Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 2 de 2
Filtrar
Mais filtros










Base de dados
Intervalo de ano de publicação
1.
ACS Appl Mater Interfaces ; 15(25): 30486-30494, 2023 Jun 28.
Artigo em Inglês | MEDLINE | ID: mdl-37315104

RESUMO

Flexible tactile sensors with high sensitivity, a broad pressure detection range, and high resolution are highly desired for the applications of health monitoring, robots, and the human-machine interface. However, it is still challenging to realize a tactile sensor with high sensitivity and resolution over a wide detection range. Herein, to solve the abovementioned problem, we demonstrate a universal route to develop a highly sensitive tactile sensor with high resolution and a wide pressure range. The tactile sensor is composed of two layers of microstructured flexible electrodes with high modulus and conductive cotton fabric with low modulus. By optimizing the sensing films, the fabricated tactile sensor shows a high sensitivity of 8.9 × 104 kPa-1 from 2 Pa to 250 kPa because of the high structural compressibility and stress adaptation of the multilayered composite films. Meanwhile, a fast response speed of 18 ms, an ultrahigh resolution of 100 Pa over 100 kPa, and excellent durability over 20 000 loading/unloading cycles are demonstrated. Moreover, a 6 × 6 tactile sensor array is fabricated and shows promising potential application in electronic skin (e-skin). Therefore, employing multilayered composite films for tactile sensors is a novel strategy to achieve high-performance tactile perception in real-time health monitoring and artificial intelligence.

2.
J Colloid Interface Sci ; 630(Pt A): 23-33, 2023 Jan 15.
Artigo em Inglês | MEDLINE | ID: mdl-36215821

RESUMO

Adhesion between flexible devices and skin surface facilitates portability of devices and reliable signal acquisition from human body, which is essential for medical therapy devices or monitoring systems. Here, we utilize a simple, cost-effective, and scalable layer-by-layer dip-coating method to fabricate a skin-adhesive multifunctional textile-based device, consisting of three parts: low-cost and easily available airlaid paper (AP) substrate, conductive MXene sensitive layer, and adhesive polydimethylsiloxane (PDMS). The adhesive layer of lightly cross-linked PDMS enables the device to form conformal contact with skin even during human joint bending. The smart textile device exhibits excellent electro-thermal and photo-thermal conversion performance with good cycling stability and tunability. Furthermore, the textile electronics show good electromagnetic interference (EMI) shielding properties due to the good electrical conductivity, as well as sensitive and stable pressure sensing properties for human motion detection. Consequently, this efficient strategy provides a possible way to design multifunctional and wearable electronic textiles for medical applications.


Assuntos
Dispositivos Eletrônicos Vestíveis , Humanos , Adesivos , Calefação , Têxteis , Eletrônica , Condutividade Elétrica
SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA
...