolids and control were observed. Approximately 1% of applied N was lost via leaching from biosolids treatments vs. 16% for inorganic fertilizer. Regardless of the P source, negligible (0.1-0.2% of applied P), cumulative P leaching occurred during the 3-yr study. Biochar had no effect on P leaching but reduced N leaching from treatments receiving inorganic fertilizer by 60%. Prudent nutrient management is possible even on biosolids-amended Spodosols with high water tables.
Assuntos
Nitrogênio , Fósforo , Carvão Vegetal , Pradaria , Nutrientes , SoloRESUMO
Land application of biochar reportedly provides many benefits, including reduced risk of nutrient transport, greenhouse gas (GHG) emission mitigation, and increased soil C storage, but additional field validation is needed. We evaluated the effectiveness of biochar in controlling the lability of nutrients in agricultural land. This study was designed to evaluate the impacts of biochar co-applied with various N and P sources on GHG fluxes from a subtropical grassland. Nutrients (inorganic fertilizer and aerobically digested Class B biosolids) were surface applied at a rate of 160 kg plant available N ha-1 yr-1 with or without biochar (applied at 20 Mg ha-1 ). Greenhouse gas (CO2 , CH4 , and N2 O) fluxes were assessed using static chambers and varied significantly, both temporally and with treatments. Greenhouse gas fluxes ranged from 1,247 to 23,160, -0.7 to 42, and -1.4 to 376 mg m-2 d-1 for CO2 , N2 O, and CH4 , respectively. Results of the 3-yr field study demonstrated strong seasonal variability associated with GHG emissions. Nutrient source had no effect on soil CO2 and CH4 emissions, but annual and cumulative (3-yr) N2 O emissions increased with biosolids (8 kg N2 O ha-1 yr-1 ) compared with inorganic fertilizer (5 kg N2 O ha-1 yr-1 ) application. Data suggested that environmental conditions played a more important role on GHG fluxes than nutrient additions. Biochar reduced CO2 emissions modestly (<9%) but had no effects on N2 O and CH4 emissions.
Assuntos
Gases de Efeito Estufa , Dióxido de Carbono/análise , Carvão Vegetal , Pradaria , Metano/análise , Óxido Nitroso/análise , Nutrientes , SoloRESUMO
Using accumulators for intercropping in agricultural production can change the heavy metal concentration in the target plants. This study aims to investigate how intercropping wheat (Triticum aestivum L.) and Solanum nigrum L. affects soil bacterial community and cadmium (Cd) absorption in response to Cd-contaminated soil. We compared the concentrations and accumulations of Cd by plants, the activities of soil enzymes and the bacterial community structures of rhizosphere soil in monoculture and intercropping system. Principal component analysis (PCA) ordinations showed that soil bacterial communities were significantly separated by MW and IW, which illustrated intercropping with Solanum nigrum L. impacted the bacterial community structure of wheat. Firstly, the results showed that the biomass of shoots and roots in intercropped wheat (IW) were significantly decreased by 16.19% and 29.38% compared with monoculture wheat (MW) after 60 days after transplanting (DAT). Secondly, the Cd concentration and accumulation of shoots in IW was higher than MW. The Cd accumulation of IW shoots and roots were increased 12.87% and 0.98%, respectively after 60 days DAT. Besides, the enzymes activity [catalase (CAT), urease (UA) and alkaline phosphatase (ALP)] of IW were decreased 35%, 6% and 21%, respectively after 60 days DAT. Finally, the diversity indexes [Abundance-based Coverage Estimator (ACE), Chao and InvSimpson] of IW were lower than MW. These results indicated that intercropping with Solanum nigrum L. inhibited the wheat growth and decreased the bacterial community diversity in wheat rhizosphere, increased the Cd concentration and accumulation in plant tissues of wheat. Therefore, intercropping Solanum nigrum L. and wheat with Cd-contaminated soil might increase the risk of excessive Cd in wheat.
