Periodontal histomorphometry and status of aged sheep subjected to ovariectomy, malnutrition and glucocorticoid application.

OBJECTIVE: Ageing, hypogonadism, malnutrition, and the application of glucocorticoids have adverse effects on skeletal homeostasis. Herein we determined to which extent the periodontium undergoes catabolic changes under these conditions in a sheep model. METHODS: Six old sheep with a mean age of 7.5+/-1.0 years were subjected to ovariectomy, calcium/vitamin D-restricted diet, and intramuscular administration of approximately 2g methylprednisolone. Six adult sheep with a mean age of 3.8+/-0.9 years remained untreated and served as controls. First and second premolars of both jaws were subjected to histological analysis. The distances from the gingival margin (GM) and from the alveolar bone crest (ABC) to the cemento-enamel junction (CEJ) were determined. Periodontal attachment was given as the ratio between the dimension of the periodontal ligament and the alveolar bone. Clinical data were collected by counting the number of teeth missing, teeth with gingival recession, and teeth with a probing depth > 4 mm. RESULTS: We report that distance between GM and CEJ (2.1+/-1.7 mm and 6.6+/-2.6mm maxilla; -0.4+/-1.4 mm and 3.2+/-1.5 mm mandible), and between ABC and CEJ (-3.4+/-1.3mm and 1.8+/-2.7 mm maxilla; -3.5+/-1.1mm and -0.1+/-1.4mm mandible) are significantly lower in test than in control animals. In line with these findings, periodontal attachment was 67% in the maxilla and 86% in the mandible of the test group and almost completely preserved in the control group. Clinical evaluation showed that the overall number of teeth with recessions was significantly higher in the test compared to the control group (4.9+/-2.4 and 2.3+/-3.6), but not the number of teeth missing and teeth with a probing depth>4mm. CONCLUSIONS: Together these findings suggest that in sheep, the cumulating effects of ageing, hypogonadism, malnutrition and glucocorticoid application can cause substantial catabolic changes of the periodontium.

A sheep model for fracture treatment in osteoporosis: benefits of the model versus animal welfare.

Animal models are necessary to evaluate new options for the treatment of fractures in osteoporotic bone. They permit both the biological response of a living system and the influence of the pathological processes to be taken into account. A sheep model for osteoporosis was established by combining oestrogen deficiency, calcium and vitamin D-deficient diet with steroid medication. Bone mineral density (BMD) was reduced by >30% after 12 weeks of combined treatment. Osteoporosis similar to the human situation with corresponding changes in the micro-architecture and mechanical properties of bone was observed. This publication focuses on the impressive results obtained with the model and contrasts them with considerations of animal welfare. Considerable side-effects associated with steroid medication became manifest. Animals in the treatment groups showed signs of infection of various degrees due to the immunosuppressive effect of the medication. The infections were mostly caused by Corynebacterium pseudotuberculosis. Antibody testing revealed a 100% prevalence of infection in this breed of sheep. A modification of the steroid treatment, i.e. less-frequent injections, reduced the incidence of side-effects. This sheep model shows a significant and reproducible reduction in cancellous BMD of >30%, including relevant changes in biomechanical properties and increased fracture risk. However, the severity of the side-effects cannot be overlooked. The model must be improved if it is to be used in the future. Options to reduce the side-effects are discussed.

Factors affecting the stability of screws in human cortical osteoporotic bone: a cadaver study.

We investigated several factors which affect the stability of cortical screws in osteoporotic bone using 18 femora from cadavers of women aged between 45 and 96 years (mean 76). We performed bone densitometry to measure the bone mineral density of the cortical and cancellous bone of the shaft and head of the femur, respectively. The thickness and overall bone mass of the cortical layer of the shaft of the femur were measured using a microCT scanner. The force required to pull-out a 3.5 mm titanium cortical bone screw was determined after standardised insertion into specimens of the cortex of the femoral shaft. A significant correlation was found between the pull-out strength and the overall bone mass of the cortical layer (r(2) = 0.867, p < 0.01) and also between its thickness (r(2) = 0.826, p < 0.01) and bone mineral density (r(2) = 0.861, p < 0.01). There was no statistically significant correlation between the age of the donor and the pull-out force (p = 0.246), the cortical thickness (p = 0.199), the bone mineral density (p = 0.697) or the level of osteoporosis (p = 0.378). We conclude that the overall bone mass, the thickness and the bone mineral density of the cortical layer, are the main factors which affect the stability of a screw in human female osteoporotic cortical bone.

