A Simple and Efficient Method for Synthesis and Extraction of Ethyl Ferulate from γ-Oryzanol.

Ethyl ferulate (EF) is a ferulic acid (FA) derivative with high commercial value. It is not found naturally and is mostly synthesized from FA via esterification with ethanol. The present work aimed to synthesize the EF from γ-oryzanol, a natural antioxidant from rice bran oil via acid-catalyzed transethylation at refluxing temperature of ethanol. The reaction was optimized by central composite design (CCD) under response surface methodology. Based on the CCD, the optimum condition for the synthesis of EF from 0.50 g of γ-oryzanol was as follows: γ-oryzanol to ethanol ratio of 0.50:2 (g/mL), 12.30% (v/v) H2SO4, and a reaction time of 9.37 h; these conditions correspond to a maximum EF yield of 87.11%. Moreover, the optimized transethylation condition was further validated using 12.50 g of γ-oryzanol. At the end of the reaction time, distilled water was added as antisolvent to selectively crystallize the co-products, phytosterol and unreacted γ-oryzanol, by adjusting the ethanol concentration to 49.95% (v/v). The recovery yield of 83.60% with a purity of 98% of EF was achieved. In addition, the DPPH and ABTS assays showed similar antioxidant activities between the prepared and commercial EF.

Recovery of γ-Oryzanol from Rice Bran Acid Oil by an Acid-base Extraction Method with the Assistance of Response Surface Methodology.

A rapid and low energy consumption method for the recovery of γ-oryzanol from rice bran acid oil (RBAO), a byproduct of rice bran oil (RBO) refining, is presented. The RBAO was converted to the fatty acid ethyl ester (FAEE) and was used as the starting material. The dissolved γ-oryzanol was separated from the FAEE using an acid-base extraction method with alkaline aqueous ethanol and hexane as extraction media. A systematic investigation of the extraction yield was carried out by applying response surface methodology (RSM) based on central composite design (CCD) and Derringer's desirability function. The concentration of NaOH, the percentage of ethanol in water, the hexane content and their interactions showed significant effects on the yield of γ-oryzanol and FAEE. The optimal extraction conditions were as follows: extraction time of 1 min at room temperature (28-32°C); extraction medium: 1.855 M NaOH; 75.91% ethanol in water and 20.59% hexane in the total volume of the extractant; and FAEE to extractant ratio of 1:10 corresponding to a maximum γ-oryzanol yield of 75.82±3.44% and the desired FAEE yield of 54.42±7.80%. The γ-oryzanol-rich fraction was further purified by washing with a 2% Na2CO3 solution, obtaining 69.94% recovery yield with 89.90% purity of γ-oryzanol. The purified γ-oryzanol showed good scavenging activity on the 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical and the ABTS radical and was comparable to the commercial product, clearly suggesting that the presented process was efficient and feasible.

Ferulic Acid Supplementation Improves Lipid Profiles, Oxidative Stress, and Inflammatory Status in Hyperlipidemic Subjects: A Randomized, Double-Blind, Placebo-Controlled Clinical Trial.

Ferulic acid is the most abundant phenolic compound found in vegetables and cereal grains. In vitro and animal studies have shown ferulic acid has anti-hyperlipidemic, anti-oxidative, and anti-inflammatory effects. The objective of this study is to investigate the effects of ferulic acid supplementation on lipid profiles, oxidative stress, and inflammatory status in hyperlipidemia. The study design is a randomized, double-blind, placebo-controlled trial. Subjects with hyperlipidemia were randomly divided into two groups. The treatment group (n = 24) was given ferulic acid (1000 mg daily) and the control group (n = 24) was provided with a placebo for six weeks. Lipid profiles, biomarkers of oxidative stress and inflammation were assessed before and after the intervention. Ferulic acid supplementation demonstrated a statistically significant decrease in total cholesterol (8.1%; p = 0.001), LDL-C (9.3%; p < 0.001), triglyceride (12.1%; p = 0.049), and increased HDL-C (4.3%; p = 0.045) compared with the placebo. Ferulic acid also significantly decreased the oxidative stress biomarker, MDA (24.5%; p < 0.001). Moreover, oxidized LDL-C was significantly decreased in the ferulic acid group (7.1%; p = 0.002) compared with the placebo group. In addition, ferulic acid supplementation demonstrated a statistically significant reduction in the inflammatory markers hs-CRP (32.66%; p < 0.001) and TNF-α (13.06%; p < 0.001). These data indicate ferulic acid supplementation can improve lipid profiles and oxidative stress, oxidized LDL-C, and inflammation in hyperlipidemic subjects. Therefore, ferulic acid has the potential to reduce cardiovascular disease risk factors.

Gibbs energy additivity approaches to QSRR in generating gas chromatographic retention time for identification of fatty acid methyl ester.

The Gibbs energy additivity method was used to correlate the retention time (t R) of common fatty acid methyl esters (FAMEs) to their chemical structures. The t R of 20 standard FAMEs eluted from three capillary columns of different polarities (ZB-WAXplus, BPX70, and SLB-IL111) under both isothermal gas chromatography and temperature-programmed gas chromatography (TPGC) conditions were accurately predicted. Also, the predicted t R of FAMEs prepared from flowering pak choi seed oil obtained by multistep TPGC with the BPX70 column were within 1.0% of the experimental t R. The predicted t R or mathematical t R (t R(math)) values could possibly be used as references in identification of common FAMEs. Hence, FAMEs prepared from horse mussel and fish oil capsules were chromatographed on the BPX70 and ZB-WAXplus columns in single-step and multistep TPGC. Identification was done by comparison of t R with the t R of standard FAMEs and with t R(math). Both showed correct identifications. The proposed model has six numeric constants. Five of six could be directly transferred to other columns of the same stationary phase. The first numeric constant (a), which contained the column phase ratio, could also be transferred with the adjustment of the column phase ratio to the actual phase ratio of the transferred column. Additionally, the numeric constants could be transferred across laboratories, with similar correction of the first numeric constant. The TPGC t R predicted with the transferred column constants were in good agreement with the reported experimental t R of FAMEs. Moreover, hexane was used in place of the conventional t M marker in the calculation. Hence, the experimental methods were much simplified and practically feasible. The proposed method for using t R(math) as the references would provide an alternative to the uses of real FAMEs as the references. It is simple and rapid and with good accuracy compared with the use of experimental t R as references.

Separation of Vitamin E on a 100-Å Phenogel Column.

The effect of π-electrons and hydroxyl group on the separations of vitamin E on a swelling-controlled polystyrene-divinylbenzene (Phenogel) column using toluene/isooctane as the mobile phase was investigated. The effect of the π-electrons was demonstrated in the baseline separation of α-tocopherol and α-tocotrienol on a 100-Å Phenogel column. In addition, baseline separation of α-, (ß- + Î³-)- and δ-tocopherol could be achieved on this column. The separation mechanism of these isomers are due to the difference in the interactions between the hydroxyl group on the chromanol ring of each tocopherol and the gel matrix caused by the steric hindrance of methyl group(s). It was concluded that solutes of the same molecular size but different in the polar groups could be separated on a high performance size-exclusion chromatography by controlling the swelling of the gel matrix via modification of the mobile phase.