Fatty acid-binding protein 5 limits the anti-inflammatory response in murine macrophages.

The beginning stages of liver damage induced by various etiologies (i.e. high fat diet, alcohol consumption, toxin exposure) are characterized by abnormal accumulation of lipid in liver. Alterations in intracellular lipid transport, storage, and metabolism accompanied by cellular insult within the liver play an important role in the pathogenesis of liver disease, often involving a sustained inflammatory response. The intracellular lipid transporter, fatty acid binding protein 5 (FABP5), is highly expressed in macrophages and may play an important role in the hepatic inflammatory response after endotoxin exposure in mice. This study tested the hypothesis that FABP5 regulates macrophage response to LPS in male C57bl/6 (wild type) and FABP5 knockout mice, both in vitro and in vivo. Treatment with LPS revealed that loss of FABP5 enhances the number of hepatic F4/80(+) macrophages in the liver despite limited liver injury. Conversely, FABP5 knock out mice display higher mRNA levels of anti-inflammatory cytokines IL-10, arginase, YM-1, and Fizz-1 in liver compared to wild type mice. Bone marrow derived macrophages stimulated with inflammatory (LPS and IFN-γ) or anti-inflammatory (IL-4) mediators also showed significantly higher expression of anti-inflammatory/regulatory factors. These findings reveal a regulatory role of FABP5 in the acute inflammatory response to LPS-induced liver injury, which is consistent with the principle finding that FABP5 is a regulator of macrophage phenotype. Specifically, these findings demonstrate that loss of FABP5 promotes a more anti-inflammatory response.

Quantification of total fatty acids in microalgae: comparison of extraction and transesterification methods.

Determination of microalgaes' fatty acid content is often done with chloroform and methanol according to the Bligh and Dyer extraction, though faster methods exist. A number of comparisons between the Bligh and Dyer and faster methods have resulted in contradicting data, possibly due to differences in algae used and the different versions of the Bligh and Dyer method applied. Here, various forms of direct-transesterification (D-TE) and two-step transesterification (2-TE), including three versions developed in our lab, are compared with the original Bligh and Dyer (Can J Biochem Physiol 37: 911-917, 1959) extraction and two modifications thereof (Lee et al. J AOAC Int 79:487-492, 1996, and our own acidified version) on microalgae with different cell walls: Isochrysis galbana, Nannochloropsis oculata, and Phaeodactylum tricornutum. In total, fatty acid extracts from 11 methods were separated and quantified by gas chromatography with mass spectrometry. Results show that, for N. oculata and P. tricornutum, methods based on chloroform-methanol underestimated the fatty acid content compared with the 2-TE and D-TE methods, which gave similar results. Moreover, D-TE methods are faster than chloroform-methanol methods and use chemicals that are less toxic. Of the D-TE methods, the ones using hydrochloric acid and sulfuric acid recovered the most fatty acids, while boron trifluoride recovered slightly less. The main qualitative difference between the fatty acids recovered was that the chloroform-methanol methods recovered less saturated fatty acids in P. tricornutum.

Contamination dose from photoneutron processes in bodily tissues during therapeutic radiation delivery.

Dose to the total body from induced radiation resulting from primary exposure to radiotherapeutic beams is not detailed in routine treatment planning though this information is potentially important for better estimates of health risks including secondary cancers. This information can also allow better management of patient treatment logistics, suggesting better timing, sequencing, and conduct of treatment. Monte Carlo simulations capable of taking into account all interactions contributing to the dose to the total body, including neutron scattering and induced radioactivity, provide the most versatile and accurate tool for investigating these effects. MCNPX code version 2.2.6 with full IAEA library of photoneutron cross sections is particularly suited to trace not only photoneutrons but also protons and heavy ion particles that result from photoneutron interactions. Specifically, the MCNPX code is applied here to the problem of dose calculations in traditional (non-IMRT) photon beam therapy. Points of calculation are located in the head, where the primary irradiation has been directed, but also in the superior portion of the torso of the ORNL Mathematical Human Phantom. We calculated dose contributions from neutrons, protons, deutrons, tritons and He-3 that are produced at the time of photoneutron interactions in the body and that would not have been accounted for by conventional radiation oncology dosimetry.

The evaluation of a clinical thermometer for measuring developer temperature in automatic film processors.

In medical imaging, the temperature of the developer solution in the film processor affects film speed (radiation dose), film contrast, and film base plus fog. The National Council on Radiation Protection and Measurement (NCRP) Report 99 on Quality Assurance, and the American College of Radiology (ACR) Mammography Quality Control Manual for Radiologic Technologists, indicate that the developer temperature should be within +/- 0.5 degree F (+/- 0.3 degree C) of that recommended by the manufacturer for the specific film/developer combination being used. The accuracy and repeatability of the thermometer is most important. This paper describes the requirements of a thermometer for measuring the temperature of the developer solution and suggests an inexpensive but accurate device for doing so.