Mechanical performance of cylindrical and dual core pedicle screws in calf and human vertebrae.

INTRODUCTION: Failure of pedicle screws by loosening and back out remains a significant clinical problem. Pedicle screw fixation is determined by bone mineral density, pedicle morphology and screw design. The objective of this study was to compare the holding strength of newly developed dual core pedicle screws having a cylindrical design in terms of outer diameter and two cylindrical inner core regions connected by a conical transition with conventional cylindrical pedicle screws. MATERIALS AND METHODS: Fifty bovine lumbar vertebrae and 40 human lumbar vertebrae were used. Five different screws were tested in nine experimental "settings" and ten specimens each. The screws were tested for cranial displacement and pullout strength before and after 5,000 cycles of cranio-caudal loading. The tests included a setting with fully inserted and 4 mm backed out screws. For statistical analysis the incomplete balanced block design was used. RESULTS: Cyclic loading led to a decrease of pullout force between 24 and 31% and a 9% increase of displacement. The cylindrical screw designs were affected more than the dual core designs. The pullout force of cylindrical screws was smaller than of dual core screws. Even in a backed out condition dual core screws showed a significantly smaller displacement than cylindrical screws. CONCLUSION: Pedicle screws with the dual core design provide good anchorage in the vertebra.

[Experience in operations for scoliosis in patients with cerebral palsy]. / Erfahrungen mit operativer Skoliosekorrektur bei Patienten mit infantiler Zerebralparese.

AIM: Experiences in operation of scoliosis in cerebral palsy are very different. Therefore a therapeutic regiment does not exist. In this study we want to report our experiences. METHODS: This retrospective-clinical study (1986-2003) includes 46 patients with cerebral palsy who had been operated for scoliosis. The data focus in particular on the therapeutic strategies and its success and complications. Publications from 1946 to 2003 were reviewed and served for comparison. RESULTS: 28 female and 18 men during one period by median 3.4 years were after-observed. The post office-operationally reached correction of the curvature of all operation procedures was appropriate for median between 51 and 68 % depending upon localization of the curvature. In the last re-examination median a correction loss of 3-25 % existed. A fusion to S1 corrected a thoraco-lumbale or lumbale scoliosis significantly better than a fusion to L5. The posterior and the combined posterior-anterior operation procedure showed comparable correction results. The total complication rate was with 35 %. CONCLUSIONS: Due to good correction successes and smaller complication rate we favor a posterior-anterior operation procedure. A fusion to S1 is indicated with thoraco-lumbale and lumbale fusion. Altogether complication rate was reduced in patients with scoliosis and cerebral palsy after operation at the spinal column in the last years.

Direct adenoviral transfer of bone morphogenetic protein-2 cDNA enhances fracture healing in osteoporotic sheep.

Osteoporosis, a major public health burden, is associated with increased fracture risk. Fracture healing in osteoporosis is delayed, with reduced callus formation and impaired biomechanical properties of newly formed bone leading to high risk of fixation failure. Adenoviral gene transfer of bone morphogenetic protein-2 (BMP-2) has been shown to enhance fracture healing. This study evaluated the ability of gene transfer to enhance bone healing in osteoporosis. An established sheep model of osteoporosis with well-characterized alterations in fracture healing was used. Osteotomies were created surgically in the tibias of adult female sheep and monitored for 8 weeks, using radiographic, biomechanical, and histological methods. For pilot experiments, primary ovine osteoblasts and mesenchymal stem cells were transduced with a recombinant adenovirus carrying BMP-2 cDNA (Ad.BMP-2). Large increases in alkaline phosphatase production and mineralization confirmed the ability of human BMP-2 to stimulate osteoblastic differentiation in sheep. In vivo bending stiffness measurements during fracture healing as well as ex vivo torsional stiffness measurements demonstrated stiffer callus tissue after treatment with Ad.BMP-2. The differences were found mainly in the early fracture-healing period. Computed tomography demonstrated that animals receiving the BMP-2 cDNA had larger cross-sectional callus area and higher callus density. Histological examination of the tibias confirmed enhanced callus formation. Direct, local adenoviral delivery of an osteogenic gene thus led to enhanced healing of fractures in an ovine model of osteoporosis. These promising data encourage the further development of genetic approaches to enhance bone healing in patients suffering osteoporosis-associated fractures.

