RESUMO
Memristors integrated into a crossbar-array architecture (CAA) are promising candidates for analog in-memory computing accelerators. However, the relatively low reliability of the memristor device and sneak current issues in CAA remain the main obstacles. Alkali ion-based interface-type memristors are promising solutions for implementing highly reliable memristor devices and neuromorphic hardware. This interface-type device benefits from self-rectifying and forming-free resistive switching (RS), and exhibits relatively low variation from device to device and cycle to cycle. In a previous report, we introduced an in situ grown Na/TiO2 memristor using atomic layer deposition (ALD) and proposed a RS mechanism from experimentally measured Schottky barrier modulation. Self-rectifying RS characteristics were observed by the asymmetric distribution of Na dopants and oxygen vacancies as the Ti metal used as the adhesion layer for the bottom electrode diffuses over the Pt electrode at 250 °C during the ALD process and is doped into the TiO2 layer. Here, we theoretically verify the modulation of the Schottky barrier at the TiO2/Pt electrode interface by Na ions. This study fabricated a Pt/Na/TiO2/Pt memristor device and confirmed its self-rectifying RS characteristics and stable retention characteristics for 24 h at 85 °C. Additionally, this device exhibited relative standard deviations of 27 and 7% in the high and low resistance states, respectively, in terms of cycle-to-cycle variation. To verify the RS mechanism, we conducted density functional theory simulations to analyze the impact of Na cations at interstitial sites on the Schottky barrier. Our findings can contribute to both fundamental understanding and the design of high-performance memristor devices for neuromorphic computing.
RESUMO
Ionic memristor devices are crucial for efficient artificial neural network computations in neuromorphic hardware. They excel in multi-bit implementation but face challenges like device reliability and sneak currents in crossbar array architecture (CAA). Interface-type ionic memristors offer low variation, self-rectification, and no forming process, making them suitable for CAA. However, they suffer from slow weight updates and poor retention and endurance. To address these issues, the study demonstrated an alkali ion self-rectifying memristor with an alkali metal reservoir formed by a bottom electrode design. By adopting Li metal as the adhesion layer of the bottom electrode, an alkali ion reservoir was formed at the bottom of the memristor layer by diffusion occurring during the atomic layer deposition process for the Na:TiO2 memristor layer. In addition, Al dopant was used to improve the retention characteristics by suppressing the diffusion of alkali cations. In the memristor device with optimized Al doping, retention characteristics of more than 20 h at 125 °C, endurance characteristics of more than 5.5 × 105, and high linearity/symmetry of weight update characteristics were achieved. In reliability tests on 100 randomly selected devices from a 32 × 32 CAA device, device-to-device and cycle-to-cycle variations showed low variation values within 81% and 8%, respectively.