Osteoid osteoma of the great toe.

Osteoid osteoma is a benign tumor which most commonly affects adolescents and young adults. Although this lesion occurs predominantly in the lower extremities, it has been described in the great toe only once before in medical literature. This bone lesion causes acute localized pain, worse at night, and it is relieved by aspirin or other anti-inflammatory medications. Treatment of choice is en bloc excision of the lesion. The prognosis with appropriate diagnosis and treatment is excellent.

Elastin VIII. A correlative study of the aging elastica of arteries and skin.

Nigrosin base in an acid alcohol solution and Gomori's aldehyde fuchsin gave excellent staining of the elastic fibers in the arteries and skin regardless of age. Neutral hydroalcohol solutions of alcohol soluble nigrosin stained the elastic fibers in the arteries and skin of humans above age 20. Clara's neutral hematoxylin stained the arterial elastica of children less than 10 years of age, but did not color the elastic fibers of the skin. By these staining procedures, it may be possible to obtain information about arterial elastica by a skin biopsy.

Borax methylene blue: a spectroscopic and staining study.

Borax methylene blue is quite stable at room temperatures of 22-25 C. At 30 C polychroming is slow; during 50 days in a water bath at this temperature the absorption peak moves from 665 to 656 nm. At 35 C, the absorption peak reaches 660 nm in 7 days, 654 nm in 14. At 60 C polychroming is rapid, the absorption peak reaching 640-620 nm in 3 days. When the pH of the borax methylene blue solutions, normally about 9.0, is adjusted to pH 6.5, the absorption peak remains at 665 nm even when incubated at 60 C for extended periods. When used as a blood stain 0.4 ml borax methylene blue (1% methylene blue in 1% borax), 4 ml acetone, 2 ml borax-acid phosphate buffer to bring the solution to pH 6.5, and distilled water to make 40 ml, with 0.2 ml 1% eosin added just before using, an excellent Nocht-Giemsa type stain is achieved after 30 minutes staining. The material plasmodia P. falciparum, P. vivax, and P. berghei stain moderate blue with dark red chromatin and green to black pigment granules. The study confirms Malachowski's 1891 results and explains Gautier's 1896-98 failure to duplicate it.

Acetic orcein staining of prefixed tissue sections.

Acetic orcein stains formol- and Carnoy-fixed tissues, coloring mast cells, nuclei, basophilic cytoplasm, cerebral corpora amylacea, and cartilage strongly; keratin and erythrocytes moderately; muscle and collagen weakly. Guinea pig Brunner gland and rat colonic goblet cell mucins did not stain. The red nuclear stain contrasts well with the Prussian blue reaction of hemosiderin and the ferric ferricyanide (Turnbull's blue) reaction of enterochromaffin. A weak (0.01%) fast-green FCF stain changes collagen and sometimes smooth muscle to green, without impairing nucleic acid or mast cell staining. Picroindigocarmine gives blue collagen, yellow muscle, and red elastin, nucleic acids and mast cells. Picro-methyl blue tends to override the red nuclear stain. Carnoy fixation is somewhat better for nuclei, formol for basophil cytoplasms.

Lower azure B methylene blue ratios in Giemsa type blood and malaria stains.

Starting from ancient reports that rare samples of methylene blue were apparently sufficiently contaminated with azures to give red plasmodial and red purple nuclear chromatin in Chenzinsky type methylene blue eosin stains, it was decided to determine how little azure B would suffice for such staining in methylene blue eosin stains. The traditional 1902 Giemsa had an azure : methylene blue : eosin ratio of about 6 : 3 : 6.3 : 10; Lillie's 1943 formula had a 5 : 7 : 10 ratio. In the current series of tests 5 : 7 : 10 (I), 4 : 8 : 10 (II), 3 : 9 : 10 (III), 2 : 10 : 10 (IV), 1 : 11 : 10 (V), and 0 : 12 : 10 (VI) were used. Malaria and blood stains were better than the standard 5 : 7 : 10 (I) in III, IV and II in that order. Normal and leukemic human blood, mouse blood with Plasmodium berghei, and monkey blood with the CDC strain of Pl. falciparum were used as test materials. The staining mixtures were made from highly purified samples of azure B and methylene blue. Staining mixtures contained 12 ml 0.1% thiazin dye, 10 ml 0.1% eosin, 2 ml each of glycerol, methanol and 0.1 M phosphate buffer pH 6.5, 3 ml acetone as accelerator, and distilled water to make 40 ml; staining times of 10--30 min were used.