Effect of BMP-2 gene transfer on bone healing in sheep.

Critical size defects of bone and delayed fracture healing due to metabolic disorders are still problems in orthopaedic surgery. Adenoviral vectors encoding bone morphogenetic protein-2 (Ad.BMP-2) have been used to stimulate bone formation in small animals. The present study evaluated the use of direct adenoviral gene transfer for inducing bone formation in a large animal. Standardized iliac crest defects were created surgically on both sides of the pelvic bone of white mountain sheep. The efficiency of gene transfer was evaluated using recombinant adenoviruses carrying the cDNA for luciferase. High levels of transgene expression, restricted to the site of injection, were found for the 1st week. Transgene expression then fell considerably, but could still be detected for up to 5 weeks. To investigate the effect on bone healing, Ad.BMP-2 (10(11) particles in 200 mul saline) was unilaterally injected into iliac crest defects and into tibial osteotomies. The contralateral defects remained untreated to evaluate possible systemic effects. The controls were treated with saline solution. Bone formation within the defect, assessed by micro-computed tomography (CT) measurement at 8 weeks, and callus formation after osteotomy were significantly reduced following direct application of Ad.BMP-2. The retardation compared to untreated control animals was additionally found at the contralateral iliac crest indicating a systemic inhibitory effect. Histological analysis confirmed the CT measurement and showed an increased number of inflammatory cells within both defects. Antibodies against the adenovirus and the transgene product were detected in all treated animals. These data show a systemic retardation of bone formation following a single local injection of Ad.BMP-2 in sheep. This finding stands in contrast to the data obtained from small animal models. Further studies are needed to determine the contribution of the immune response to these results, and whether a lower dose of Ad.BMP-2 would be advantageous.

Image-based micro-finite-element modeling for improved distal radius strength diagnosis: moving from bench to bedside.

Although osteoporosis is characterized by quantitative (mass) and qualitative (structural) changes, standard clinical techniques (dual-energy X-ray absorptiometry, DXA) only measure the former. Three-dimensional micro-finite-element (micro-FE) models based on high-resolution images can account for structural aspects as well, and it has recently been shown that an improved prediction of distal radius strength is possible with micro-FE analysis. A clinical application of this technique, however, is limited by its high imaging and computational demands. The objective of this study is to investigate if an improved prediction of bone strength can be obtained as well when only a small part of the radius is used for micro-FE modeling. Images of a 1-cm region of the metaphysis of the distal radius of 54 cadaver arms (mean age: 82 +/- 9 SD) made with a three-dimensional peripheral quantitative computed tomography (pQCT) device at 165- micro m resolution formed the basis for micro-FE models that were used to predict the bone failure load. Following imaging, specimens were experimentally compressed to failure to produce a Colles'-type fracture. Failure loads predicted from micro-FE analyses agreed well with those measured experimentally (R2 = 0.66, p < 0.001). Lower correlations were observed with bone mass (R2 = 0.48, p < 0.001) and microstructural parameters (R2 = 0.47, p < 0.001). Hence, even when only a small region is modeled, micro-FE analysis provides an improved prediction of radius strength.

Biomechanical evaluation of healing in a non-critical defect in a large animal model of osteoporosis.

Current methods for fracture treatment in osteoporosis are not always sufficient. To develop new fixation strategies (both mechanical and biological) requires pre-clinical testing utilizing appropriate models. The aim of this study was to apply a recently developed sheep model of osteoporosis to the study of healing in a non-critical long bone defect. A standardized transverse mid-shaft tibial osteotomy (with a fracture gap of 3 mm) was performed in seven osteoporotic and seven normal sheep and stabilized with a special external fixator for 8 weeks. The fixator was used for weekly in vivo bending stiffness measurements. Ex vivo bending stiffness and torsional stiffness of the callus zone were also determined. Callus area, callus density, and osteoporosis status were determined at 0, 4, and 8 weeks using peripheral quantitative computed tomography. The increase of in vivo bending stiffness of the callus was delayed approximately 2 weeks in osteoporotic animals. A significant difference (33%) in torsional stiffness was found between the osteotomized and contralateral intact tibia in osteoporotic animals, but no significant difference occurred in normal sheep (2%). In osteoporotic animals, ex vivo bending stiffness was reduced 21% (p=0.05). Bending stiffness was correlated with callus density (r=0.76, r=0.53); torsional stiffness was correlated with callus area (r=0.60) and to a lesser extent with callus density (r=0.53). This study demonstrated a delay of fracture healing in osteoporotic sheep tibiae with respect to callus formation, mineralization, and mechanical properties.