Assuntos
Cádmio/análise , Produção Agrícola/métodos , Poluentes do Solo/análise , Solanum nigrum/crescimento & desenvolvimento , Triticum/crescimento & desenvolvimento , Bioacumulação , Biodegradação Ambiental , Biomassa , Cádmio/metabolismo , Raízes de Plantas/crescimento & desenvolvimento , Raízes de Plantas/metabolismo , Rizosfera , Solo/química , Poluentes do Solo/metabolismo , Solanum nigrum/metabolismo , Triticum/metabolismoRESUMO
A novel, eco-friendly, water-soluble, slow-release nitrogen fertilizer was developed to enhance water solubility and nitrogen use efficiency. A test was performed to determine the interactive effects of process parameters using a central composite design and response surface methodology. The quadratic polynomial mode for slow-release nitrogen was determined and yielded differences (p < 0.01). The soluble, slow-release nitrogen fertilizers were analyzed using nuclear magnetic resonance, and the release characteristics of soil nitrogen from the fertilizer at 25 °C were also determined. The effects of the fertilizer on plant growth were determined using rape (Brassica campestris L.) outdoors. Conversion rates from the fertilizer to inorganic nitrogen were 30.0, 52.2, and 60.0% at 7, 24, and 40 days, respectively. This soluble, slow-release nitrogen fertilizer resulted in increased yields and nitrogen use efficiencies in rape plants compared with a standard urea fertilizer. The yields of rape plants treated with a mixture of the fertilizer and urea (BBW100%) were significantly higher than all of the other treatments. When the nitrogen application rate was reduced by 20%, the resulting "SSNF80%" and "BBW80%" treatments produced nearly the same yields as "UREA100%". Nitrogen use efficiencies for treatments with the study fertilizer ("SSNF") and the mixture bulk blend fertilizer ("BBW") were significantly higher than that with urea ("UREA") treatment by 37-52 and 42-43%, respectively. Hence, the fertilizer showed great potential for improving the production of rape and possibly other crops.
RESUMO
Self-healing materials have received increased attention because of their automatic detecting and repairing damage function. In this paper, a novel self-assembly and self-healing bionanocomposite was developed as a coating material for controlled release fertilizers. This nanotechnology-enabled coating is environmentally friendly and highly efficient and possesses a tunable nutrient-releasing characteristic. In the synthesis process, bio-based polyurethane coated urea (BPCU) was prepared by the reaction of bio-polyols with isocyanate. The BPCU was then modified by the layer-by-layer technology to prepare self-assembling modified BPCU (SBPCU). Last, hollow nano-silica (HNS) particles loaded with the sodium alginate (SA) were used to modify SBPCU to fabricate of self-assembling and self-healing BPCU (SSBPCU). The results show that the self-assembled materials were synthesized through electrostatic adsorption. The self-healing was observed through scanning electron microscopy and 3D-X-ray computed tomography, revealing the mechanism was that the repair agent released from HNS reacted with the curing agent to block the pore channels and cracks of the coating. As a result, the SSBPCU exhibited the highest hydrophobicity and surface roughness and thus the slowest release rate. For the first time, this work has designed a novel strategy to solve the bottleneck problem that restricts the development of a controlled-release fertilizer.
RESUMO
In this work, electron transfer (ET) moiety of PC was ascertained in chromate (Cr(â ¥)) reduction by zero-valent iron supported by pyrogenic carbon (PC) (ZVI/PC) prepared by pyrolysis of hematite (α-Fe2O3)-treated pinewood. X-ray diffraction analysis suggested successive phase transformation of α-Fe2O3âmagnetite (Fe3O4)âwustite (FeO)âZVI (Feo). Raman spectra and Brunauer-Emmett-Teller analysis revealed that ZVI/PC is characterized with more ordered graphitic carbon and greater surface area than pristine PC. Maximal Cr(â ¥) removal capacity (pHâ¯=â¯3) as predicted by Langmuir isotherm model were 5.78, 36.12 and 8.39â¯g kg-1 for PC, ZVI/PC and ZVI, respectively. ZVI/PC maintained significantly greater Cr(â ¥) removal capacity than ZVI and PC at pH 3-9, but Cr(â ¥) removal dropped rapidly to 6.78â¯g kg-1 at pH 4 and above. X-ray photoelectron spectroscopy and successive desorption of Cr-laden ZVI/PC and ZVI showed trivalent Cr was the dominant species, suggesting reduction was an important mechanism for Cr(â ¥) detoxification. Electrochemical analysis demonstrated that ZVI/PC exhibited greater Tafel corrosion rate and ET quantity, with lower electrical resistance. Besides, Cr(â ¥) reduction showed reversal trend with electrical resistance of ZVI/PC. To conclude, ET capacity was closely associated with electrical conductivity of ZVI/PC due to intensified conductive graphitic carbon structure of PC at higher pyrogenic temperatures.
