Responsiveness of voltage-gated calcium channels in SH-SY5Y human neuroblastoma cells on quasi-three-dimensional micropatterns formed with poly (l-lactic acid).

INTRODUCTION: In this study, quasi-three-dimensional (3D) microwell patterns were fabricated with poly (l-lactic acid) for the development of cell-based assays, targeting voltage-gated calcium channels (VGCCs). METHODS AND MATERIALS: SH-SY5Y human neuroblastoma cells were interfaced with the microwell patterns and found to grow as two dimensional (2D), 3D, and near two dimensional (N2D), categorized on the basis of the cells' location in the pattern. The capability of the microwell patterns to support 3D cell growth was evaluated in terms of the percentage of the cells in each growth category. Cell spreading was analyzed in terms of projection areas under light microscopy. SH-SY5Y cells' VGCC responsiveness was evaluated with confocal microscopy and a calcium fluorescent indicator, Calcium Green™-1. The expression of L-type calcium channels was evaluated using immunofluorescence staining with DM-BODIPY. RESULTS: It was found that cells within the microwells, either N2D or 3D, showed more rounded shapes and less projection areas than 2D cells on flat poly (l-lactic acid) substrates. Also, cells in microwells showed a significantly lower VGCC responsiveness than cells on flat substrates, in terms of both response magnitudes and percentages of responsive cells, upon depolarization with 50 mM K(+). This lower VGCC responsiveness could not be explained by the difference in L-type calcium channel expression. For the two patterns addressed in this study, N2D cells consistently exhibited an intermediate value of either projection areas or VGCC responsiveness between those for 2D and 3D cells, suggesting a correlative relation between cell morphology and VGCC responsiveness. CONCLUSION: These results suggest that the pattern structure and therefore the cell growth characteristics were critical factors in determining cell VGCC responsiveness and thus provide an approach for engineering cell functionality in cell-based assay systems and tissue engineering scaffolds.

Microfluidic pool structure for cell docking and rapid mixing.

A microfluidic pool structure for cell docking and rapid mixing is described. The pool structure is defined as a microchamber on one structural layer of a bilayer chip and connects with two or more individual microchannels on the other structural layer. In contrast to the turbulent flow in a macroscale pool, laminar streams enter and exit this microfluidic pool structure with definite and controllable direction that may be influenced by the location and geometry of the pool. A simple microfluidic model was used to validate this hypothesis. In this model, a microscale pool structure was made on the lower layer of a chip and connected with three parallel microchannels in the upper layer. Simulation and experimental results indicated that the flow profile within the pool structure was determined by its geometry and location. This could be used as a flow control method and it was simpler than designs based on microvalve, hydraulic pressure, or electrokinetic force, and has some important applications. For example, controllable streams within this structure were used to immobilize biological cells along the microchannel walls. When different solution streams flowed through the pool, rapid diffusion of analytes occurred for short diffusion distance between vertical flow laminas. Furthermore, desired dilution (mixing) ratio could be obtained by controlling the geometry of the microfluidic pool.

[Development of the chip system for measurement of red blood cell rheology].

We have developed a novel silicon microchannel system for the research of the red blood cell rheology and deformation. Recurring to many kinds of information technologies and advanced test means such as the electronic microscope, the image acquisition system and the computer processing system and by using the up-to-date Micro Electro Mechanical System (MEMS) technology, a new measuring system of red bood cell deformation is designed based on the chip and a model using the silicon microchannel to simulate capillary vessel network. It provides a real-time collection and anaysis of data which include image, speed, flow parameter, and so on. It provides printing, storage of the analysis results and patients' database management.