Analysis of injuries in long-distance triathletes.

Triathlon is an individual sport consisting of three disciplines - swimming, cycling and running. Triathlon has changed from a novel appearance to a very popular Olympic sport within the last fifteen years. Nevertheless, there is not sufficient data about injuries in triathlon. The aim of this retrospective survey was to investigate the incidence of injuries according to class of injuries, anatomical sites and disciplines. Relations to age, sex, performance level, training habits and medical care were analysed. Questionnaires were sent to all German speaking participants of the Ironman Europe 2000. With a response rate of 35 %, 656 questionnaires met the inclusion criteria. At least one injury was experienced by 74.8 % (95 %-CI: 71.3-78.1) of all respondents during their active time in triathlon. 51.1 % (95 %-CI: 47.2-55.0) suffered one or more contusion/skin-abrasions, 33.1 % (95 %-CI: 29.5-36.8) muscle-/tendon-injuries, 29.0 % (95 %-CI: 25.5-32.6) ligament-/capsule-injuries and 11.9 % (95 %-CI: 9.5-14.6) fractures. Most of the injuries happened during cycling (54.8 % [95 %-CI: 51.9-57.8]) within training sessions. 18.7 % (95 %-CI: 16.4-21.2) of all injuries occurred while the athletes were competing. Considering the low number of competition hours per year, the incidence of injuries during competition was higher than during training session. Significant relations were found considering the age, performance level and weekly training hours of the triathletes. Older athletes sustained more fractures (p = 0.024), high performance athletes suffered more contusions/abrasions (p = 0.003) and muscle-tendon-injuries (p = 0.001) and athletes with a large number of weekly training hours suffered more muscle-tendon-injuries (p = 0.014). To summarize, injuries in triathlon seem to be related to age, performance level and weekly training hours, but not to sex, presence of training coach and medical care.

Impact of bone density on distal radius fracture patterns and comparison between five different fracture classifications.

OBJECTIVE: To investigate the impact of bone mineral density (BMD) and bone geometry on failure loads and fracture patterns of the distal radius and to compare 5 different fracture classifications. DESIGN: Biomechanical and radiologic in vitro study. SETTING: Research laboratory. MAIN OUTCOME MEASUREMENTS: A total of 118 intact human forearms from elderly donors were examined by means of conventional radiography and peripheral quantitative computed tomography (PQCT) to determine BMD and geometry. The forearms were subjected to a standardized biomechanical test simulating a fall on the outstretched hand. The distal radius fractures were classified from x-rays using the AO ( 33), Cooney ( 9), Fernandez ( 15), Frykman ( 17), and Melone ( 31) classifications. The grading was repeated after preparation and direct visual inspection of the fracture site and was correlated with radiographic results. Fracture patterns also were correlated with BMD and geometry. RESULTS: Correlations between bone properties and fracture patterns (r = 0.09-0.70) suggested an increase in the severity of fractures with decreasing bone quality. The highest correlation between failure load and bone properties was found for the cortical area (r = 0.70) and trabecular density (r = 0.60). Good correlations between radiographic and direct visual classification were obtained for the Cooney ( 9) (r = 0.70), the AO ( 33) (r = 0.68), and the Fernandez ( 15) (r = 0.65) classifications. Smaller values were found for the Frykman ( 17) (r = 0.44) and the Melone ( 31) (r = 0.27) classifications. CONCLUSIONS: With increasing osteopenia, the load to failure decreases, and the severity of fractures increases. Fracture patterns in this patient population can be adequately graded with the AO ( 33) and Cooney ( 9) classifications. The severity of distal radius fractures tends to be underestimated by conventional x-ray examination, which needs to be taken into account when a fracture treatment plan is selected.

[Eikenella corrodens-induced spondylitis. Detection with 16s-RNA polymerase chain reaction]. / Eikenella-corrodensinduzierte Spondylitis. Nachweis mittels 16s-RNA-Polymerasekettenreaktion.