RESUMO
Risk assessment regarding heavy metals in tea is crucial to ensure the health of tea customers. However, the effects of geological difference on distribution of heavy metals in soils and their accumulation in tea leaves remain unclear. This study aimed to estimate the impacts of geological difference on distribution of cadmium (Cd), lead (Pb), thallium (Tl), mercury (Hg), arsenic (As), antimony (Sb), chromium (Cr), nickel (Ni), and manganese (Mn) in soils and their accumulation in tea leaves, and further evaluate their health risks. 22 soils and corresponding young tea leaves (YTL) and old tea leaves (OTL), from geologically different plantations, were sampled and analyzed. Results showed that heavy metals concentrations in soils, derived from Permian limestone and Cambrian weakly mineralized dolomite, were obviously greater than those from Silurian clastic rock. The geological difference controlled the distribution of soil heavy metals to a large extent. Contents of Cd, Tl, and Mn in tea leaves mainly depended on their contents in soils. Soil Hg, Pb, As, and Sb contents may not be the only influencing factors for their respective accumulation in tea leaves. More attentions should be paid to soil acidification of tea plantations to ensure the tea quality security. Target hazard quotients (THQ) of Cd, Pb, Tl, Hg, As, Sb, Cr, and Ni and hazard index (HI) via tea intake were below one, indicating no human health risk. The non-mineralized Silurian area was less at risk of heavy metals accumulation in tea leaves than the Cambrian metallogenic belt and the Permian Cd-enriched zone. This study could provide an important basis to understand and mitigate the potential risks of heavy metals in tea.
Assuntos
Metais Pesados/análise , Poluentes do Solo/análise , Chá/química , Antimônio/análise , Arsênio/análise , Cádmio/análise , China , Cromo/análise , Monitoramento Ambiental , Fenômenos Geológicos , Humanos , Chumbo/análise , Manganês/análise , Mercúrio/análise , Níquel/análise , Folhas de Planta/química , Medição de Risco , Solo/química , Tálio/análiseRESUMO
BACKGROUND: The geographical origin of tea (Camellia sinensis) can be traced using mineral elements in its leaves as fingerprints. However, the role that could be played by soil mineral elements in the geographical authentication of tea leaves has been unclear. In this study, 22 mineral elements in 73 pairs of tea leaves and soils from three regions (Pu'an, Duyun, and Liping) in Guizhou, China, were determined using inductively coupled plasma mass spectrometry (ICP-MS) and inductively coupled plasma atomic emission spectrometry (ICP-AES). The mineral element concentrations were processed by multivariate statistical analysis, including one-way analysis of variance (ANOVA), correlation analysis, principal component analysis (PCA), and stepwise linear discriminant analysis (S-LDA). RESULTS: Based on a one-way ANOVA, tea leaves and soils with different origins possessed unique mineral element fingerprints. Sixteen mineral element concentrations in tea leaves were significantly correlated with those in soils (P < 0.05). The geographical origins of tea leaves were effectively differentiated using the 16 correlated mineral elements combined with PCA. The S-LDA model offered a 100% differentiation rate, and six indicative elements (phosphorus, Sr, U, Pb, Cd, and Cr) were selected as important fingerprinting markers for the geographic traceability of tea leaves. The accurate discrimination rate of geographical origin was unaffected by the cultivars of tea in the S-LDA model. CONCLUSIONS: Mineral elements in soils played an important role in the geographical authentication of tea leaves. Mineral elemental concentrations with significant correlations between tea leaves and soils could be robust, and could be used to trace the geographical origins of tea leaves. © 2020 Society of Chemical Industry.