Isolation of the relevant organism in patients with spondylitis even after an open biopsy is successful only in 75-90%. The rare case of an Eikenella corrodens-induced spondylitis is presented, which could only be identified using 16S ribosomal DNA polymerase chain reaction following unsuccessful microbiological cultivation. Eikenella corrodens is a facultative anaerobic gram-negative organism, which is mostly found in the oropharynx of healthy patients.

Effect of ovariectomy, malnutrition and glucocorticoid application on bone properties in sheep: a pilot study.

The demographic changes in the human population continue to lead to an increasing incidence of osteoporosis. The main clinical symptom of osteoporosis is fracture. Fracture fixation in osteoporosis is frequently complicated by failure of fixation. There is a great need for a large-animal model of osteoporosis for controlled studies, which allows the investigation of fracture healing and fracture treatment in weak bone. Eight swiss mountain sheep, 7-9 years old, were divided into four treatment groups of two animals each. Group 1 was ovariectomized and fed a calcium/vitamin D-restricted diet (O+D). Group 2 was ovariectomized and given a daily intramuscular injection of 25 mg methylprednisolone (O+S). Group 3 was ovariectomized, fed a calcium/vitamin D-restricted diet and injected with 25 mg intramuscular methylprednisolone per day (O+D+S). Group 4 was used as an untreated, not sham operated control group. At the beginning of the study and every 2 months for 6 months the bone mineral density (BMD) was determined using quantitative computed tomography (pQCT) at the distal radius. Biopsies were taken after 6 months from vertebral bodies and femoral heads and the bone structure, i.e. trabecular thickness (Tb.Th), trabecular number (Tb.N), trabecular separation (Tb.Sp), bone surface fraction (BS/BV) and bone volume fraction (BV/TV), was determined by micro-CT. In vitro compression testing of the biopsies was performed to determine failure load and stiffness. The control group showed no changes in BMD. The greatest decrease in BMD was seen in group 3 (O+D+S), which had a decline of 58% in cancellous bone and 22% in cortical bone. In the vertebral body biopsies a prominent change in structural parameters was observed (Tb.N, -53%; Tb.Th, -63%, Tb.Sp, +150%). The changes were less pronounced in the femoral head biopsies. In the compression test the vertebral body biopsies of group 3 (O+D+S) had stiffness values 40% lower failure load 70% lower compared with the control group. The most effective method of inducing osteoporosis in sheep was found to be the combined treatment. These results need to be confirmed in a larger number of animals.

Estimation of distal radius failure load with micro-finite element analysis models based on three-dimensional peripheral quantitative computed tomography images.

There is increasing evidence that, in addition to bone mass, bone microarchitecture and its mechanical load distribution are important factors for the determination of bone strength. Recently, it has been shown that new high-resolution imaging techniques in combination with new modeling algorithms based on the finite element (FE) method can account for these additional factors. Such models thus could provide more relevant information for the estimation of bone failure load. The purpose of the present study was to determine whether results of whole-bone micro-FE (microFE) analyses with models based on three-dimensional peripheral quantitative computer tomography (3D-pQCT) images (isotropic voxel resolution of 165 microm) could predict the failure load of the human radius more accurately than results with dual-energy X-ray absorptiometry (DXA) or bone morphology measurements. For this purpose, microFE models were created using 54 embalmed cadaver arms. It was assumed that bone failure would be initiated if a certain percentage of the bone tissue (varied from 1% to 7%) would be strained beyond the tissue yield strain. The external force that produced this tissue strain was calculated from the FE analyses. These predictions were correlated with results of real compression testing on the same cadaver arms. The results of these compression tests were also correlated with results of DXA and structural measurements of these arms. The compression tests produced Colles-type fractures in the distal 4 cm of the radius. The predicted failure loads calculated from the FE analysis agreed well with those measured in the experiments (R(2) = 0.75 p < 0.001). Lower correlations were found with bone mass (R(2) = 0.48, p < 0.001) and bone structural parameters (R(2) = 0.57 p < 0.001). We conclude that application of the techniques investigated here can lead to a better prediction of the bone failure load for bone in vivo than is possible from DXA measurements, structural parameters, or a combination thereof.

Bone changes due to glucocorticoid application in an ovariectomized animal model for fracture treatment in osteoporosis.

In a pilot experiment comparing four different modalities for inducing osteoporosis in the sheep, a combination of ovariectomy, calcium/vitamin D-restricted diet and steroid administration was found to generate the highest decrease in bone mineral density (BMD). The aim of the present study was to quantify the outcome of this triple treatment in an animal model of osteoporosis in terms of alteration in bone mass, bone structure and bone mechanics. A total of 32 sheep were divided into two equal groups. Group 1 (age 3-5 years) was used as a normal control. Group 2 (age 7-9 years) was ovariectomized, fed a calcium/vitamin D-restricted diet and injected with methylprednisolone (MP) over 7 months (22 weeks MP solution, 6 weeks MP suspension). The BMD at the distal radius and tibia was determined preoperatively and at repeated intervals bilaterally using quantitative computed tomography. Steroid blood levels were determined 4 and 24 h after selected injections. BMD was measured at L3 and L4 after 7 months. Biopsies were taken from iliac crests, vertebral bodies and femoral heads, and bone structure parameters investigated by three-dimensional micro-CT. Compressive mechanical properties of cancellous bone were determined from biopsies of vertebral bodies and femoral heads. After 7 months of osteoporosis induction the BMD of cancellous bone decreased 36 +/- 3% in the radius and 39 +/- 4% in the tibia. Steroid blood levels 24 h after injection of MP suspension were significantly higher than after injection of MP solution. Changes in structural parameters of cancellous bone from the iliac crest, lumbar spine and femoral head in group 2 indicated osteoporosis-associated changes. In group 2 there was a significant reduction in BMD of the lumbar spine and a significant reduction in stiffness and failure load in compression testing of biopsies of lumbar vertebrae. In sheep, changes in the structural parameters of bone such as trabecular number and separation during osteoporosis induction are comparable to the human situation. The sheep model presented seems to meet the criteria for an osteoporosis model for fracture treatment with respect to mechanical and morphometric bone properties.

Comparison of the in vitro holding strengths of conical and cylindrical pedicle screws in a fully inserted setting and backed out 180 degrees.

Previous investigations have suggested that conical and cylindrical pedicle screws have comparable holding strengths. So far, the remaining performance in screws turned back or loose as a result of other reasons has not been determined. Twenty-four cadaveric spines from 6- to 8-week-old calves were examined. After bone mineral density was determined, four pedicle screws (two conical and two cylindrical screws) were inserted. The screws were fully inserted and half of them turned back 180 degrees. Twenty-four axial pullout and 24 cyclic loading tests with subsequent pullout tests were conducted. The pullout strengths of conical screws turned back 180 degrees are significantly smaller (1.8 kN) than those of cylindrical screws (4.3 kN). After cyclic loading, the displacement of conical screws is significantly greater (6.9 mm) than that of cylindrical screws (4.7 mm). Pedicle screws, especially conical ones, need to be placed to a correct depth, and they should not have to be backed out.

Sheep model for fracture treatment in osteoporotic bone: a pilot study about different induction regimens.

OBJECTIVE: Various regimens to induce osteoporosis in sheep were compared to establish a large animal model for further studies of fracture healing and fracture treatment in severe osteoporosis. DESIGN: Prospective, randomized animal study (six months' duration). PARTICIPANTS: Eight sheep (seven to nine years old) were divided into four treatment groups of two animals each. INTERVENTION: Group 1: Ovariectomy (OVX) + calcium/vitamin D-restricted diet (O + D); Group 2: Ovariectomy + daily injection of steroids (O + S); Group 3: Ovariectomy + daily injection of steroids + calcium/vitamin D-restricted diet (O + D + S); Group 4: Control, untreated. MAIN OUTCOME MEASUREMENTS: Preoperatively and every 2 months, the bone mineral density (BMD) was determined by quantitative computed tomography (QCT) bilaterally at the distal tibia. Bone structural parameters were determined from iliac crest biopsy specimens using micro-CT. In vitro torsional stiffness of tibia segments was measured. RESULTS: The control group showed a slight increase in BMD with time. The greatest decrease in BMD was seen in Group 3, with a decrease of 55 percent in cancellous bone and 7 percent in cortical bone. In the iliac crest biopsy specimens, trabecular number decreased 19 percent, trabecular thickness decreased 22 percent, and bone volume fraction decrased 37 percent during the 6 months. The torsional strength and stiffness of the tibia showed a difference of approximately 50 percent between Group 3 and the control group. CONCLUSIONS: The induction of severe osteoporosis in sheep is best possible by combined treatment with ovariectomy, calcium/vitamin D-restricted diet, and steroids. There is a good relationship between density, structural parameters, and mechanical properties of bone.